On May 30, 7:10am, "Hire, Ejay" wrote:
}
} Back to the off topic subject of Liquid cooled CPU's, most desings I've
seen
} use mineral oil. A fault with this design is that "bubbles" of moisture
can
} settle out and sink onto the Board/cpu.
The other thing I was wondering is wouldn't the mi
refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:43 PM
refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:43 PM
refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:43 PM
refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:43 PM
refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:43 PM
Flourinert - (Pronounced Floor-in-ert) is pretty neat stuff. You can put
your tv in a tank of the stuff and keep on watching. also, if you've got a
intermittent solder joint, plug it in and dunk it in florinert. You'll see
a thin stream of bubbles rising from the fault. First time I saw it was
My first job in networking, or should I say connecting Sun 350's to
thicknet ethernet vampire taps until they let me get my newbie hands on
those brand new Cisco thingies, was at Cray Research. The Cray2 circuit
boards were immersed in florinert (sp?) to keep them cool. Ran about
$400 a gallon a
> refrigerator compressor to below freezing. The entire motherboard was
> > submerged & benchmarks went way up...rofl.
> >
> > Allen
> > ----- Original Message -
> > From: "Jarmoc, Jeff"
> > To:
> > Sent: Thursday, January 03, 2002 3:
I was wondering if someone would respond that way! ;-) We did this a while
ago before corporate Starbucks decided to roll out their "approved" method.
I think it was over a year ago that we put it in.
We use the Apple Airport. We didn't use any antennae beyond the antenna
inside the Airport. W
really? we did a roll out to starbucks nationwide through mobilestar using
ap340's and some nokia and 2621 routers. We never saw these issues. Was
this a private contract you did with them? And where did you place the
antenneas?
Patrick Ramsey
Sr. Network Engineer
WellStar Health Systems
77
On a slightly more serious note, I installed 802.11 at our local Starbucks
and the signal quality if pretty bad. We finally realized that it was being
affected by all the jugs of coffee and other liquids and by the "big bags
of mostly water" (humans). (Some StarTrek creature referred to humans
If there is a significant interest in this, let me know. I can make the
"lens" part on my lathe.
-ejh
-Original Message-
From: Jarmoc, Jeff [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 03, 2002 4:43 PM
To: [EMAIL PROTECTED]
Subject: RE: wireless max distance questio
Jim,
It really depends on what kind of antenna and what's in between (you'll need
to calculate your fresnel zone). If you have a clear line of site, you
should be fine with a good antenna. If you have some trees or whatnot, you
might need a 1W amp. Ive been doing a lot of research on wireless
Priscilla,
Didn't you see where it says you're suppose to eat the chips first and use
the *empty* can?
I don't think you considered what would happen to the signal when
moisture/mold/mildew set in. You'd have a soggy pile of "living" stuff,
which would probably really mess up the signal propert
was
> submerged & benchmarks went way up...rofl.
>
> Allen
> - Original Message -
> From: "Jarmoc, Jeff"
> To:
> Sent: Thursday, January 03, 2002 3:43 PM
> Subject: RE: wireless max distance question [7:30822]
>
>
> > There's also the good ol
Thursday, January 03, 2002 2:17 PM
>To: [EMAIL PROTECTED]
>Subject: Re: wireless max distance question [7:30822]
>
>
>I've heard of a Cisco antenna boosters. Check the qprg. or
>http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/airoa_ds.htm
>
>Some directional a
went way up...rofl.
Allen
- Original Message -
From: "Jarmoc, Jeff"
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
> There's also the good ol' 802.11b pringles can hack. I haven't tried it,
> and it
Jeff Jarmoc - CCSA, CCNA, MCSE
Network Analyst - Grubb & Ellis
[EMAIL PROTECTED]
-Original Message-
From: Steven A. Ridder [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 03, 2002 2:17 PM
To: [EMAIL PROTECTED]
Subject: Re: wireless max distance question [7:30822]
I've heard
I've heard of a Cisco antenna boosters. Check the qprg. or
http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/airoa_ds.htm
Some directional antennas can get up to 25 miles. You may need a line of
sight though. Check with Cisco
FYI, Linksys wireless access points can be hacked via fir
20 matches
Mail list logo