I have never figured out which one I have. It has roll pins to connect the
foils. Can never find the right pins and am missing the top cap and have
one broken connector. I kept all the pieces just in case I broke the new
one like I broke this one. I don't like the new one. It is 1" in diameter,
has
ct: Stus-List Re: Old Harken Roller II
I think you mean halyard “restrainer.”
From: ALAN BERGEN via CnC-List
Sent: Tuesday, July 13, 2021 12:27 AM
To: Stus-List
Cc: ALAN BERGEN
Subject: Stus-List Re: Old Harken Roller II
The fitting you are referring to is called a retainer. It is require
I think you mean halyard “restrainer.”
From: ALAN BERGEN via CnC-List
Sent: Tuesday, July 13, 2021 12:27 AM
To: Stus-List
Cc: ALAN BERGEN
Subject: Stus-List Re: Old Harken Roller II
The fitting you are referring to is called a retainer. It is required on many
boats with furler, if
The fitting you are referring to is called a retainer. It is required on
many boats with furler, if the halyard exits the mast too high.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
On Mon, Jul 12, 2021 at 6:15 PM Todd Williams via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am a n
s a lot easier solution.
Jeff Laman
1981 C&C34
Harmony
Ludington, MI
From: Todd Williams via CnC-List
Sent: Monday, July 12, 2021 9:14 PM
To: Stus-List
Cc: Todd Williams
Subject: Stus-List Re: Old Harken Roller II
I am a new C&C34 owner and initially had
I am a new C&C34 owner and initially had trouble with my Harken Furler. The
wire halyard wraps around at the masthead when furling. It was clear from
the fraying wire and twisted coil that this had been a problem. I switched
over to a braided line jib halyard and it works fine now. I also watched a
id you use for lube? (for the FURLER!!)
>>
>>
>>
>>
>>
>> Joe Della Barba
>>
>> Coquina C&C 35 MK I
>>
>> Kent Island MD USA
>>
>>
>>
>>
>>
>>
>>
>> From: Dave S via CnC-List
>> Sent:
Island MD USA
>
>
>
>
>
>
>
> *From:* Dave S via CnC-List
> *Sent:* Friday, July 9, 2021 8:43 PM
> *To:* Stus-List
> *Cc:* Korbey Hunt ; Dave S
> *Subject:* Stus-List Re: Old Harken Roller II
>
>
>
> Yes. I puzzled over this for 2 seasons, and ex
I rigorously flush my Harken furler's drum and swivel assemblies with dock
water every spring and sometimes in the fall. Use a hard jet spray and be
sure to spray each assembly from various angles. Particularly spray the
drum assembly from below and in the drum itself. You'll need to pull all
th
What did you use for lube? (for the FURLER!!)
Joe Della Barba
Coquina C&C 35 MK I
Kent Island MD USA
From: Dave S via CnC-List
Sent: Friday, July 9, 2021 8:43 PM
To: Stus-List
Cc: Korbey Hunt ; Dave S
Subject: Stus-List Re: Old Harken Roller II
Yes. I puzzled
ne else experience this?
> Get Outlook for Android
> From: dukatolla--- via CnC-List
> Sent: Friday, July 9, 2021 8:51:45 AM
> To: Danny Haughey via CnC-List
> Cc: dukato...@hotmail.com
> Subject: Stus-List Re: Old Harken Roller II
>
> Hi Danny,
>
> I have
C-List
Cc: dukato...@hotmail.com
Subject: Stus-List Re: Old Harken Roller II
Hi Danny,
I have a Harken II Unit 1
Same as Bruno Spare Connectors and a Foil..would be a great thing to
have in the parts department.
Cheers
Johnny Wright
1970 C&C36R
Sault Ste Marie, Ontario, Canada
FYI. Shipping has gone up appreciably lately.
Sent from my Android. Please forgive typos. Thank you.
From: Hoyt, Mike via CnC-List
Sent: Friday, July 9, 2021 3:19:12 PM
To: 'Stus-List'
Cc: Hoyt, Mike
Subject: Stus-List Re: Old Harken Roller II
Hi
Sent along with a RF headsail so shipping was
something like $150 at the time.
Regards
Mike Hoyt
Persistence
Halifax, NS
From: Danny Haughey via CnC-List
Sent: July 9, 2021 4:09 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey
Subject: Stus-List Re: Old Harken Roller II
OK so, Steve Mallet wa
kato...@hotmail.com"
Subject: Stus-List Re: Old Harken Roller II
Date: Fri, 9 Jul 2021 16:51:45 + (UTC)
Hi Danny, I have a Harken II Unit 1 Same as Bruno Spare Connectors and a
Foil..would be a great thing to have in the parts department. Cheers Johnny
Wright1970 C&C36RSault
Hi Danny,
I have a Harken II Unit 1
Same as Bruno Spare Connectors and a Foil..would be a great thing to
have in the parts department.
Cheers
Johnny Wright1970 C&C36RSault Ste Marie, Ontario, Canada
On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List
wrote:
Hi Danny I could use an extrusion and connector myself. Mine is also missing
the top bearing. Thanks for putting this out there.
Dave 33-2 - Toronto area
Sent from my iPhone
> On Jul 9, 2021, at 11:19 AM, Danny Haughey via CnC-List
> wrote:
>
>
> HI Guys, I replaced my old harken roller
d, Qc
De : Hoyt, Mike via CnC-List
Envoyé : 9 juillet 2021 11:38
À : 'Stus-List'
Cc : Hoyt, Mike
Objet : Stus-List Re: Old Harken Roller II
Hi Danny
What model furler and do you have pictures? Some of those parts are no loger
made and very difficult to get.
Mike Hoyt
Persi
Hi Danny
What model furler and do you have pictures? Some of those parts are no loger
made and very difficult to get.
Mike Hoyt
Persistence
Halifax, NS
From: Danny Haughey via CnC-List
Sent: July 9, 2021 12:18 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey
Subject: Stus-List Old Harken Roll
19 matches
Mail list logo
