A good question that can save people a lot of headache in a production
environment.
When you download the IOS from CCO, there's a table that lists the filename,
file size, date published and a more info hyperlink (shown as a "?"
character.) Click on the question mark. One of the items listed is
t help
either.
Please advice.
Thanks.
Ryan
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Just wrote the CCIE Written. Plenty of folks on this list have also done so
lately, so I wouldn't bother with my review, except my perceptions were a
little different than those of Chuck et. al.
Biggest difference from previous reviews was that my test did not have a lot
of Token Ring /
Andrew,
Try turning on "debug ip eigrp adjacencies" to see if you can find out what
the problem is. This should lead you in the right direction.
-Chuck
- Original Message -
From: "Andrew Larkins" [EMAIL PROTECTED]
To: "Cisco Mail List" [EMAIL PROTECTED]
Sent: Wednesday, November 01,
You can practice your BGP with as little as 2 2501 routers connected
back-to-back. Seeing how your home lab setup will not be (at least it
shouldn't be) connected to the internet, feel free to inject as many routes
as you wish while you are practicing.
-Chuck
- Original Message -
From:
Are there a lot of Stratacom ??? on the CID? I am taking the exam on
Thursday and the book I am usins does not go into much detail..
Ryan
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Try this again
Are there many Stratcom ?? on the CID. I am taking the exam on Thursday and
the book I am using does not cover them in detail.
Thanks,
Ryan Sheahan
Network Engineer CCNP, CCDA, NCAE
Greenwhich Technology Partners
_
FAQ, list archives
I think the following URL will give you the answers you are looking for:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_c
/1cprt1/1cbgp.htm#xtocid2807715
-Chuck
- Original Message -
From: "John Zaggat" [EMAIL PROTECTED]
To: "CiscoGroupstudy" [EMAIL
- Original Message -----
From: "Sam LI" [EMAIL PROTECTED]
To: "Charles Ryan" [EMAIL PROTECTED]; "Fanglo P.M. MA"
[EMAIL PROTECTED]
Cc: "Cisco List" [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 9:42 PM
Subject: Re: BGP home lab
are you sure that
Ryan Ngai @ ENT
E-mail: hkngaiExt:6805
-Original Message-
From: Ryan Ngai Hon Kong
Sent: Tuesday, October 17, 2000 12:00 PM
To: '[EMAIL PROTECTED]'
Subject: Firewall in ATM environment (design question).
Hi guys,
Just another design question.
- non cisco ATM
confuse with this, but it's an opinion from
friends).
Please
feel free to look into the diagram at http://www.geocities.com/ryanhk/diagram.jpg
Thank
you.
Ryan Ngai @ ENTE-mail: hkngai
Ext:6805
-Original Message-From: Greene, Patrick
[mailto:[EMAIL PROTECTED]]Sent: Tuesday, October
Try setting encapsulation to "frame-relay ietf" and LMI type to "ansi" or
"ansi annex d"
-Chuck
- Original Message -
From: "Hans Stout" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 10, 2000 2:24 PM
Subject: Frame Relay problem
Hi colleagues,
I have a problem with
I just finished up the CCNP this weekend and was wondering if anyone could
suggest a book for the CCDA 2.0.
thanks,
Ryan Sheahan
Internetworking Engineer CCNP, NCAE
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
Shawn,
Looks like you need more bandwidthtake a look at the load on the
interface (224/255). This circuit is pretty much maxed out. I see your BW is
set for 768kbmight look into going all the way with a full T1. Also, you
can try changing your queueing from FIFO to WFQ (weighted-fair
In your traceroute, the router has multiple paths to the destination, that's
why you get the output that you have below. On your router, if you do a
"show ip route www.ibm.com", note the next hop address, then do a show ip
route on that next hop ip address, chances are you will have multiple
I passed the BCRAN exam this past weekend with an 853. Not the best score,
but I got it over with.
Thanks to all for the help. One more to go, Support 2.0
Any advice would be much appreciated.
