Question on ISP track

Could someone please recommend some good books for the track below. Core/Pop technologies ,DSL, Dial, Cable, Wireless, or Optical. Elements of WAN Switching and Dial. It is for the new track Cisco will be offering as a beta. I would like to get some books before hand to study on so that I don'

VLAN question

I will just like to enquire whether it is possible to have a VLAN split over 2 lans divided by a point-to-point Frame-relay wan. VV LL AA N 4MEG WAN N 50 50 At both LA

Cisco 3640 PRI module cable pinout

I am going to connect a cable from the telco's chrono directly to the PRI module on the 3640. I need the pinouts for the cable from the chrono to the port.I am using cat5 cable. This is what I have found but I am unsure whether it is correct to use as I don't want to blow the module port. Pin

help

I am going to connect a cable from the telco's chrono directly to the PRI module on the 3640. I need the pinouts for the cable from the chrono to the port.I am using cat5 cable. This is what I have found but I am unsure whether it is correct to use as I don't want to blow the module port. Pinout

BSCN

I will be writing my bscn on friday and would like some tips or pointers before I write. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archive

CID Beta

I just checked the Cisco Beta Exam area and it states that the beta is closed as of 7 December.Does this mean the anyone who has booked for after that day cannot write ? _ Get more from the Web. FREE MSN Explor

CID Beta

Well I wrote the CID Beta exam earlier today and damn was it crap.My exam said Cisco Secure VPN on the top.It seemed like it was a test that was made up of alot of different tests.I did'nt know that Voice and VPN and numerous other non related design topics were part of the new CID.I used the S

Cisco 1601 AUI

Could someone please provide some commands for configuring a 1601 AUI port as the ethernet one is blown. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _

Cisco Catalyst Supervisor Engines

Could someone please explain the difference between the supervisor 1,2,3 engines that go with the Catalyst 5000 and 6500,why are they used and where would I use them ( Core , Distribution, Access). Another question - What would be the easiest way to test serial and ethernet ports on a router w

Protocol numbers

I see in the BSCN courseware they mention something about protocol number for example igrp=9 and RIP has a UDP port of 520. Does anyone know where I could get a list of the numbers for protocols. I have searched Cisco.com but could not find. Thanks _

Catalyst traceroute problem

Below is the show ver of the switch Cisco Internetwork Operating System Software IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEA SE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Fri 04-Feb-00 00:28 by lst

Medium enterprise design assistance

I am currently designing a new network for a medium size enterprise.Here are the details . 17 remote sites (8 users currently) 1 central site (HQ) Wan - ISDN from each site running to PSTN. From PSTN PRI is used to central site. For the remote sites I am using a 1720 with a isdn WIC. At HQ I wil

Explanation for VLSM

Are there any good links for VLSM or could someone give me a good explanation.The archives are unavailable. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself

CCDA questions

What percent of the exam is case studies ? Do they go into alot of techie info like admin distances ,FR config,ISDN stuff ? Were there any mind boggling questions that made you wonder whether you were writing the CCIE not the CCDA ? Thanks ___

Re: IDB

IDBs provide a central location in memory for storing information about network interface cards for use by the interface driver code. They are able to represent all knds of interfaces including subinterfaces.The IDB data stuctures also use alot of memory so Cisco has limited them to 300 per rou

Re: IP Classless

IP Classless is used for route summarization and for further subnetting a subnet for point-to-point WAN links using VLSM.It is important because by using ip classless u can perform route summarization thereby saving on bandwidth utilization,router processing and reduce the size of routing tabl

IPX Problem

This might seem silly but I am trying to enable ipx routing on my router and it just keeps telling unrecog command , even though I am in global config mode.When I do a ipx ? , i get unrecog command in global config mode.Same with apple IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEA

Router problem at remote node

I have a 1720 with serial wic on a remote branch.I cannot telnet nor ping the router even though the router on my side says that both the interface and line is up.The guy on the other side can see some routes not all.I have checked the config with him line by line so I know it is not the config

Router problem

I have a 1720 with a serial wic at a remote site. I see the interface on my side as up/up but I cannot telnet nor ping the remote site successfully. I have had the guy on the remote side check the config line by line and clear ip routes , and it does not show all the routes even though the 1720

