Re: Stus-List Sale alert automatic inflatable harness

Hi Bill, Mustang did the MAC deflatable wings in 1988 with a retail version in 1997. I still have my "floater coat" from the mid-70s. The high end unit with a "beavertail" to delay the onset of hypothermia, developed in conjunction with a research team at University of Victoria. Check out

Stus-List Feathering props

Davidmy LF38 came with an AutoStream stainless feathering prop...I thank my PO every year.  I just add grease, change O rings, and never a problem.   Forward and reverse thrust is superb.  I can get up to about 7+ knots...depending on waves and headwinds.Westerberg 27 Diesel.Spencer

Re: Stus-List Flooring

There are significant differences even between different varnish finishes. They are not all the same when wet! Bill Bina On 2/22/2016 7:22 PM, schiller via CnC-List wrote: I wouldn't think it would be any worse than a varnished wood floor. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark

Re: Stus-List Flooring

I wouldn't think it would be any worse than a varnished wood floor. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark I) "Corsair" On 2/22/2016 5:29 PM, BillBinaList via CnC-List wrote: My biggest concern would be whether it is slippery when wet. Bill Bina On 2/22/2016 4:44 PM, schiller via

Re: Stus-List Replying recommendations

My bad. I will be more attentive in the future. In response to some responses; I am located in Havre de Grace MD. I like the look of the homemade bearing pusher, will look into making my own. -- Brian Fry S/V La Neige 1993 C 37/40XL HdG Maryland

Re: Stus-List Cutlass bearing removal

I tried making something similar out of G10 and long bolts. Problem was the difference between the inside and outside dimension was either1/4 or 3/8 inch, so I could not get a collar. That would press out the old bearing. My mechanic pulled the tranny and slipped the shaft forward (I had removed

Re: Stus-List Flooring

My biggest concern would be whether it is slippery when wet. Bill Bina On 2/22/2016 4:44 PM, schiller via CnC-List wrote: We are having new cushions made for Corsair by Canvas Innovations in Holland, Michigan. While we were up finalizing the plan and selecting fabric, we saw a woven vinyl

Stus-List Flooring

We are having new cushions made for Corsair by Canvas Innovations in Holland, Michigan. While we were up finalizing the plan and selecting fabric, we saw a woven vinyl flooring made by Infinity Vinyl that look pretty interesting. It is used in Tiara Yachts and he was doing a Ski boat in his

Re: Stus-List Replying to messages

Sent from Mail for Windows 10 From: Stu via CnC-List Sent: February 22, 2016 3:16 PM To: cnc-list@cnc-list.com Cc: Stu Subject: Stus-List Replying to messages Just my friendly (maybe monthly) reminder when you reply to messages:   1.  Change the subject line so that it reflects on the content

Stus-List Cutlass bearing removal

Sorry for not changing the subject... -- Original Message -- From: Danny Haughey via CnC-List To: cnc-list@cnc-list.com Cc: Danny Haughey Subject: Re: Stus-List CnC-List Digest, Vol 121, Issue 69 Date: Mon, 22 Feb 2016 20:32:30 GMT

Re: Stus-List CnC-List Digest, Vol 121, Issue 69

here is an interesting group of pictures of a homemade solution of what you're looking for. http://www.shamrockboatownersclub.com/forums/showthread.php?13492-Line-cutter-installation-cutless-cutlass-puller=03d15f81d3d8790bc364ab5cf8f81f8a -- Original Message -- From: Brian Fry

Stus-List Replying to messages

Just my friendly (maybe monthly) reminder when you reply to messages: 1. Change the subject line so that it reflects on the content of the message. “Digest vol xxx issue xxx” does not tell anyone what is in the post. 2. Please trim your message. No problem if the last email is included, but

Re: Stus-List CnC-List Digest, Vol 121, Issue 69

Where are you located Brian? I have a StrutPro tool …. Paul Fountain Perception II 1985 C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Fry via CnC-List Sent: Monday, February 22, 2016 2:43 PM To: cnc-list@cnc-list.com Cc: Brian Fry

Re: Stus-List CnC-List Digest, Vol 121, Issue 69

Does anyone have a cutlass bearing removal tool I could borrow? The yard won't let me borrow theirs. I'd rather press it out than cut it out, to get an accurate measurement. > Message: 4 > Date: Sun, 21 Feb 2016 22:24:49 + (UTC) > From: Chuck S > To: "CNC boat

Re: Stus-List Sale alert automatic inflatable harness

I thought Sospenders came up with these first, but maybe they were just the first in the USA. Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Friday, February 19, 2016 12:07 PM To: cnc-list@cnc-list.com Cc:

Re: Stus-List paragon v-drive transmission

One of the times I changed trannies, I had to modify the lever on the tranny. I had to drill a hole closer to the axis, as It didn’t have enough throw to completely engage reverse. This shortened the length you had to move the lever. I have to agree, no one would design a shift wherein you had

Re: Stus-List Feathering props...

We are very pleased with our feathering three blade prop. It is a 'J' Prop, made in Italy, represented in the USA by Beta Marine I think, and by Stright Mackay, and Holland Marine in Canada. Pitch can be adjusted in the water without tools (other than an Allen key). All gearing is internal,

Re: Stus-List Thin plastic sheet for headliner access and

Have you thought about using fiberglass reinforced wall panels like the ones used in bathrooms. A 4x8 sheet goes for about $30 at Lowes or Home Depot. This is what a previous owner used on my LF38.Attached is a link to an old photo showing the panels.

Stus-List Feathering props...

As I am happy with my MaxProp, I was not paying attention to the last discussion. My good friend, however is replacing the his fixed three bladed with a feathering. Cost is not the issue but quality and design is. I like my Max Prop due to its blades are more conducive to racing, but he is