To all,
I have been trying to telnet to remote router (2501) and the connection is
opened, but I never receive a password prompt. I telnetted to a directly
connected router and did a "sh cdp neigh det" and the router is listed as a
cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/P
On Wed, 26 Jul 2000, Rossetti, Stan wrote:
> To all,
>
> I have been trying to telnet to remote router (2501) and the connection is
> opened, but I never receive a password prompt. I telnetted to a directly
> connected router and did a "sh cdp neigh det" and the router is listed as a
> cisco ne
--Original Message-
From: J K [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 3:11 PM
To: [EMAIL PROTECTED]
Subject: Re: Telnet Problems
you need to allow vty access on vty 0 4
conf t
line vty 0 4
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Rossetti, Stan
> Sent: Wednesday, July 26, 2000 3:36 PM
> To: '[EMAIL PROTECTED]'
> Subject: Telnet Problems
>
>
> To all,
>
> I have been trying to telnet
Beeper: 544-1183 pin # 0112
<<...>>
-Original Message-
From: Roger Wang [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 3:39 PM
To: Rossetti, Stan; [EMAIL PROTECTED]
Subject: RE: Telnet Problems
>
can be problem!
good luck guy,
Leonardo.
-Mensagem original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de
Rossetti, Stan
Enviada em: quarta-feira, 26 de julho de 2000 16:36
Para: '[EMAIL PROTECTED]'
Assunto: Telnet Problems
To all,
I have been trying to telnet
Try extended ping command. Most likely, either your router
or the remote one has multiple ip addresses.
Jim Xie
At 02:36 PM 07/26/2000 -0500, Rossetti, Stan wrote:
>To all,
>
>I have been trying to telnet to remote router (2501) and the connection is
>opened, but I never receive a password pro
y 26, 2000 1:28 PM
Subject: Re: Telnet Problems
> On Wed, 26 Jul 2000, Rossetti, Stan wrote:
>
> > To all,
> >
> > I have been trying to telnet to remote router (2501) and the connection
is
> > opened, but I never receive a password prompt. I telnetted to a
directly
Hello,
I'm still having 2511 terminal server reverse telnet problems. This may be
a little long, but I want to provide all the details. Before I ramble on,
is there any way to verify that the 2511 line interface hardware is not
broken ? I've swapped out my octal cable and I've
.
-- Kevin
- Original Message -
From: "perryb" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 05, 2001 2:02 PM
Subject: 2511 Reverse Telnet Problems - Long
> Hello,
>
> I'm still having 2511 terminal server reverse telnet problems. Thi
uot;Kevin Welch" <[EMAIL PROTECTED]>
To: "perryb" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, April 05, 2001 7:47 PM
Subject: Re: 2511 Reverse Telnet Problems - Long
> It looks like the lines are configured with two stop bits instead of one:
We have about 90 routers at our branches and all have a dial backup modem
attached to the aux port. At all of them I can access the modem using
reverse telnet except for the two locations with 2600 series routers; the
rest of the routers are 2520s. Does the 2600 series have some extra
configurat
From: "John Neiberger" <[EMAIL PROTECTED]>
> Newsgroups: groupstudy.cisco
> Sent: Tuesday, August 22, 2000 4:59 PM
> Subject: Cisco 2620 and Reverse Telnet Problems
>
>
> > We have about 90 routers at our branches and all have a dial backup
modem
>
Try this
On terminal Server 2511, do not use "no
exec" command.
It will fix this problem..
Arun
--- perryb wrote:
> Hello,
>
> I'm still having 2511 terminal server reverse telnet
> problems. This may be
> a little long, but I wan
e:
> > Hello,
> >
> > I'm still having 2511 terminal server reverse telnet
> > problems. This may be
> > a little long, but I want to provide all the
> > details. Before I ramble on,
> > is there any way to verify that the 2511 line
> > interfac
ssage -
From:
To:
Sent: Thursday, April 26, 2001 4:44 AM
Subject: Re: 2511 Reverse Telnet Problems - Long [7:2041]
> Add to the 2511:
>
>
>
> line 1 16
> speed 9600
> databits 8
> parity none
> STOPBITS 1
> flowcontrol none
>
> ***
16 matches
Mail list logo