Hello all,
I was preparing to order a cover for my C&C 30-1 when I remembered that
C&C had changed the boom height somewhere around hull number 254?Kinder
Industries has a pattern for a 30-1 but they don't know if its early or
late, If someone here could give me the measurement from the toe rail p
; this week and advise you of costs...
>
> Bob
>
> Bob Boyer
> S/V Rainy Days (1983 C&C Landfall 38 - Hull #230)
> Blog: dainyrays.blogspot.com
> Email: dainyr...@icloud.com
> Annapolis, MD
> (Presently in Baltimore MD for the summer)
>
> On Mar 8, 2021, at 1
Hello Bob,
We made it home safe and sound. Let me know when you have the totals for
the shipping of the door and hardware and I will pay.
Regards
Lewis
On Jan 27, 2021 12:05 PM, "Robert Boyer via CnC-List"
wrote:
> I have an interior teak door from my C&C Landf
Hello Charles,
I have hull #45, Next time I go down to check on her I will look to see if
there are any markings on the shaft.
Lewis Cooke
S/V For Play
C&C 30-1 #45
Lorain, OH
On Feb 22, 2021 12:34 PM, "Cleverboy via CnC-List"
wrote:
> While it's snowing, planning still goes on. I am trying to
First thing first, I would do a compression test to determine how good the
motor is. The best upgrades I did where electric fuel pump, electronic
ignition, coil, Indigo electronics thermostat kit which helps with the rear
cylinder running cool and gumming up the valves.
Lewis Cooke
A/V For Play
C&
Hello All,
I agree with everything that has been mentioned but also you need to check
your keel bolts and washers before you get into epoxy and fairing.
Lewis
S/V 4 Play
C&C 30-1 #45
Lorain, OH
On Thu, Jan 21, 2021 at 10:46 PM Juliano Franz via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi B
Hello Ron,
I rebuilt my whole fuel system and installed a fuel filter/water seperator
and had no problem with fuel flow, make sure your tank vent is clear.
Lewis
S/V For Play
C&C 30-1 #45
Lorain, OH
On Sep 11, 2020 1:12 AM, "Ronald B. Frerker via CnC-List" <
cnc-list@cnc-list.com> wrote:
> Well,
Thank you everyone for your input, looks like I'm going with the 12/24
fridge and a two burner propane stove, solar panels are in order down the
road.
S/V For Play
C&C 30-1 #45
Lorain, OH
On Aug 28, 2020 2:39 PM, "Lewis Cooke via CnC-List"
wrote:
> Hello all,
> I Was
Hello all,
I Was hoping to get everyone's opinion, I am finishing my 72 C&C 30-1 and
I am stuck on what appliances to install. Fridge, propane stove,
microwave, one of those coolers thats a fridge/freezer. Obviously the
fridge and microwave would be dependent on shore power and we do not spend
a
WOW, glad you guys are ok. That must have been some impact!
Lewis Cooke
S/V For Play
C&C 30-1 #45
On Fri, Jun 19, 2020 at 5:36 PM Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello all,
>
> As an update, please see the photo of the damage to our boat.
>
> Boat Damage from Jetski.
p the ladder and installed
> the pin with roller bearings.
>
>
>
> Do you know if the steering system on you C&C 30 is Edson or Whitlock or
> which brand?
>
>
>
> Chuck S
>
>
>
>
>
> On June 15, 2020 at 7:37 AM Lewis Cooke via CnC-List <
> cnc-list@cn
Joel,
I'm in the middle of doing mine on a 30-1 it's not hard but the rudder
does weigh around 100 lbs.
You're going to need about 2 feet of clearance under the rudder (assuming
you're on the hard) to pull the rudder completely out.
The steering quadrant should have one a through bolt and four bo
I am working on an early C&C 30-1 does anyone have a pic of the origanal
cove stripe. I see that Holland marine sells the stars and diamonds but
they say the stripes the have are an inch wide half inch with eighth inch
on either side can anyone confirm this, thank you
Lewis Cooke
C&C 30-1 #45
S/V F
There is a Youtube video I believe the channel is called sailing Uma. They
have a pearson 38 with the same problem (keel wag) anyhow there is a full
video of them repairing it, hope that helps.
Lewis Cooke
S/V For Play
C&C 30-1 #45
On Apr 19, 2020 9:46 PM, "Chris Bennett via CnC-List"
wrote:
F
14 matches
Mail list logo