Thanks,
Ryan Sheahan
Internetworking Engineer CCNA, NCAE
Greenwhich Technology Partners
It was recomended in a book I recently read to set the dialer-idle timout to
2147843, for permanent connections. Not sure if it works, I have not tried
it. Just going by the book.
RS
-Original Message-
From: Rue Barb the Tangled
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: 8/29/00
I have done with with IPSec. You need CheckPoint 4.1 aka 2000 to run 3Des.
-Original Message-
From: vr4drvr . [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 21, 2000 3:30 PM
To: [EMAIL PROTECTED]
Subject: OT: Cisco + Checkpoint
Hi. Has anyone set up a VPN with a cisco router going
In preparing for the BCRAN exam would you suggest I study the CLI well
enough to be able to re-enter the commands. Similar to the Routing exam?
Thanks,
Ryan Sheahan
Internetworking Engineer CCNA, NCAE
Greenwhich Technology Partners
http://www.greenwichtech.com
I have been using an 1601 R and a bridge work fine.
-Original Message-
From: Frank Wells [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 08, 2000 11:48 AM
To: [EMAIL PROTECTED]
Subject: Router to DSL line compatibility
Hey folks,
Has anyone used a dual ethernet router to connect their
I have woked with Unicentre takes lots and lots of time to setup but is nice
when it is all done.
-Original Message-
From: Dinesh_Kakkar [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 5:23 AM
To: '[EMAIL PROTECTED]'
Subject: Network mangement suite
Dear all
I am looking for
I didnt get any sniffer training in CIT, all trouble shooting was done with
debug commands. Its a great class though lots of hands on labs.
A good source would be Sniffer University @ Network Associates
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
One of the best VoIP books is
Voice over IP by Uyless Black
ISBN 0-13-022463-4
I found some of the best prices at booksamillion.com, pay the extra 5.00 for
the membership and the prices come down even more. Its pretty great!
-Ryan
-Original Message-
From: [EMAIL PROTECTED] [mailto
ok I was thinking of doing the exam but can anyone recommend the best books
or willing to give up the course material in exchange for a no name brand
ketchup bottle? Has anyone used the Boson practice tests?
also my boss pays me squat and need to know how much you condiment engineers
make blah
-group 1
!
router ospf 100
network 10.39.18.6 0.0.0.0 area 0
network 10.39.19.6 0.0.0.0 area 0
!
dialer-list 1 protocol ip permit
Thanks,
Ryan Moffett
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info
OSPF still fails...
Ryan
""Aaron K. Dixon"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
It looks like you mistyped the ospf statements in router 2. Under the
ospf
process you specify addresses that have the 2nd octet of .39 wh
ur dialer map commands.
ie.
dialer map ip 10.36.19.6 broadcast
Regards,
Aaron K. Dixon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ryan Moffett
Sent: Saturday, July 29, 2000 8:51 PM
To: [EMAIL PROTECTED]
Subject: Re: OSPF Demand Circuit -
Hi all. Passed CCNA 1.0 yesterday. 897/1000. It
wasn't too bad, about a 30 minute test.
Used Syngress guide, Cisco Certification exam
guide, boson. Good prep. Needed to know ISDN protocols, zones.
Thanks to everyone who posts good inforation on
this list. It helps a lot.
John Ryan
CCNA
In theory wouldnt the utilization of extended access lists be layer 4
switching?
- Original Message -
From: "rucha" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 13, 2000 7:39 PM
Subject: Cisco Said their Catalyst 55XX Support Lay 4-7 Function,does it
true?
Hello ,
We use
TNG you can also look at NetworkIT http://www.cai.com
-Original Message-From: Deepak Sharma
[mailto:[EMAIL PROTECTED]]Sent: Sunday, July 09, 2000 8:46
PMTo: cisco; Diraj Goel; 'Roger Szulc'; Ben; Surinder; Ian White;
Ziendy; ziendy nillasSubject: network mangement
You need to get an ASN
Ryan,
-Original Message-
From: Gary Alterson
To: Cisco@Groupstudy. Com
Sent: 7/10/00 11:58 PM
Subject: BGP and DSL backup
Is there anyone out there that's using a DSL line as a backup to their
primary Ineternet connection? Is there anything special I need
Is anyone using a
Cisco router with CoVad un bridge ? I need to setup an VPN with IPSEC and
I need to start the VPN in the router and all CoVad will sell me is
Netopia.
