If I have this simple net:
3660(FR Switch)---3640
I am using NM-4T on both routers.
Default (HDLC) encapsulation causes both router serial interfaces to
come up. I am trying inverse ARP from Caslow book but as
soon as I enable FR (or even PPP) encap, line goes down. 3660 is the D
Did you put frame-relay intf-type on the frame-interface?
Chris
""PING"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If I have this simple net:
>
> 3660(FR Switch)---3640
>
> I am using NM-4T on both routers.
> Default (HDLC) encapsulation causes both router
to
back, take a look at this link:
http://www.cisco.com/warp/public/125/frbacktoback_hybrid.html
Guy
-Original Message-
From: PING
To: [EMAIL PROTECTED]
Sent: 4/11/2002 9:49 PM
Subject: Frame-Relay Problem [7:41250]
If I have this simple net:
3660(FR Switch)---3640
I am
Ping,
Have you configure the following comands on FR switch ?
1. Global config mode : "frame-relay switching"
2. Interface config mode: "frame-relay intf-type dce"
- Original Message -
From: "PING"
To:
Sent: Friday, April 12, 2002 10:49 AM
Subject
Yes. It works from 3660 to 3800. Doesn't work from
NM-4T to NM-4T.
/N
Chris Camplejohn wrote:
> Did you put frame-relay intf-type on the frame-interface?
>
> Chris
>
> ""PING"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > If I have this simple net:
> >
> > 3660(FR Switch
FR switch ?
> 1. Global config mode : "frame-relay switching"
> 2. Interface config mode: "frame-relay intf-type dce"
>
> - Original Message -
> From: "PING"
> To:
> Sent: Friday, April 12, 2002 10:49 AM
> Subject: Frame-R
TECTED]]On Behalf Of
PING
Sent: Thursday, April 11, 2002 7:43 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay Problem [7:41250]
The question is that Caslow says on page-110 that if FR switching is
on, just enabling the encapsulation will bring up the PVC by using
inverse arp. I don't see
hat happening.
>
> /N
>
> "Engelhard M. Labiro" wrote:
>
> > Ping,
> >
> > Have you configure the following comands on FR switch ?
> > 1. Global config mode : "frame-relay switching"
> > 2. Interface config mode: "frame-relay intf-type
Sean brings up a good point to check the maximum clock rate of your module.
I've seen more than 1 person try to use the A/S module for 1.544Mbps
However, the A/S module that he refers to supports a max of 115.2Kbps in
async mode and when put into sync mode supports a max of 128Kbps. This
mod
9 matches
Mail list logo