Hi. My switch is only menu driven, with the enterprise sware. I wanted
to know if I can get or how I can get the CLI to work on it. Also, I
have 2 1924's and wanted to cascade them with either fiber or cross over
cable. Any special configuration needed? Thanks again!
---
Hi--I cant hyperterminal into my new 1900 series
switch! I changed the baud rate to 9600, and left all
the same, but still no dice! Also, I changed the flow
control to hware, to none...and I cant get on.
Also,Im using nt ws, as well as windows 98. Same
error every time--weird characters across
Hi. WOuld someone please explain to me why in the WORLD do I not need
to have one router configured as a frame relay switch if I have two routers
piggybacked, and both have built in csu/dsu's? That makes no sense to me!
If I have two routers back to back with the serial cables, fine. I
Hi. Im having some problems understanding frame relay, and would benefit
from some good tips! Below are some of the questions I have.
1. Is there a way to allow frames enter your network from 2 routers, so you
can analyze the packets? (This is in a back to back configuration only)
2. T
Hi again. I know the commands to transfer my flash to
the tftp server (as in Lammle's book) BUT it did not
work on my router. I got as far as where we ought to
see "" And it said: "Copy aborted.
Tftp Timeout."
I did install tftp on my pc, and gave it an ip
address, but never
Hi. I have a 2514 router, 2 hubs, and 2 other
routers (1602 and 2502). The 2514 has 2 serial
interfaces, and 2 ethernet interfaces.
Basically, I have two questions:
1. You know how if you are not on the same subnet you
cannot even ping the router? How come you can telnet
from home into r
Hi. Im practicing at home, and am encountering the
following problem:
I have one 2502 router, has 1 t.ring port and 2 serial
ports
Also, have one 2513 with 2 aui ports, 2 serial ports.
Now, Both of these guys are connected via serial port.
serial0 on the 2513 is going to serial1 on the 2502.
Hi. I have two questions:
1. Does anyone know where on the web we can have some
free access to switches so that we may telnet into
them? FirewallKing.com has only router access as far
as I could tell.
2. At work, We are running an IBM 2210 router, with
two hubs (ethernet 10bt) and one HP s
Hi. Was wondering what interface i could or would put
ospf on, for testing in a home lab environment! Such
as, can I run ospf from eth0 to serial1 with 2
different routers, both on same network? Anyone know
if it is limited to serial interfaces?
Thanks!
___
Hi! I am having some difficulty in setting up my lab
at home, and need some good advice. I have two pc's,
2 routers, and one switch. I just want to work on the
routers for now, though. Just established a network
with them, and can telnet into the router. I have a
2514 router with 2 serial and
Hi. I am having problems understanding a simple routing table. For
example, consider the following:
172.16.0.0/16 is subnetted, 2 subnets
I 172.16.8.0 (etc)
What the heck is the 172.16.0.0 mean? Is that the final destination network
where the pdu is going? And how about the 2 subnets
Hi. Accd. to the BSCN text, OSPF maintains three tables (r. table, link
state, and neighbor). Is there a way to view the link state or neighbor
table, for that matter?
_
Get your FREE download of MSN Explorer at http://explorer.m
12 matches
Mail list logo