On May 30, 7:10am, Hire, Ejay wrote:
}
} Back to the off topic subject of Liquid cooled CPU's, most desings I've
seen
} use mineral oil. A fault with this design is that bubbles of moisture
can
} settle out and sink onto the Board/cpu.
The other thing I was wondering is wouldn't the
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
My first job in networking, or should I say connecting Sun 350's to
thicknet ethernet vampire taps until they let me get my newbie hands on
those brand new Cisco thingies, was at Cray Research. The Cray2 circuit
boards were immersed in florinert (sp?) to keep them cool. Ran about
$400 a gallon
Flourinert - (Pronounced Floor-in-ert) is pretty neat stuff. You can put
your tv in a tank of the stuff and keep on watching. also, if you've got a
intermittent solder joint, plug it in and dunk it in florinert. You'll see
a thin stream of bubbles rising from the fault. First time I saw it
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to i
On a slightly more serious note, I installed 802.11 at our local Starbucks
and the signal quality if pretty bad. We finally realized that it was being
affected by all the jugs of coffee and other liquids and by the big bags
of mostly water (humans). (Some StarTrek creature referred to humans
really? we did a roll out to starbucks nationwide through mobilestar using
ap340's and some nokia and 2621 routers. We never saw these issues. Was
this a private contract you did with them? And where did you place the
antenneas?
Patrick Ramsey
Sr. Network Engineer
WellStar Health Systems
I was wondering if someone would respond that way! ;-) We did this a while
ago before corporate Starbucks decided to roll out their approved method.
I think it was over a year ago that we put it in.
We use the Apple Airport. We didn't use any antennae beyond the antenna
inside the Airport. We
Hello,
One of my clients has 2 buildings, distance around 1
mile. They are considering using Cisco wireless
solution. I checked Cisco web site and found 350 only
supports 2000 feet outdoor at 1MB. I'm wondering if I
can use some kind of antenna? Does Cisco make bigger
antenna?
Thanks in
I've heard of a Cisco antenna boosters. Check the qprg. or
http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/airoa_ds.htm
Some directional antennas can get up to 25 miles. You may need a line of
sight though. Check with Cisco
FYI, Linksys wireless access points can be hacked via
Network Analyst - Grubb Ellis
[EMAIL PROTECTED]
-Original Message-
From: Steven A. Ridder [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 03, 2002 2:17 PM
To: [EMAIL PROTECTED]
Subject: Re: wireless max distance question [7:30822]
I've heard of a Cisco antenna boosters. Check
up...rofl.
Allen
- Original Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried it,
and it's obviously not something you'd want to implement
/users/wireless/pringles.php
Jeff Jarmoc - CCSA, CCNA, MCSE
Network Analyst - Grubb Ellis
[EMAIL PROTECTED]
-Original Message-
From: Steven A. Ridder [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 03, 2002 2:17 PM
To: [EMAIL PROTECTED]
Subject: Re: wireless max distance question [7
Message -
From: Jarmoc, Jeff
To:
Sent: Thursday, January 03, 2002 3:43 PM
Subject: RE: wireless max distance question [7:30822]
There's also the good ol' 802.11b pringles can hack. I haven't tried
it,
and it's obviously not something you'd want to implement in a business
environment,
Priscilla,
Didn't you see where it says you're suppose to eat the chips first and use
the *empty* can?
I don't think you considered what would happen to the signal when
moisture/mold/mildew set in. You'd have a soggy pile of living stuff,
which would probably really mess up the signal
Jim,
It really depends on what kind of antenna and what's in between (you'll need
to calculate your fresnel zone). If you have a clear line of site, you
should be fine with a good antenna. If you have some trees or whatnot, you
might need a 1W amp. Ive been doing a lot of research on wireless
20 matches
Mail list logo
