I did not, All the ones I saw there seems to either be either the universal
style where is seems to penetrate the hull or their base plates are flat. The
base plate on mine is "V" shaped.
Danny
-- Original Message --
From: "Bill Coleman"
To:
Subject:
Did you go through the entire exercise on Buck Algonquin? Looks like you
can input your angle, offsets, diameter, etc and it will pick out a strut
for you.
Bill Coleman
C&C 39
-
So, Ontario yachts are still in business. I decided I would take a chance
and and send them an email. i found
Wally Bryant
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Broken strut
Date: Mon, 18 Nov 2013 19:02:17 +
And, actually, I have a SS prop, which has lasted far longer than any
bronze prop I've ever owned.
After buying my fourth bronze prop, I said heck with it and bought this
Autostream
And, actually, I have a SS prop, which has lasted far longer than any
bronze prop I've ever owned.
After buying my fourth bronze prop, I said heck with it and bought this
Autostream prop.
It was just a hot marina, though. Heck, these days I go through a zinc
every two or three years... No elec
ist.com
Subject: Re: Stus-List Broken strut
Prop shafts are stainless, they spend a lot of time under water, including
under seawater…I am not sure what problem Joel was anticipating
Dwight Veinot
Alianna
C&C 35 MKII
Head of St. Margaret's Bay, NS
On Sun, Nov 17, 2013 at 7:10
e strut is stainless. It shouldn't be
an issue and it would certainly be stronger.
Jake
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Joel Aronson
Sent: Sunday, November 17, 2013 5:32 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Broken strut
Do you want stainless und
l Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com ] On
Behalf Of Bill Bina
Sent: Sunday, November 17, 2013 4:37 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Broken strut
It also might be worth calling Garhauer. They do custom machining work, and
their prices are usually
II
>> Hampton Va
>>
>>
>>
>>
>>
>> -Original Message-
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill
>> Bina
>> Sent: Sunday, November 17, 2013 4:37 PM
>> To: cnc-list@cnc-list.com
>> Subject:
Sent: Sunday, November 17, 2013 4:37 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Broken strut
It also might be worth calling Garhauer. They do custom
machining work, and
their prices are usually very reasonable a
- Original Message -
From: "Wally Bryant"
To:
Sent: Sunday, November 17, 2013 11:14 AM
Subject: Re: Stus-List Broken strut
I'd clean it up well before making a decision. A bronze brush on a right
angle air powered die grinder will take that strut down to bare met
; Hampton Va
>
>
>
>
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com ] On
> Behalf Of Bill Bina
> Sent: Sunday, November 17, 2013 4:37 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Broken strut
>
> It also might be worth
17, 2013 4:37 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Broken strut
It also might be worth calling Garhauer. They do custom machining work, and
their prices are usually very reasonable and the quality high.
Bill Bina
On 11/17/2013 12:19 PM, Dennis C. wrote:
> I'd get a good
It also might be worth calling Garhauer. They do custom machining work,
and their prices are usually very reasonable and the quality high.
Bill Bina
On 11/17/2013 12:19 PM, Dennis C. wrote:
I'd get a good estimate from a prop repair shop before deciding.
Dennis C.
Sent from my iPhone
__
st old and the composition changed...
