hi guys,
this is the output of my sh frame-relay pvc
DLCI = 171, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0.171
input pkts 1435560 output pkts 9358712 in bytes 370699089
out bytes 1069864391 dropped pkts 0 in pkts dropped 0
out pkts dropped 0
hi all,
we have one frame relay link to customer with the following connection
router -csu/dsu(lease line)frame relay node/cloud
the problem is on serial0/0(connected to csu/dsu) the input errors and
interface reset is increasing tremendously, ping test resulted in 6 packets
dropped
hi all,
I got one scenario, where we got 2 routers, one is A and another is HQ,
connection between A & HQ are via Frame Relay and ISDN as a backup.
ISDN is using loopback address 202.x.y.z.
Question:
when both Frame Relay and ISDN are up,
how do I create access list in router A to deny ping to 2
Is there a way to know/test/monitor that ISDN backup is always ready to be
used when the primary link is down..? I sometimes frusrated that the ISDN
won't kick up when the primary link is down, and then only the ISP claim the
ISDN link got problem...
thanks
- Original Message -
From: "Pete
Hi guys,
need help to explain the output from 'sh int' below
1) what is 'underruns' and 'deferred' means..?
2)Is 'underruns' and 'deferred' indicate a router problem or a LAN problem..?
CustomerHQ1>sh int faste0/0
FastEthernet0/0 is up, line protocol is up
Hardware is i82543 (Livengood), addres
hi all,
after i unshut the serial interface for frame relay service, the status was
up, up...but after a while(maybe 10 secs), it went back to up,down...and the
status up,up didn't represent the PVC is up because the Service Provider
always claim that their LMI status remained down during that
per
hi all,
i'm wondering is there a way we can manage an end-to-end connection on ATM
as what we have with LMI in FrameRelayTQ
rgds
nazri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51693&t=51693
--
FAQ, list archives, and
hi all,
i can't ping to any host in the LAN although the fa0/0 shows up,up. sh int
fa0/0 described that there was a tremendous amount of interface reset, and
input rate is 0 what does it mean..? i did a shut/no shut on the the
interface fa0/0, then only i can ping to all LAN hosts...anybody pls
e
MAIL PROTECTED];
Sat,
> 09 Feb 2002 10:58:11 +0800 (SGT)
> Received: (from s12132 [200.34.5.124]) by webbuster.telekom.com.my
> (NAVGW 2.5.1.13) with SMTP id M2002020911084601299 for
;
> Sat, 09 Feb 2002 11:08:46 +0800
> Date: Sat, 09 Feb 2002 10:58:33 +0800
> From: Md Nazri
hi all,
i really need to know the ip address of all active host in LAN side. how do
i achive this from router ? i tried using broadcast ping, ping x.x.x.255
(x.x.x=LAN ip) but it doesn't work...any xtra config i've to add in ...pls
help
TQ
rgds
nazri
Message Posted at:
http://www.groupstudy
hi all,
we've monitored a slow frame-relay link to find out what causing that. we
found that 3% out of total frames transmitted are shorter than 64 byte(4~63
byte) and 0.1% are larger than 1024bytes. can anybody pls explain what this
result indicates...does it contribute to the slowness of the li
i did sh buffer in a router and the o/p as below...anybody pls xplain what
does it mean.?
tq
nazri
Private particle pools:
1/0 buffers, 512 bytes (total 768, permanent 768):
0 in free list (0 min, 768 max allowed)
768 hits, 0 fallbacks
768 max cache size, 512 in cache
10 buf
hi all,
i need to access a remote router via AUX port. Anybody pls clarify what i
should configure in my 2500 router and in my pc..
tq
nazri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20364&t=20364
--
FAQ, list archives, a
hi all,
how do i delete the sub-interface..? i tried using 'no sub#', but when i do
'sh ip int brie' it still give the sub# with status deleted...any help
appreciated
TQ
nazri
telekom malaysia
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18346&t=18346
---
Maybe try adding:
boot system flash file.bin
to the config file.
Just a shot.
