Russ:
I too like to use the appropriate nautical term. When we put the
standing rigging together for the first time after purchasing the boat,
we discovered the top 'aluminum 'through-bolt, 'stud' or 'tie bar' as
the rigger from North Sails called it was approx. half worn through by
the wire
Russ:
No worries mate.no offense taken! I am probably just as punctilious
as you are!
And while you have done a commendable job nudging me back to the
terminology 'through bolt' , I will probably continue to reference this
piece of rigging as a 'tie bar'.
From Merriam Webster's:
A little term bitchin' here.
The threaded thingy that goes inside the mast to hold the tangs tight
is a called through-bolt (even though in most cases it is a stud) not
a tie-bar. And it goes inside a compression tube so it can be
properly tightened without deflecting the mast sides towards e
That’s OK Russ,
We don’t mind. You’re our sweetest old "fuddy duddy” and a very helpful sailor!
See ya in Telegraph Harbor where you can teach me a couple more terms.
Ha, Lee
On May 14, 2015, at 11:01 AM, Russ & Melody via CnC-List
wrote:
>
> A little term bitchin' here.
>
> The thread
I'd be happy if more sailors would simply learn the difference between
"deck", and, "topsides".
Bill Bina.
On 5/14/2015 2:01 PM, Russ & Melody via CnC-List wrote:
A little term bitchin' here.
The threaded thingy that goes inside the mast to hold the tangs tight
is a called through-bolt (
Thanks Russ, I think I represent the "younger" (I have grey!) generation of
sailors on this list and I'm happy to be corrected. Using the right words
for things on a sailboat is pretty important .. especially the "go parts",
and especially when you're underway!
Steve
Suhana, C&C 32
Toronto
On Th
Rob,
I can understand your confusion with a term you are comfortable using
as it was provided by a rigger you trust. My intention is not to
belittle you or anybody else but to point out to everybody when I see
little things start to get outta place. My assumed role is to nudge
them back to go
Russ,
So calling a halyard an "uppy downy" line and a sheet an "inny outy" line
doesn't work? :)
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, May 15, 2015 at 12:12 AM, Russ & Melody via CnC-List <
cnc-list@cnc-list.com> wrote:
> Rob,
>
> I can understand your confusion with a term you ar
I do things and things are done to me ...
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via
CnC-List
Sent: Friday, May 15, 2015 10:14 AM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Rig - crack -> terms
Russ:
No worries mate.no offense taken! I
Dennis,
This made a laugh of the day for me.
Do you have any more of those?
Love this list!
Marek
C320 in Hamilton
On Fri, May 15, 2015 at 8:50 AM, Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Russ,
>
> So calling a halyard an "uppy downy" line and a sheet an "inny outy" line
> does
Yeah, and you have to use the colour it is.
As in, pull the red "inny outy" on the left side.
Cheers, Russ
Sweet 35 mk-1
At 05:50 AM 15/05/2015, you wrote:
Russ,
So calling a halyard an "uppy downy" line and a
sheet an "inny outy" line doesn't work? :)
Dennis C.
Touche'
Don't have any as good as those. They were used by a friend to tell his
wife what to do. She couldn't grasp any nautical terms whatsoever.
One of my favorites was coined by a lister, Wally. One many older C&C's
there is a metal plate on the deck to which a bulkhead bracket is
fastened. Wally c
God forbid you use "red fleck" or "red trace" for the white lines.
Dennis C.
On Fri, May 15, 2015 at 11:24 AM, Russ & Melody via CnC-List <
cnc-list@cnc-list.com> wrote:
>
> Yeah, and you have to use the colour it is.
>
> As in, pull the red "inny outy" on the left side.
>
> Cheers, Russ
Don't forget about the "Parking hook", otherwise known as an anchor.
Doug MountjoysvPegasusLF38 just west of Ballard, WA.
-- Original message--From: Marek Fluder via CnC-ListDate: Fri, May 15,
2015 07:51To: cnc-list@cnc-list.com;Cc: Marek Fluder;Subject:Re: Stus-List Rig
Not I, but I have trimmed a spinny while holding a red line with white tracer.
My spinny inny outty is green with white tracer, both sides. :)
Cheers, Russ
Sweet 35 mk-1
At 09:27 AM 15/05/2015, you wrote:
God forbid you use "red fleck" or "red trace" for the white lines.
Den
15 matches
Mail list logo