I have TWO routers with TR interface - 2502/2504. I am using IBM MAU.
Connected both the routers TR int to MAU port 1 2. Router 2504 TR Int is
up and running fine. I am having problem with 2502. There is no fault on
MAU. What else could be the problem? I even changed ring speed on 2502.
1. Swap the cables between the 2502 and 2504 (if you haven't already)
2. Swap the ports on the MAU.
If 1 and 2 do not work get rid of the 2502.
Even Cisco's hardware breaks.
HTH
DaveC
RamG wrote:
I have TWO routers with TR interface - 2502/2504. I am using IBM MAU.
Connected both the
what
these are called? magic-token-ring-pez-dispenser-resetters?
Ejay Hire
-Original Message-
From: RamG [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 28, 2001 2:29 PM
To: [EMAIL PROTECTED]
Subject: Re: TR Int Errr [7:6112]
Hello Gang - I am having problem bring up TR int. Following
:(646) 792.2396
- Original Message -
From: David Chandler
To:
Sent: Tuesday, May 29, 2001 8:22 AM
Subject: Re: TR Int Errr [7:6112]
1. Swap the cables between the 2502 and 2504 (if you haven't already)
2. Swap the ports on the MAU.
If 1 and 2 do not work get rid of the 2502
Hello Gang - I am having problem bring up TR int. Following is the output.
R2502#show interface tokenring0
TokenRing0 is initializing, line protocol is down
Hardware is TMS380, address is .30ba.4a52 (bia .30ba.4a52)
MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load
How about 'ring-speed 4' ?
RamG wrote in message ...
Hello Gang - I am having problem bring up TR int. Following is the output.
R2502#show interface tokenring0
TokenRing0 is initializing, line protocol is down
Hardware is TMS380, address is .30ba.4a52 (bia .30ba.4a52)
MTU 4464
Hello Gang - I am having problem bring up TR int. Following is the debug
output.
R2502#debug token ring
Token Ring Interface debugging is on
R2502#
02:46:48: %TR-3-OPENFAIL: Unit 0, open failed: Phys. Insertion, ring
beaconing
02:46:50: TR0 starting.
02:47:12: %TR-3-OPENFAIL: Unit 0, open
Newbie question,
On your router is the show conf giving us the contents of the
startup-config or the running-config? On your router are they both the same?
Saved?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6134t=6112
--
FAQ,
It is startup-config info. I tried changing ring speed to 4 later to 16
to see it could fix the problem. Changing the ring speed did not do any
good.
Thanks / RamG
Larry trav wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Newbie question,
On your router is the show conf
Newbie again,
Because I know nothing about T-R, I'm trying to get more from this than you
are, but doesn't beaconing means the ring is broken and it's trying to
repair/reconfigure itself.
Are you connected to a T-R net, or just trying to configure the router for
T-R?
When the Line protocol is
Hi RamG,
tell us more about to what the Tokenring Interface is connected to.
a MAU ? a TR-Switch ? Is the port you want to connect to and the cabling
fine and does it support the configured 16MHz TokenRing ?
Reinhold
On Mon, 28 May 2001, RamG wrote:
Hello Gang - I am having problem bring up
Is there anything else plugged into your MAU (a PC or anything)? TR doesn't
want to come up if its the only device in the ring, since, well, you can't
have a 1-station ring. :-)
HTH,
doctorcisco
From: RamG
Reply-To: RamG
To: [EMAIL PROTECTED]
Subject: TR Int Errr [7:6112]
Date: Mon, 28 May
12 matches
Mail list logo