Maybe someone else may have a better anwser
- mike dye -- Open Domain Service - www.ods.org -
On Wed, 22 Aug 2001, Sean Knox wrote:
> Hello all,
>
> I recently erased a flash card and reloaded an IOS image o
Thanks Ken,
Infact I wanted to know the no.,of questions and time allowed to calculate
how much time i can take for each question, Its nothing wrong in asking
right??? anyhow you have given the calculations...thanks once again.
fahim
CCNA, CCDA
Message Posted at:
http://www.groupstudy.com/form/
Hi!
What is the passing score for 640-504 (switching exam) and how many
questions are there totally.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8122&t=8122
--
FAQ, list archives, and subscription info: http://www.groupstudy.
Run HSRP on both routers, which will create a single virtual router
> that is maintained even if one of the routers fails. Your server will
> maintain connectivity to available sites even if one of the routers fails.
>
> Good luck, search Cisco.com for HSRP
>
> Ejay Hire
>
>
&g
> hi all,
> i got 2 routers sharing the same ethernet...both ether should active at
the
> same time(so i think hsrp not meaningful) with each ether have different
ip
> address with same subnet. Server on LAN should point to one particular
> ip(can it be two..?)...how do i achieve that...?? pls he
hi all,
i got 2 routers sharing the same ethernet...both ether should active at the
same time(so i think hsrp not meaningful) with each ether have different ip
address with same subnet. Server on LAN should point to one particular
ip(can it be two..?)...how do i achieve that...?? pls help
tq
indication that the interface passed a hardware check.
>
> Priscilla
>
> At 08:21 PM 4/25/01, md. nazri wrote:
> >thanks for the answer...
> >i understand that LP will down if no connection attach, but why FE still
up,
> >does it up forever until we shut it down? Does it appl
no physical connection. You have to enable the
> interface, of courese.
>
> Hope this help
> Vincent Chong
>
>
>
> ""md. nazri"" hi all,
> > got one question regarding FastEthernet on Cisco 2620..
> > why the status showed FastEthernet is up
hi all,
got one question regarding FastEthernet on Cisco 2620..
why the status showed FastEthernet is up, Line protocol down although the
cable was pulled out from the port...in what cases the port will down..any
help appreciated
tq
Message Posted at:
http://www.groupstudy.com/form/read.php?f
Hello all,
has anyone ever encountered this problem?
Whenever I connect to the console port of my catalyst 1900 switch, a
dial string is displayed that says ATQ0Z or ATQ0Z0. Apparently, the
previous owner had a modem attached to the port. Any suggestions would
be greatly appreciated.
thanks
Hello all,
has anyone ever encountered this problem?
Whenever I connect to the console port of my catalyst 1900 switch, a
dial string is displayed that says ATQ0Z or ATQ0Z0. Apparently, the
previous owner had a modem attached to the port. Any suggestions would
be greatly appreciated.
thanks
hi all,
i need some help on this,
2 routers connected over frame relay, named RouterA and RouterB. RouterA ethernet has
2 ip address, X(x,.x.x.x) as primary and Y(y.y.y.y) as secondary. RouterB ethernet
also has 2 ip address, W(w.w.w.w) and Z(z.z.z.z). X supposed to communicate only with
W a
hi all,
I got a problem with my 2500 router, anybody pls
xplain what the (boot) means..i can't even
show my routing table...i copied sh ver o/p...
KB(boot)>sh verCisco Internetwork Operating System
Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWAR
hi all,While doing troubleshooting on 3810
router, I got this output when issue sh proc cpu
command:
BKRB027RT120#sh proc cpuCPU utilization for five seconds: 99%/23%; one minute: 99%; five
minutes: 99% PID Runtime(ms) Invoked
uSecs 5Sec 1Min 5Min TTY
Process 1 38279
10
hi all,While doing troubleshooting on 3810 router, I got
this output when issue sh proc cpu command:
BKRB027RT120#sh proc cpuCPU utilization for five seconds: 99%/23%; one minute: 99%; five
minutes: 99% PID Runtime(ms) Invoked
uSecs 5Sec 1Min 5Min TTY
Process 1 38279
29 matches
Mail list logo