Stus-List Fuel tank replacement

2015-05-03 Thread Phil via CnC-List
My fuel tank on my LF 38 began leaking pretty badly recently. I pumped out all of the diesel. What are my options for replacement? Should I replace with a stock sized tank or go another route? Is this something I can do myself? -Phil James 1982 C&C LF 38 Annapolis, MD _

Stus-List Fuel tank replacement

2015-05-03 Thread Daniel Sheer via CnC-List
Pegathy's PO or predecessor did a fuel tank replacement. They sawed a piece out of the starboard lazarette side to get it in and then did a good, but visible, patch job. It clearly was not easy. If I had to do it, I would indeed try to use a bladder inside the remains of the old tank. The old ta

Stus-List Fuel tank replacement

2017-09-10 Thread robert via CnC-List
I just measured my fuel tank.27" wide, 16" deep, 12" height+7" top clearance to the cockpit solenot the easiest to access to remove it but doable with some four letter words and beers. Need to ensure the in fill on the tank has a 90 deg. intake to make connecting the in hose easy,

Stus-List Fuel tank replacement

2017-09-10 Thread robert via CnC-List
Dennis: I looked at the Moeller 19 gal. ( 032597)..the fitting for the in fill hose and the vent hose are nothing like I have now.my in fill hose is approx. 2" .are there special adapters needed. I can send you a few pictures of my existing tank configuration off line so you can

Stus-List Fuel tank replacement

2017-09-12 Thread robert via CnC-List
I have been talking to boat owners at our club about these decades old aluminum fuel tanks many of us C&C'ers have.a few have had the tanks leak (or weep) as they call it. The leak(s) were not caused by the bottom(s) rusting (as aluminum does not rust, it corrodes) ..the leaks were cau

Stus-List Fuel Tank Replacement

2017-09-14 Thread William Walker via CnC-List
Moving ahead on the project. Old tank out. New ordered and delivered by Amazon in 2 days..Moeller 19 gallon, 16 x 12 x 26. 90 degree hose and straight hose connector as I think Dennis mentioned. Two questions: First, if I leave at least 2 inches of the 1.5 inch fuel line inlet connector, can I

Stus-List Fuel Tank Replacement

2017-09-15 Thread robert via CnC-List
Bill: Just curioushow did you remove the diesel from the old tank? Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2017-09-14 1:43 PM, William Walker via CnC-List wrote: Moving ahead on the project. Old tank out. New ordered and delivered by Amazon in 2 days..Moeller 19 gallon, 16 x 12 x

Stus-List Fuel Tank Replacement

2017-09-20 Thread robert via CnC-List
John: Timely and relevant information from my perspective. My fuel tank is a 33 year old aluminum and it has a dedicated fuel return fitting. I looked at the Moeller plastic fuel tanks and decided against it, not for the fire safety reason (actually didn't know and/or think about it now th

Stus-List Fuel tank replacement

2020-05-29 Thread Mike Rose via CnC-List
Hi there- I am looking to upgrade my fuel tank for added capacity. When I purchased the boat 20 years ago, I discovered a leaking aluminum tank weeks before launch. I located a 16.5 gal.Tempo tank that would easily fit. Now looking for a new tank, I have two questions: 1-Tempo seems to be gone, wh

Re: Stus-List Fuel tank replacement

2015-05-03 Thread Robert Boyer via CnC-List
Phil: I just did this replacement last winter in my LF38. I had my boat yard do it but I could have done it myself if I had enough time. The partial bulkhead just in front of the tank has to be completely removed--a Fein saw works great for this! Then you have to remove the water heater and

Re: Stus-List Fuel tank replacement

2015-05-03 Thread Ken Heaton via CnC-List
I'm sure Wally will offer a few words when he is next on his email but he did document this back when he did it to his LF 38 here: http://www.wbryant.com/StellaBoat/Projects/fuel/index.htm Ken H. On 3 May 2015 at 11:17, Phil via CnC-List wrote: > My fuel tank on my LF 38 began leaking pretty ba

Re: Stus-List Fuel tank replacement

2015-05-03 Thread Dennis C. via CnC-List
You might want to explore a bladder tank. I know we boaters have a serious mindset towards hard tanks but diesel bladder tanks are quite reliable and can be custom made. Can you cut the top off your existing tank, patch the holes with JB Weld or similar then drop in a custom bladder tank? Th

Re: Stus-List Fuel tank replacement

2015-05-03 Thread Robert Boyer via CnC-List
The quadrant is only an inch above the tank on a LF 38 and there is no way I'd ever consider a bladder tank in such a precarious position on my boat. A little bit of rubbing from the cable and you would have diesel fuel all over the place. Bob Boyer S/V Rainy Days / Annapolis MD 1983 C&C Landf

Re: Stus-List Fuel tank replacement

2015-05-03 Thread Rick Brass via CnC-List
And good luck. Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Phil via CnC-List Sent: Sunday, May 03, 2015 10:18 AM To: cnc-list@cnc-list.com Subject: Stus-List Fuel

Re: Stus-List Fuel tank replacement

2015-05-04 Thread Robert Boyer via CnC-List
Another disadvantage of going with a bladder is that you couldn't use a fuel gauge to tell fuel level. If you intend to do any kind of cruising, this would be a big disadvantage. Bob Boyer S/V Rainy Days / Annapolis MD 1983 C&C Landfall 38 - Hull #230 email: dainyr...@icloud.com blog: dainyray

Re: Stus-List Fuel tank replacement

2017-09-10 Thread Gary Nylander via CnC-List
PM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List Fuel tank replacement I just measured my fuel tank.27" wide, 16" deep, 12" height+7" top clearance to the cockpit solenot the easiest to access to remove it but doable with some four letter words and beers.