Ryan V.
FinneseyNetwork Administrator @tmosphere Interactive 1375 Broadway, 11th floor New York, NY 10018 212 827 2507
The biggest connectivity issues are related to Auto-Sensing. Make sure that
you force the ports on the switch to what the end users have. Also on a
client side you might want to make it fixed as well. Auto-sensing in general
is a pain in the butt!
-Ryan
- Original Message -
From: "
To make the doc CD work under win2k with IE, you need to venture into the
registry before installation.
Go to:
HKLM/Software/Microsoft/IE4/Setup
The Path variable contains a relative path. Replace this with a physical
path, usually C:\Program Files\Internet Explorer.
This has worked every
Curious on the level
of difficulty of each CCNP Exam, anyone want to comment?
Thanks
Ryan
Hi
all
Can I have a cisco
router/Switch log some on with a Radus Server like FUNKRadus or do I need to use
tacacs+ ? What I would like to do is give router/switch access based
on your NT Group and I think this can be done with Radus am I right
?
Ryan V.
FinneseyNetwork Administrator
I would imagine logging out of the router would do the sameping is run
in exec mode...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Albert Ip
Sent: Thursday, June 08, 2000 10:27 PM
To: 'Lawrence Dwyer'; 'Groupstudy'
Subject: RE: Stopping Ping
I have done this a number of times, can you post "sanitized" versions of
your configs?
Ryan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
vr4drvr .
Sent: Wednesday, June 07, 2000 2:33 PM
To: [EMAIL PROTECTED]
Subject: gre/ipsec
i'm tryin
Andy Harding wrote on 6/5/00 4:06 pm:
spot on - draft available at:
ftp://p8021:-go_wildcats@p
8021.hep.net/8021/s-drafts
/d4/802-1s-d4.pdf
don't know about spanning
forest tho...;-)
cheers
Andy
- Original Message -
From: Eric Fairfield
Newsgroups:
groupstudy.cisco
To:
Justin,
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur
_c/scprt3/index.htm
Take a look at the Context Based Access Control and the various other
firewall features.
Ryan Moffett
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Those objectives at the Global Knowledge web site are straight from the ACRC
course. Although I have not taken the Routing 2.0 exam, I recall the
consensus on Groupstudy was that the test did not resemble the current ACRC
very much at all.
Long story short, I wouldn't trust that outline until
of raises.
-Ryan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Brad Ellis
Sent: Sunday, June 04, 2000 12:06 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco Certified Salaries
Chad,
With 3 months of experience what do you expect??? $150k/yr? You still
time and assistance on the phone and in NYC at the group.
I
would also like to thank Ryan Finnesy, Chuck, Howard, Joe Martin and
all
the rest (to
many to name) for the help, feedback and support they have given. I
will
be happy to help and answer any questions that I can. Thanks everybody
I know this isn't really the right question to ask here...
I am looking for a better news group or web site that I could advertise a
trade, anything for just network equipment? Not interested in Etrade or
other auction sites yet.
I have a 3Com 12 port GigaSwitch (Superstack II 9300) its in
group using the "frame-relay map bridge" command. An
example is given here:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_r
/wrfrelay.htm#xtocid18778220
Ryan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Yuen Me
Se
One of industry's best bandwidth utilization tools is freeware!
Its called MRTG, runs in NT or Solaris. I used it for a few years now. Works
great and most ISP's and NAPs use it
check out http://www.mrtg.org
-Ryan
[EMAIL PROTECTED] wrote in message
8gkdfg$uuj$[EMAIL PROTECTED]">new
I need the pinout for db9m to rj45f so I can connect my 2502 to a token ring
hub. Thanks.
Ryan
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct
201 - 247 of 247 matches
Mail list logo