BCMSN [7:3322]

I will be writing BCMSN this coming Friday and would like some pointers before I write on what I should more effort on. Thanks in Advance _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Messag

Help [7:3861]

I have a switch with a MSFC and it is giving me a routing error as follows: 1d02h: IP-EIGRP: Neighbor 172.16.155.1 not on common subnet for Vlan1 I have checked every thing I can think of but it all looks fine.I cannot see VLAN 155 due to this error ( ping or telnet ). Here is the contents of

Re: Help [7:3861]

Its fixed. Thanks >From: [EMAIL PROTECTED] >To: >Subject: Re: Help [7:3861] >Date: Wed, 09 May 2001 16:05:32 EDT > >Shane, >I found this link on the CCO. >It interprets the "not found on common subnets" error. >www.cisco.com/warp/public/103/15.html >HTH, >Rob H. >MCSE, CCNP, CCDP __

Static Routing [7:8896]

Hi I have 3 routers running a point-to-point network.There are 2 branches and the 3rd router is at the ISP.All the links are 64K and I am using static routes.I can telnet into and ping all 3 routers both serial and ethernet interfaces , but I cannot see the WINS and DNS servers at the ISP. I ha

ISDN Solution -help needed [7:33668]

I have a 1601 with BRI Wic and 3COM hub with 4 users.There is only 1 ISDN BRI.I need all four users to access the main office but use the ip pool on the main 3640. Any ideas Thanks _ Join the worlds largest e-mail service with

IDS 4210 help [7:35940]

I am currently setting up a IDS sensor 4210 and would like to know how to set up the command interface and the monitoring interface as I would like to manage it from my CSPM server. I need to get the command interface to talk to the switch but I don't know where to set an ip address for it so

IDS 4210 help again [7:36047]

I have setup the ids with the all the relevant in for such as the sensor and ids manager details as well as the ip address,netmask,default gateway. My question is that if 1 interface is the monitoring interface and it is connected to the internet router and the other is the command and control

Off topic: Syslog Server [7:36360]

I have a sun box with solaris 5.6 which I need to convert into a syslog server.I am very new to this and would like to know how to setup the ip address and the files so that it does logging.I would like to point some of my cisco routers to it. Thanks _

Bridging [7:15588]

I have 1 ethernet and 1 token ring interface on a 2600 ( Cisco 2612 ) router. We did not want to buy a fancy switch with a token-ring translational module etc so we bought the router instead. I do not want to route at all, ie the IP network must be the same on the Token and Ethernet sides. Can so

Bridging [7:15589]

I have 1 ethernet and 1 token ring interface on a 2600 ( Cisco 2612 ) router. We did not want to buy a fancy switch with a token-ring translational module etc so we bought the router instead. I do not want to route at all, ie the IP network must be the same on the Token and Ethernet sides. Can so

Cisco ACS [7:18084]

I would like to know how to setup an TACACS+ but use a windows NT user database not the ACS one ? Any ideas Thanx _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.group

IP Telephony study guide or cramsession [7:27130]

I will be writing the IP Telephony exam next week and would like to know whether any one has a study guide or cramsession that they could mail to me or point to some sites except cramsession.com as they don't have one. Thanks in advance _

IP Telephony Exam [7:27277]

I would like to know the pass mark for the Ip Telephony exam as I will be writing next week. Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/

CCIE Books [7:28383]

I am interested in buying the following books, would any one have recommendations for these. Thanks Troubleshooting IP Routing Protocols (CCIE Professional Development) ISBN: 1587050196 CCIE Practical Studies, Volume I ISBN: 1587200023 ==

CCNA Exam 640-407

Was there any questions on X.25 or Appletalk in the CCNA exam ?. What did they mostly concentrate on in the exam ?. Did they pull out any wild questions like what are ships-in-the-night ? Thanks Get Your Private, Free E-mail

EIGRP Network Design Solutions Book

Can anyone give some feedback as to whether this would be a good book to buy to futher my network design knowledge or could someone recommend a better book. EIGRP Network Design Solutions Author: Ivan Pepelnjak, CCIE SRP: $55.00 ISBN: 1578701651 Pages: 366 Pub Date: Oct 1999 Media: Web site Th