Re: Stus-List Fuel tank replacement

2017-09-10 Thread Dennis C. via CnC-List
ber 10, 2017 3:03 PM > To: cnc-list@cnc-list.com > Cc: robert > Subject: Stus-List Fuel tank replacement > > I just measured my fuel tank.27" wide, 16" deep, 12" height+7" > top clearance to the cockpit solenot the easiest to access to remove >

Re: Stus-List Fuel tank replacement

2017-09-10 Thread John and Maryann Read via CnC-List
list-boun...@cnc-list.com] On Behalf Of robert via CnC-List Sent: Sunday, September 10, 2017 3:03 PM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List Fuel tank replacement I just measured my fuel tank.27" wide, 16" deep, 12" height+7" top clearance to the cockp

Re: Stus-List Fuel tank replacement

2017-09-10 Thread David Kaseler via CnC-List
Lots of folks have been talking about fuel tank fill and advising a 90 degree intake for simpler hose attachment. SLY has two fuel tanks, one plastic under the cockpit where the original aluminum one was with a straight vertical intake hose connection, plus another stainless tank forward under

Re: Stus-List Fuel tank replacement

2017-09-11 Thread Della Barba, Joe via CnC-List
List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Sunday, September 10, 2017 5:08 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Fuel tank replacement Probably this site: http://www.fillernecksupply.com/fuel-hose-elbows/?sort=featured&page=1 Gates make

Re: Stus-List Fuel tank replacement

2017-09-11 Thread Della Barba, Joe via CnC-List
: Stus-List Fuel tank replacement http://www.fillernecksupply.com/gates-1-1-2-90-degree-fuel-filler-elbow-gates-24715-goodyear-59205/ Wow – I could have saved about $100 if I knew about this! That would be perfect for the 35, just need a hose-to-hose for the 1/5” fill. Joe Della Barba Coquina C&a

Re: Stus-List Fuel tank replacement

2017-09-11 Thread Dennis C. via CnC-List
; Joe Della Barba > > Coquina > > C&C 35 MK I > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Dennis > C. via CnC-List > *Sent:* Sunday, September 10, 2017 5:08 PM > *To:* CnClist > *Cc:* Dennis C. > *Subject:* Re: Stus-List

Re: Stus-List Fuel tank replacement

2017-09-12 Thread Gary Nylander via CnC-List
: Stus-List Fuel tank replacement I have been talking to boat owners at our club about these decades old aluminum fuel tanks many of us C&C'ers have.a few have had the tanks leak (or weep) as they call it. The leak(s) were not caused by the bottom(s) rusting (as aluminum does not rust, it

Re: Stus-List Fuel tank replacement

2017-09-12 Thread Della Barba, Joe via CnC-List
m Cc: robert Subject: Stus-List Fuel tank replacement I have been talking to boat owners at our club about these decades old aluminum fuel tanks many of us C&C'ers have.a few have had the tanks leak (or weep) as they call it. The leak(s) were not caused by the bottom(s) rusting (as alum

Re: Stus-List Fuel tank replacement

2017-09-12 Thread Rick Brass via CnC-List
Cc: Gary Nylander Subject: Re: Stus-List Fuel tank replacement The bottom of my tank had a bunch of pin holes in the flat part. The seams were fine. Gary ___ This list is supported by the generous donations of our members. If you wish to make a

Re: Stus-List Fuel tank replacement

2017-09-12 Thread Bill Dakin via CnC-List
I scoped the fuel tank inside (after pumping out old fuel) and outside with an automotive inspection unit with LED light before putting Tapestry into service. The exterior was pristine and the interior without pitting. I would do the same prior to replacement, or without access to a scope, obtain

Re: Stus-List Fuel Tank Replacement

2017-09-14 Thread Della Barba, Joe via CnC-List
. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Thursday, September 14, 2017 12:43 PM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Stus-List Fuel Tank Replacement Moving ahead on the project. Old tank out. New ordered

Re: Stus-List Fuel Tank Replacement

2017-09-14 Thread William Walker via CnC-List
tions will now go to the ground part of the fuel gauge connection.   Joe Coquina   From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Thursday, September 14, 2017 12:43 PM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Stus-List Fuel

Re: Stus-List Fuel Tank Replacement

2017-09-14 Thread John and Maryann Read via CnC-List
1982 C&C 34 Noank, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Thursday, September 14, 2017 12:43 PM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Stus-List Fuel Tank Replacement Moving ahead on the project. Old

