Re: debug ip error

2001-04-07 Thread J Roysdon
Also, assign an IP to the RSM and set the logging to the console as disabled. Then telnet to the RSM IP and turn on terminal monitor. This way you hammer your IP session and not the console session, and should be able to either get in with another telnet session or worst case via the session com

Re: debug ip error

2001-04-03 Thread EA LOUIE
"Howard C. Berkowitz" <[EMAIL PROTECTED]> wrote: > Ah, but it was even worse in the Old Days of wooden ships, steel men, > and xGS routers. Each telnet session on an MGS router took up about > 20% of the CPU, at least around release 9.0. That was the show > process overhead of just being log

Re: debug ip error

2001-04-03 Thread Howard C. Berkowitz
>or it's undeb all (used to be even easier, in "the good ole days", u >al worked) > >if that was a production router, then you need to be severely warned >about using the debug commands (especially the packet-trapping >commands) on a production machine. Just the volume of ASCII >spewing onto

Re: debug ip error

2001-04-03 Thread EA Louie
or it's undeb all (used to be even easier, in "the good ole days", u al worked) if that was a production router, then you need to be severely warned about using the debug commands (especially the packet-trapping commands) on a production machine. Just the volume of ASCII spewing onto the cons

Re: debug ip error

2001-04-03 Thread garrett allen
one tip is to issue the no debug all command prior to issuing debug all. that way when the router display begins spewing debug info you can issue an up arrow and enter command sequence to get out of debug mode. Gayathri wrote: > Hi Group, > > Recently due to some problems my colleague issued a

RE: debug ip error

2001-04-02 Thread Muhammad_Abduh
have yout tried command 'no debug all' ma -Original Message- From: gayathri [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 03, 2001 12:01 PM To: cisco [EMAIL PROTECTED] Cc: gayathri [EMAIL PROTECTED] Subject: debug ip error Hi Group, Recently due to some problems m

RE: debug ip error

2001-04-02 Thread Vivek Singh
doesn't even undebug all works -Original Message- From: Gayathri [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 03, 2001 10:31 AM To: [EMAIL PROTECTED] Subject: debug ip error Hi Group, Recently due to some problems my colleague issued a debug ip error command on the rsm. The