Show us your configs.
- Original Message -
From: Shane Stockman <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 7:09 AM
Subject: Router problem
> I have a 1720 with a serial wic at a remote site. I see the interface on
my
> side as up/up but I cannot telnet nor
On Tue, Mar 27, 2001 at 07:09:06AM +, Shane Stockman wrote:
> I have a 1720 with a serial wic at a remote site. I see the interface on my
> side as up/up but I cannot telnet nor ping the remote site successfully. I
> have had the guy on the remote side check the config line by line and clear
- Original Message -
From: Groupstudy
To: [EMAIL PROTECTED]
Sent: Tuesday, March 27, 2001 2:53 AM
Subject: Re: Router problem
> Show us your configs.
Hey now, this isn't Mardi Gras... ;-)
_
FAQ, list archives, and subscription in
>- Original Message -
>From: Groupstudy
>To: [EMAIL PROTECTED]
>Sent: Tuesday, March 27, 2001 2:53 AM
>Subject: Re: Router problem
>
>
>> Show us your configs.
>
>Hey now, this isn't Mardi Gras... ;-)
Do you get beads with SmartNet?
__
AM
To: [EMAIL PROTECTED]
Subject: Re: Router problem
>- Original Message -
>From: Groupstudy
>To: [EMAIL PROTECTED]
>Sent: Tuesday, March 27, 2001 2:53 AM
>Subject: Re: Router problem
>
>
>> Show us your configs.
>
>Hey now, this isn't Mardi Gras..
>From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
>Sent: Tuesday, March 27, 2001 7:29 AM
>To: [EMAIL PROTECTED]
>Subject: Re: Router problem
>
>
>>- Original Message -
>>From: Groupstudy
>>To: [EMAIL PROTECTED]
>>Sent: Tuesday, March 27,
Hmmm, I think there may be an issue in OSPF (that is if your running that
protocol). Check to see what state OSPF is in on the head end. The link may
be flapping and your just not catching it when it's down. Call the telco
also and tell them of your issues. Hope I help any...
- Make sure you have the correct LMI type at both end (might want to check
with ISP what they lmi type they use on their frame switch).
- Check for the Keepalive
- Check the channel setting on the csu/dsu and verify to configure it
right...
""Shane Stockman"" <[EMAIL PROTECTED]> wrote in messag
Thank you all for your replies. I have solved the problem, apparently these
MAU's are not capable of 16mb speeds. I chaned the speed on the token ring
cards and the routers to 4mb and everything is working great.
I don't need 16mb anyway because this is a non production lab.
Thank you all fo
Have you checked the ring speed?
CM
- Original Message -
From: "Joseph Slawinski"
To:
Sent: Saturday, January 26, 2002 8:26 PM
Subject: Router problem inserting into token ring [7:33304]
> I am having a problem I know most of you folks could help me with. I have
> two 2502 routers an
Is the ring completed on the MAU, IE do you have a patch lead in the RI & RO
to complete the ring?
I had a similar issue using a MAU which had a similar description as yours,
I sused it finally...used one patch lead in RI & RO...Bingo it all works.
As Charlles said make sure there both either 4
I have checked the ring speed, its the same on the token ring cards and the
router. The hub doesn't have a setting for ring speed though.
Author: Charles Manafa (---.blueyonder.co.uk)
Date: 01-26-02 17:26
Have you checked the ring speed?
CM
- Original Message -
From: "Joseph Slawi
n't resist)
- Original Message -
From: "Charles Manafa"
To:
Sent: Saturday, January 26, 2002 5:26 PM
Subject: Re: Router problem inserting into token ring [7:33304]
> Have you checked the ring speed?
>
> CM
> - Original Message -
> From: "Joseph Slawinsk
The MAU's speed cannot be changed, so I am guessing this is controlled
between the token ring cards and the router, (they have to negotiate
together). The 15 second blinking of the port light on the MAU is only when
one PC is attached. I used this as an indicator to prove that the ports
were wor
Try the troubleshooting techniques from Cisco ->
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/index.htm
select Token-Ring and follow the instructions!
If that doesn't give you any luck then turn on debug and check the status
of the interface...
Also if you have CCO then dump the Tec
Are you running 4Mb or 16? Make sure all speeds are all the same.
Are you plugging the routers into Ring-In or Ring-Out? (That's a no-no)
You say the lights light up every 15 seconds. Does this mean they are only
on for a few seconds?
>>> "Joseph Slawinski" 01/26/02 02:26PM >>>
I am having a
It is possible that the MAUs are defective. Substitution is a good
troubleshooting step. Do you know anyone who does have TR working? If so,
substitute your MAU for theirs and see if it works for them. Try their MAU
with your routers.
> -Original Message-
> From: Joseph Slawinski [mailto:
etron
trix with 24 ports. I think those things are available on e-bay for around
$20.00.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Daniel Cotts
Sent: Saturday, January 26, 2002 6:01 PM
To: [EMAIL PROTECTED]
Subject: RE: Router problem inserting into
I connected to a mau at work and it was 16mb. Have you solved the problem
yet?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
adam lee
Sent: Sunday, January 27, 2002 12:54 AM
To: [EMAIL PROTECTED]
Subject: RE: Router problem inserting into token ring
19 matches
Mail list logo