c-list.com
> *Cc:* Shawn Wright
> *Subject:* Re: Stus-List Exterior hatch knob
>
> I agree that a SS option would be better. One of mine appears to be the
> newer style, but I admit that this is one area of the boat I have not
> inspected closely at all. I do plan to replace the po
, 2020 7:24 PM
To: cnc-list@cnc-list.com
Cc: Shawn Wright
Subject: Re: Stus-List Exterior hatch knob
I agree that a SS option would be better. One of mine appears to be the newer
style, but I admit that this is one area of the boat I have not inspected
closely at all. I do plan to replace the ports
I agree that a SS option would be better. One of mine appears to be the
newer style, but I admit that this is one area of the boat I have not
inspected closely at all. I do plan to replace the ports and hatch lenses
at some point in the future, if we don't find another boat first... Saw a
very nice
Thanks Shawn. I think a machine shop could make a pair of knobs out of
stainless steel for the ptice of one new one from A&H. Besides the new ones
don’t look to be the same and I believe they are designed to work with a
spring seal which mine doesn’t have. Right now it works held together with
a ju
One of ours has been replaced with a similar knob, but with a different
knurling pattern, so I suspect it's a later version from A&H. The old knob
is in a parts bin, but I haven't checked to see what is wrong with it. The
hatch is working fine aside from a few drips in heavy rain, so I've just
left
I've had good results repairing plastics with epoxy. Remove the knob; break
it open and repair with epoxy.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
On Wed, Jun 24, 2020 at 10:58 AM Ken Heaton via CnC-List <
cnc-list@cnc-list.com> wrote:
> Does anything here match what you are look
Does anything here match what you are looking for?
https://www.atkinshoyle.com/products/parts-department.html
Ken H.
On Wed, 24 Jun 2020 at 12:00, dwight veinot via CnC-List <
cnc-list@cnc-list.com> wrote:
> Alianna has the original 24x24 inch Atkins and Hoyle hatch above the
> v-berth. This h
Buy a new knob from them.
Joel
On Wed, Jun 24, 2020 at 11:00 AM dwight veinot via CnC-List <
cnc-list@cnc-list.com> wrote:
> Alianna has the original 24x24 inch Atkins and Hoyle hatch above the
> v-berth. This hatch has served well and has not been a source of
> leaks but just lately I noticed
Alianna has the original 24x24 inch Atkins and Hoyle hatch above the
v-berth. This hatch has served well and has not been a source of
leaks but just lately I noticed that one of the exterior aluminum
knobs has cracked and if not for the clamp I have holding it together
it would likely fall off. I