Re: Stus-List Fuel Tank Replacement

2017-09-14 Thread William Walker via CnC-List
amp;C 34 Noank, CT   From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Thursday, September 14, 2017 12:43 PM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Stus-List Fuel Tank Replacement   Moving ahead on the project. Old tank out.  New or

Re: Stus-List Fuel Tank Replacement

2017-09-15 Thread Edward Levert via CnC-List
I used the brass Jabsco hand pump used for oil changes, exchanging the small tube for the dipstick with a piece of tubing that fit the input of the pump. Took about 20 minutes to empty 12 gallons. Ed Levert C&C 34 Briar Patch New Orleans, La. On Fri, Sep 15, 2017 at 7:11 AM, robert via CnC-List

Re: Stus-List Fuel Tank Replacement

2017-09-15 Thread Gary Nylander via CnC-List
8:12 AM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List Fuel Tank Replacement Bill: Just curioushow did you remove the diesel from the old tank? Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2017-09-14 1:43 PM, William Walker via CnC-List wrote: Moving ahead on the project.

Re: Stus-List Fuel Tank Replacement

2017-09-19 Thread John and Maryann Read via CnC-List
Allrighty then – have an alternate perspective on plastic fuel tanks. My trusty Yanmar mechanic (years of experience and formerly on their advisory group) indicates a plastic tank may create an issue of compliance to current regulations on fire safety in an enclosed area with an attendant impac

Re: Stus-List Fuel Tank Replacement

2017-09-20 Thread William Walker via CnC-List
John, Moeller tanks meet all USCG regs and ABYC, and more. Fire retardency is in the specs. Hose and hose clamps are also a place to be careful, as hose ratings vary widely and wrong hose can take you out of compliance quickly. I am not an expert, but having done some research before recent

Re: Stus-List Fuel Tank Replacement

2017-09-20 Thread William Walker via CnC-List
John, On the fuel return, Moeller does have a fuel level sending unit that is an option if you need a fuel return. It has a built in fuel return and is drop in replacement for standard fuel sending unit. I am not affiliated with Moeller. Bill Walker cnc 36 Sent from AOL Mobile Mail On Tuesd

Re: Stus-List Fuel tank replacement

2020-05-29 Thread Bill Coleman via CnC-List
Subject: Stus-List Fuel tank replacement Hi there- I am looking to upgrade my fuel tank for added capacity. When I purchased the boat 20 years ago, I discovered a leaking aluminum tank weeks before launch. I located a 16.5 gal.Tempo tank that would easily fit. Now looking for a new tank, I

Re: Stus-List Fuel tank replacement

2020-05-29 Thread Dennis C. via CnC-List
Moeller has a few tanks with angled fill nozzles. Whether they have one to fit your boat, who knows? There are a couple vendors of tank fittings which may offer solutions: fillernecksupply.com and tanksinc.com Dennis C. On Fri, May 29, 2020 at 10:01 AM Mike Rose via CnC-List < cnc-list@cnc-list

Stus-List Fuel tank replacement 35-1

2017-09-09 Thread Hervey Machen via CnC-List
Neil, Curious as to how you removed the fuel tank on your 35-1, as I've been concerned about our tank, but looks like a daunting task to remove the tank. Hervey Machen Ciothog 35-1, #115 Solomons MD ___ This list is supported by the generous donations of

Re: Stus-List Fuel tank replacement 35-1

2017-09-09 Thread Neil Gallagher via CnC-List
Hervey, Getting it out was not too difficult, the tank fits out through the lazarette under the starboard seat. My tank was held in place by two galvanized steel straps, corrosion from which caused the leak. Hardest part was undoing the fill and vent connections, had to get to them through

Re: Stus-List Fuel tank replacement 35-1

2017-09-09 Thread Dennis C. via CnC-List
Like Neil says, removing the tank is not difficult. Last time I pulled mine took less than an hour. I needed to get to the strut bolts. The concern is the elbow on the fill hose. If you damage it, replacement may be difficult. Gates makes an elbow that can be cut to fit but you may need a coup

Re: Stus-List Fuel tank replacement 35-1

2017-09-10 Thread William Walker via CnC-List
All this talk about leaking tanks caused mine to spring a leak on Fridayreally. Wish the access on my 36 was as good as others seem to have. Espar furnace and refrigeration complicate things for me. Dennis, what tank do you recommend? Good website for fitting install in plastic? Or do the

Re: Stus-List Fuel tank replacement 35-1

2017-09-10 Thread Dennis C. via CnC-List
I have a Plastimo (black) but would rather have a Moeller (translucent) because you can see the fuel level. Not sure about your configuration but you should be able to find a close fit. http://moellermarine.com/product-category/fuel-containment/permanent-fuel-tanks/ Determine which model best fi

Re: Stus-List Fuel tank replacement 35-1

2017-09-10 Thread William Walker via CnC-List
Thanks Dennis... Bill Walker ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!

Re: Stus-List Fuel tank replacement 35-1

2017-09-10 Thread Joe Della Barba via CnC-List
ailto:j...@dellabarba.com> Coquina C&C 35 MK i From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Sunday, September 10, 2017 8:47 AM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Fuel tank replacement 35-1 I have a Plastimo (black) bu