ISDN Solution -help needed

I want to connect users from a small business to the internet via a proxy server and cisco 1601 with IP Plus IOS . There will also be a remote user with an ISDN line and a Cisco 801 will be dialing into the company and another user that will be coming in via a modem. Both remote users will be n

Urgent advice needed on best ISDN Solution -help needed

I want to connect users from a small business to the internet via a proxy server and cisco 1601 with IP Plus IOS . There will also be a remote user with an ISDN line and a Cisco 801 will be dialing into the company and another user that will be coming in via a modem. Both remote users will be n

Linux Proxy server and 1700 using NAT

I have a cisco 1720 with 2xISDN WIC cards and a Linux Proxy Server with 2xNIC's. I need to know whether I can use 1 nic for the internal address and another for the global addresse's given by the ISP using only one ethernet port of the 1720. -Proxy--NI

Help - Cisco 1601

When ever I reboot the router I lose all my configs and the router enters initial config mode . I have wr mem all my configs before rebooting and I have checked everything .Please help Get Your Private, Free E-mail from MSN

CCNA Exams

After how long do we need to rewrite the CCNA exam , and if you have done a CCNP after that what happens to you CCNA ? Cisco is changing the course track 1st August . If I write the 640-407 now do I need to rewrite again for the new track ? __

Password recovery on 2503 (IOS 11.2 (16) )

Please help me with the password recovery for a 2503 (IOS 11.2 (16) ) Thanks Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://w

2 questions

(1) If I have an address of 172.37.2.56/12 how would I work out the IP range , broadcast address ,subnet mask ,subnet address.? (2) What are the different config reg settings and what would they do ? e.g 0x2102 or 0X0101 Thanks in advance ___

clear arp [7:63499]

Is there a command that I can use to clear the arp table of a specific VLAN on a Cat6500 with MSFC2?. thanks _ Who's your buddy? Win Vespa scooters for yourself and 5 of your buddies! http://www.sweepstakes2003.com/entry.aspx?

ISDN Question [7:66610]

If i do a show controllers bri 0 , how do I know if there is a cable connected to the port ? What do I have to look at to determine this ? I know that if you do it for serial interfaces you can see if the clocks have been detected. Any ideas Thanks

AUX Port dial in [7:69976]

I would like to configure the AUX port to allow for out of band management.I have a modem to connect to it.Should the router go down I could dial in from my PC and connect to the router to check for any problems. Does anyone have a sample config for this or documents. Thanks __

AUX Port dial in [7:69994]

I have a Windows PC and would like to telnet into a remote router via the AUX port using a modem on it.Does anyone have any sample configs for the router. PC--modem--->modem--Router (AUX Port) Thanks _ Wazup? Find out by j

Modem question [7:70392]

Is there a way to connect a modem to a serial or ethernet port for direct telnet to a remote router with a modem ?. I have a 2507 and 2522. Thanks _ Download MSN Messenger 5.0. http://messenger.msn.co.za/ It's free! Message Pos

AAA Problem [7:70448]

I have setup AAA on a router which has a primary serial line and a ISDN backup line.When the primary line goes down the back line does not authenticate locally at the HQ router.When I take AAA off then it works fine.If I modify the authentication for login to local then it deletes the first lin

Urgent: Async serial modem connection [7:71436]

I have a 2522 and a 1720.I want to setup the 2522 so that it will dial via a serial port using a modem that is attached.I have a DB60 to DB25 DTE cable for that.The router must dial the AUX port on the 1720 for use in out of band management.The 2522 does not want to dial out. Could someone plea

CCIE Beta RS [7:42907]

Could any one tell whether ISIS and packet formats are asked alot in the exam.I read that Catalyst 6x00/5x00 are asked.Is it hardware or CatOS/IOS questions ? Thanks _ MSN Photos is the easiest way to share and print your photos:

DHCP [7:45338]

I have a Cisco 1720 router with 2 x BRI modules and a cisco switch connected with a couple of PC's.These dial into a Cisco 3640 router.I want to setup DHCP.I have a DHCP server on the 3640 side with an address range.I looked for a sample config on Cisco.com but all I got was how to configure a

Dialback problem [7:45749]

