.)
On the No Shut command, I'd use it last on each interface
you
configure.
-Mark
-Original Message-
From: Monu Sekhon [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 20, 2003 7:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay issue [7:63446
, February 20, 2003 7:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay issue [7:63446]
Hi Larry/John,
I forgot to mention no shut in the above confif while
writing
here,
Its still there and connection does not come out
See I mentioned that while giving command by command
it last on each interface you
configure.
-Mark
-Original Message-
From: Monu Sekhon [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 20, 2003 7:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay issue [7:63446]
Hi Larry/John,
I forgot to mention no shut in the above confif
it last on each interface you
configure.
-Mark
-Original Message-
From: Monu Sekhon [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 20, 2003 7:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay issue [7:63446]
Hi Larry/John,
I forgot to mention no shut
Hi All
Hey I am facing a strange problem in frame-relay
My config
--
my initial config
int serial 0
(nothing confgured initially)
Then I cut paste this config and my link does not come up means Interface
does not come up.
interface Serial0
shut (if i give here no shut then link comes
I would check your settings such as the LMI type, Have you done any other
fault finding yet ? Such as sh frame relay pvc ?
Once you hit no shutdown, the interface becomes live in a way of speaking.
Here is an example of one of my configs.
interface Serial0/0
no ip address
encapsulation
enter the no shut command into your cut and paste script for
the Int Ser0 and it will
come up..all interfaces in a router are always defaulted to
shutdown..In your case the
Main interface needs to be no shut in order for the logical
interface to work...
--
Larry Letterman
Network Engineer
Cisco
Hi Larry/John,
I forgot to mention no shut in the above confif while writing here,
Its still there and connection does not come out
See I mentioned that while giving command by command manually connection
comes out.
It seems to me that while the interface is down during that frame-relay LMIs
think
PROTECTED]
Subject: Re: Frame-Relay issue [7:63446]
Hi Larry/John,
I forgot to mention no shut in the above confif while writing here,
Its still there and connection does not come out
See I mentioned that while giving command by command manually connection
comes out.
It seems to me that while
9 matches
Mail list logo