( 8flash/32dram) tomorrow
just for the hell of it,and see whetherthat image has it (almost
guaranteed). I will post the results.
- Original Message -
From:
Jared Carter
To: [EMAIL PROTECTED]
Sent: Saturday, September 02, 2000 9:28
AM
Subject: ISL on sub
I faced the same problem
few weeks ago also. But I solved the problem using this
IOS:c2600-is-mz.120-5.T1.bin
"Jared Carter" [EMAIL PROTECTED] wrote in message 007601c014fa$da377160$[EMAIL PROTECTED]">news:007601c014fa$da377160$[EMAIL PROTECTED]...
Group-
I have 2 2924 and a 2620 I
On Tue, 5 Sep 2000, whatshakin wrote, in one ridiculously long line:
I just tried 12.0.3T3 Enterprise Plus and 12.0.4T IP Plus on a 2621
and neither version has an encapsulation command available under the
interface config mode.
Did you create a sub-interface and try it there? It works
: [EMAIL PROTECTED]
Sent: Tuesday, September 05, 2000 12:55 AM
Subject: Re: ISL on sub-if
On Tue, 5 Sep 2000, whatshakin wrote, in one ridiculously long line:
I just tried 12.0.3T3 Enterprise Plus and 12.0.4T IP Plus on a 2621
and neither version has an encapsulation command available under
PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, September 05, 2000 12:55 AM
Subject: Re: ISL on sub-if
On Tue, 5 Sep 2000, whatshakin wrote, in one ridiculously long line:
I just tried 12.0.3T3 Enterprise Plus and 12.0.4T IP Plus on a 2621
and neither version has an encapsulation
Ends up the Plus was the culprit. Things are
working great now... its amazing how well things work when you have the right
tools :)
Thanks for all the help
/Jared
On Tue, 5 Sep 2000, whatshakin wrote, in one ridiculously long line:
I just tried 12.0.3T3 Enterprise Plus and 12.0.4T IP Plus
Group-
I have 2 2924 and a 2620 I am trying to practice
routing between VLANs. The trunk between the switches is okay. When
I create the sub-if on the router and try to run encap isl 2, it barks at me
that this is an unrecognized command... ie "encapsulation" is not a valid
command. I am
Hi
Make sure you specify the encapsulation before the
IP address.
HTH-- John Hardman, CCNP
MCSE+I
""Jared Carter"" [EMAIL PROTECTED] wrote in message 007601c014fa$da377160$[EMAIL PROTECTED]">news:007601c014fa$da377160$[EMAIL PROTECTED]...
Group-
I have 2 2924 and a 2620 I am
On Sat, 2 Sep 2000, John Hardman wrote:
Make sure you specify the encapsulation before the IP address.
You also must be running a "Plus" IOS image. ISL only works with Fast
and Gig Ethernet ports, not standard Ethernet.
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
Hi
Correct, I had forgot about the Plus image. But the 2620 is a FE router...
--
John Hardman, CCNP MCSE+I
"Jay Hennigan" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
On Sat, 2 Sep 2000, John Hardman wrote:
Make sure you specify the encapsulation before
Is there a difference between '10BaseT/100BaseT' Fastethernet port (which is
the Fastethernet port on 2621) vs a '100BaseT' fastethernet port ?
The Fastethernet port supported by 4500 router is a '100BaseT' port.
"John Hardman" wrote in message 8ormfb$d23$[EMAIL PROTECTED]...
Hi
Correct, I
ot; [EMAIL PROTECTED]
To: "Jared Carter" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, September 02, 2000 2:47 PM
Subject: Re: ISL on sub-if
On Sat, 2 Sep 2000, Jared Carter wrote:
Group-
I have 2 2924 and a 2620 I am trying to practice routing between
VLANs.
In a message dated 9/2/00 4:54:00 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Is there a difference between '10BaseT/100BaseT' Fastethernet port (which
is
the Fastethernet port on 2621) vs a '100BaseT' fastethernet port ?
10/100 baseT can be configured as either of the 2 speeds,
port do the same ?
I should have asked the question differently.
Alex
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Saturday, September 02, 2000 5:33 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ISL on sub-if
In a message dated 9/2/00 4:54:00 PM
, September 02, 2000 2:23 PM
Subject: Re: ISL on sub-if
Well, the "Plus" version seems to be what is lacking. Is there any way to
reference the image name to what feature set it is? I searched on CCO
with
the image name and of course found several hundred documents. Thanks,
again
12:51 PMTo: [EMAIL PROTECTED]Subject: Re: ISL
on sub-if
Hi
Make sure you specify the encapsulation before
the IP address.
HTH-- John Hardman, CCNP
MCSE+I
""Jared Carter"" [EMAIL PROTECTED] wrote in message 007601c014fa$da377160$[EMAIL PROTECTE
16 matches
Mail list logo