Danny
-- Original Message --
From: Rick Bushie
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Broken strut
Date: Sat, 16 Nov 2013 22:02:42 -0500
My strut broke 2 years ago. It was the design that bolted onto the
bottom. When I co
ny improvement
> I can make on the original design? I guess the original lasted 40 years (I'm
> assumimg it is original) so, it is probably safe to say the design is
> sufficient. LOL
>
> Danny
>
>
> -- Original Message --
> From: Rick Bushie
&
I'd clean it up well before making a decision. A bronze brush on a
right angle air powered die grinder will take that strut down to bare
metal really fast. Or an electric drill, but it will take a bit
longer.Based on that picture I wouldn't make any decisions. Surface
discoloration happe
LOL
Danny
-- Original Message --
From: Rick Bushie
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Broken strut
Date: Sat, 16 Nov 2013 22:02:42 -0500
My strut broke 2 years ago. It was the design that bolted onto the bottom. When
I couldn't find a new one, I took it into a s
Danny
-- Original Message --
From: Rick Bushie
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Broken strut
Date: Sat, 16 Nov 2013 22:02:42 -0500
My strut broke 2 years ago. It was the design that bolted onto the bottom. When
I couldn't find a new one, I took it into a shop f
My strut broke 2 years ago. It was the design that bolted onto the bottom. When
I couldn't find a new one, I took it into a shop for repair. It turned out
beautifully! Then it broke right above the repair the first time I engaged the
reversing gear. I wound up installing a through hull design.
wrote:
No, not really. the break was slightly, even
green. The boat was hauled for about 2 weeks before I got to look at it
T-Mobile. Americaâs First Nationwide 4G Network
- Reply message -
From: "Russ & Melody"
To:
Subject: Stus-List Broken Strut
Date: Fri, Nov 15, 2013
No, not really. the break was slightly, even green. The boat was hauled for
about 2 weeks before I got to look at it
T-Mobile. America’s First Nationwide 4G Network
- Reply message -
From: "Russ & Melody"
To:
Subject: Stus-List Broken Strut
Date: Fri, Nov 15, 2013 7:
rut...
>
> Danny
>
> -- Original Message --
> From: Jim Watts
> To: 1 CnC List
> Subject: Re: Stus-List Broken Strut
> Date: Fri, 15 Nov 2013 09:27:16 -0800
>
> Have you checked Buck Algonquin for a match?
>
> http://catalog.buckalgonquin.com/cat
#x27;m assuming this isn't the only boat that used this strut...
Danny
-- Original Message --
From: Jim Watts
To: 1 CnC List
Subject: Re: Stus-List Broken Strut
Date: Fri, 15 Nov 2013 09:27:16 -0800
Have you checked Buck Algonquin for a match?
<http://catalog.buckalgonqui
s C.
Touche' 35-1 #83
Mandeville, LA
>
> From: "djhaug...@juno.com"
>To: cnc-list@cnc-list.com
>Sent: Friday, November 15, 2013 2:03 PM
>Subject: Re: Stus-List Broken Strut
>
>
>
>The guy at the yard checked buck algo
t... Danny
-- Original Message --
From: Jim Watts
To: 1 CnC List
Subject: Re: Stus-List Broken Strut
Date: Fri, 15 Nov 2013 09:27:16 -0800
Have you checked Buck Algonquin for a match?
http://catalog.buckalgonquin.com/category/struts-1
On 15 November 2013 09:03, djhaug...@juno.
That should be repairable at a good welding shop
Rich
> On Nov 15, 2013, at 13:03, "djhaug...@juno.com" wrote:
>
>
> So, my prop strut was broken when they hauled my boat this year. I got, "did
> you know your strut was broken? You must have had terrible vibrations." I
> didn't have any
Have you checked Buck Algonquin for a match?
http://catalog.buckalgonquin.com/category/struts-1
On 15 November 2013 09:03, djhaug...@juno.com wrote:
>
> So, my prop strut was broken when they hauled my boat this year. I got,
> "did you know your strut was broken? You must have had terrible
ect: Stus-List Broken Strut
So, my prop strut was broken when they hauled my boat this year. I got,
"did you know your strut was broken? You must have had terrible
vibrations." I didn't have any that I noticed. Then he says, " maybe
you should go to a regular prop"
So, my prop strut was broken when they hauled my boat this year. I got, "did
you know your strut was broken? You must have had terrible vibrations." I
didn't have any that I noticed. Then he says, " maybe you should go to a
regular prop" I said " that set up has been on the boat 40 years w
29 matches
Mail list logo