I have a problem with isdn dialback in that when you dial in it cuts you off but you wait until the call cuts off.Analog dialback works fine on the same router. Here is a config ,maybe some one can see some thing I cannot: IOS (tm) 3600 Software (C3640-IS-M), Version 12.1(5)T6, RELEASE SOFTWA

CSPM for Cisco IDS [7:46206]

I would like to configure my CSPM to notify me via email when I get certain serverities.My CSPM and Exchange server are not on the same segment.All Cisco says is "If the SMTP server does not exist in a defined network within the NTT, a new network object must be created" How this should be don

Switch to 3Com hub [7:20517]

I have set a 2924 with a management address on vlan 1.We want to use a cross over to a 3com hub which runs into another 3com which runs into a router.There is a 2mb line between between the 2 buildings and the core sits at the second building. Will I be able to telnet into the switch ? Thanks

Setting up TACACs on catalyst switches [7:23944]

I have intstalled a couple of switches (6509,5500,4000,3548,2924)in my network a couple of months ago and would now like to add tacacs to the switches for AAA. Does anyone have any ideas with regards to the set commands and as well not letting me lock myself out of the switch. Thanks in advan

Dialer Threshold [7:24917]

I have a 128K leased line and would like to backup the link with ISDN.I would like to as well setup the ISDN so that if the leased line reaches a certain percentage of usage the ISDN kicks in and sorts of loads balance the line until it returns below the threshold. I have a 3640 with a PRI at t

IP Telephony Beta [7:57425]

Is there an IP Telephony beta exam due to come out in November ? _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.ph

Splitting an ethernet segment [7:61257]

Here is my current scenario- I have a 3640 RAS router at my HQ and 1x1700 routers at a remote site.I want to add another router to another remote site but use the same ethernet segment on DHCP.I have a Win2000 server doing DHCP for the 1 remote router. On the DHCP server I want to split the segm

OT : Routing Software [7:61668]

I am looking for free routing software (RIP,OSPF,ISIS,BGP,DVMRP) for a linux box.I would like to know as well where can I get X.21 serial cards and PCMCIA card slots for a PC as I would like to build a small network for practice. Any notes would be appreciated if anyone has done something like

ISDN Backup [7:50261]

I currently have 2 point to point links ruuning to the same place using eigrp as the routing protocol.I have added a isdn bri as backup but I don't want the isdn to kick in until both the point to point links drop. There is a serious routing issue with have 1 link up and the bri as the will lo

ISDN Help needed [7:51634]

I get the following error message as soon as I dial into the NAS.If I do a who on the NAS I can see that it gets connected but it disconnects as it cannot get authenticated. This my IOS on the NAS IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(8)T4, RELEASE SOFTWARE (fc1) 00:53:86758144308

RE: ISDN Help needed [7:51634]

. > >http://www.cisco.com/warp/public/779/smbiz/service/troubleshooting/ts_isdn.h >tm > >Cheers, > >Claudia > > > >-Original Message- >From: Shane Stockman [mailto:[EMAIL PROTECTED]] >Sent: 19 August 2002 12:29 >To: [EMAIL PROTECTED] >Subject: RE

Cisco ACS ver 2.6 [7:52065]

I am running Cisco ACS 2.6 and I have remote users dialing into our network via analog and digital.The ACS authenticates them using the domain database.I would like to know which users didnot dial into the network for the last 30 days and have their accounts disabled automatically so that they

Command [7:52157]

I am looking for some info on this command.I checked Cisco but did not find much.Anyone with a link ? session-disconnect-warning Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support

Voice solution - help required [7:53469]

I have 2 Siemens PABX's at 2 sites as well as a 256KB line between them.I would like to make the 256K line a tie line and run only voice on the link.I require 2 routers on both sides preferably 3640's. I am not so well versed with voice modules for the Cisco.Could someone please assist with a

Tacacs help required [7:71783]

1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication

Tacacs help required [7:71818]

1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication

Tacacs help required [7:71818]

1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication

Cisco ACS [7:73107]

Does anyone have a link as to where can I download an evaluation of Cisco ACS 3.2 on Cisco's website ? Thanks _ Rain coat or t-shirt? Find out with MSN Weather http://www.msn.co.za/weather/ Message Posted at: http://www.group