Re: IOS BUG??? [7:74804]

Can you post your configurations for this? What area is R5 in? Why are you skipping over R5 as the end of the virtual-link? -- Bill Lijewski CCIE #8642 Jens Petter Eikeland wrote in message news:[EMAIL PROTECTED] Hi group , I have been working on a backup solution with isdn and the

Re: Console port now working on 4000 [7:74489]

Does it display anything when you powercycle the router? Does it display the bootup information and then freeze? If it displays the bootup information and then freezes you may have accidentally put 'no exec' under the console port. You would need to break into the router, just like you would if

Re: eigrp help [7:73272]

Can you post your configs so we can see exactly what you are doing? Thanks, -- Bill Lijewski CCIE #8642 PPC-DAT Ep-Ng-Ist wrote in message news:[EMAIL PROTECTED] Hi all, I need some help on eigro redistribution.I redist eigrp from two AS into each other.I can see all the routes in one AS

Re: ISDN connect/disconnect issue [7:71845]

Usually when it goes up and down that fast its an authentication problem. Try the 'debug ppp authentication' command on your router and post the output. You should see 2 challenges, 2 responses, and 2 successes. If you don't see those then you have an issue with your usernames and/or passwords.

RE: rate-limit question [7:58423]

Well its actually a config at work that our ISP put on the router. It is: rate-limit 16000 8000 8000 conform-action set-prec-transmit 2 This is on our 256k link and we are having complaints that the line has performance issues. What I get out of this line is that anything in the 1st 24k or

RE: AW: Port Security on 3550 based on given MAC-Addre [7:58339]

Hello, The default for the maximum number of mac-addresses is one, and the default violation is shutdown. Bill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58490t=58339 -- FAQ, list archives, and subscription info:

RE: Help needed on ISDN PPP Multilink [7:58474]

Can you past the config from the other side also? That would help. Bill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58492t=58474 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

rate-limit question [7:58423]

For rate-limit, is there a default exceed-action ? I have been looking in the documents and all of the configs I seem to find all have the exceed-action drop, what I am wondering is what happens if I leave the exceed-action command off of the statement? Do the packets that don't conform still go

DLSW FST Encapsulation Compatability? [7:47209]

Can FST encapsulation handle both Token Ring hosts and Ethernet hosts? In the CCIE Practical Studies book there is a chart that sayd it only works with Token Ring hosts, yet a couple of pages before that it states that it will work with all types of Media? Thanks for the help Message Posted

2 interesting questions on DLSW + [7:43041]

I have two questions about DLSW + that I could use some explainations for. I would greatly appreciate any feedback you may have. 1) When you are doing DLSW Lite across the Frame Relay why is it necessary to map the LLC2 across the frame when you are not using passthrough? I can undertand it

2 interesting questions on DLSW + [7:43041]

I have two questions about DLSW + that I could use some explainations for. I would greatly appreciate any feedback you may have. 1) When you are doing DLSW Lite across the Frame Relay why is it necessary to map the LLC2 across the frame when you are not using passthrough? I can undertand it

2 questions I'm confused about [7:42739]

Hello all, I have 2 quick topics I could use some clarification on: 1) There is a new command for 12.2 called PPP MULTILINK LOAD-THRESHOLD What is the difference between this command and DIALER LOAD-THRESHOLD, and when would I use one over the other? 2) In OSPF you can advertise the

ISDN CHAP / PAP Authentication ? [7:41108]

I am confused about the debug output of a simple ISDN configuration. I have two routers R1 and R2 connecting with ISDN. R1 is using only PAP authentication, and R2 is using CHAP PAP. Now the debug is what is throwing me : 03:23:12: BR0 DDR: Dialing cause ip (s=180.1.113.1, d=180.1.113.3)

AS-Path Filtering in Confederations? [7:40249]

Can you filter out certain confederations (in the main AS) using AS-Path access-lists? I don't think that it's possible since they are technically in one big main AS. I have also tried it to no avail, but the thing that makes me think it may be able to be done is if I do a show bgp regexp ^$ it

Classful Prefix-list [7:39113]

Can someone tell me how to create a Prefix-list to only alow classful routes for BGP. I know you can do the following with an extended access-list: access-list 100 permit ip 0.0.0.0 127.0.0.0 host 255.0.0.0 access-list 100 permit ip 128.0.0.0 63.255.0.0 host 255.255.0.0 access-list 100 permit

CCIE #8642 [7:32411]

First I would like to thank everyone here who has answered my questions, and everyone who posts here. This is an invaluable source of information. I took my lab exam on Tuesday in San Jose, it was my first attempt and I was very nervous. I didn't think that I did well enough to pass and had a

RE: CCIE #8642 [7:32411]

For those who asked what kind of experience I had and how I prepared, here is a quick run down. I started working on my CCNA in March of 2001, I hadn't touched a router before that. I finished my CCNA in April, finished my CCNP in July, and then took my written on September 9th. From September

Number Expansion Question. [7:31238]

I am working on a lab at school and I'm stuck. They want us to be able to press any number to dial the full number 312223 I know that if you put just a . such as: num-exp . 312223 This will let you press ANY KEY, # and * included. Is there any easy way to make it just 0-9 without

Confusion on permiting SNA [7:30886]

Could someone please tell me the correct way to permit just SNA. I have read many places that the correct access list to permit just SNA is : access-list 200 permit 0x 0x0D0D I just received the Cisco Practical Studies book and it shows it as follows: access-list 200 permit 0x0D0D 0x

DLSW+ Priority Command, help please. [7:29665]

Hello, I'm working on getting a good understanding of DLSW+, but I'm having trouble finding good information on this one subject: Using Priority with DLSW+. I know the TCP ports 2065, 1981, 1982, 1983, and I know you can use them to do queueing with, but I don't understand exactly how to set

Redistribution and Filtering [7:28699]

I have a basic question, kind of... When you redistribute between routing protocols, should you ALWAYS use a route-map? If there are no loops is it still recommended/required? I have been doing it but I want to know if its overkill. Thanks, Bill Message Posted at:

VoATM SVC [7:25195]

Is it possible to run VoATM over an SVC? I am running 12.1(3a)T1. TIA, Bill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=25195t=25195 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Help with Voice over IP over ATM [7:25163]

I have been looking for what is probably a one line command for about 2 days now. In the lab I am working on you are to do Voice over IP over ATM SVC's. They want it so if no one is talking it still sends empty voice packets. Right now if no one is talking you can hear it go dead silent until

IP Sec on CCIE RS LAB?? [7:24122]

I have heard that they have some IP Security on the CCIE Routing and Switching Lab. Does anyone know if this is true or not? It dosen't show it listed on the Cisco web site, but I'd like to know for sure. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24122t=24122

Upgrading IOS image on 2500 series routers. [7:23713]

Hello, I am looking for a good guide/tutitorial on how to upgrade the IOS image from one 2500 series router to another. I thought I read somewhere that you could do this with just the two routers hooked together but I don't know if that is true or not. Any good links or help is greatly

RE: Fw: RIF over DLSW question? [7:17894]

I could write a couple pages on this, but try and give you a quick run down. I would suggest that you do some more reading on the subject though. EXAMPLE TOPOLOGY: Host1--Ring8---Bridge1---Serial Link-Bridge2Ring9Host2 RSRB is passthrough for the RIF, in order for it to work, you