: Stus-List Spinnaker pole storage
I want a whisker pole!
--
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Saturday, May 2, 2015 7:37:51 PM
Subject: Stus
a whisker pole!
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Saturday, May 2, 2015 7:37:51 PM
Subject: Stus-List Spinnaker pole storage
We have 2 poles on the boat now, the spinnaker pole and the whisker pole.
The spin pole is stored
-list.com
Date: 05/04/2015 05:14 PM
Subject:Re: Stus-List Spinnaker pole storage
I want a whisker pole!
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Saturday, May 2, 2015 7:37:51 PM
Subject: Stus-List Spinnaker pole storage
We have 2
I want a whisker pole!
- Original Message -
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Saturday, May 2, 2015 7:37:51 PM
Subject: Stus-List Spinnaker pole storage
We have 2 poles on the boat now, the spinnaker pole
On May 4, 2015, at 5:13 PM, Chuck S via CnC-List cnc-list@cnc-list.com
wrote:
I want a whisker pole!
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Saturday, May 2, 2015 7:37:51 PM
Subject: Stus-List Spinnaker pole storage
We have 2 poles
We have 2 poles on the boat now, the spinnaker pole and the whisker pole.
The spin pole is stored as per the original CC design: A half loop built
into the bow pulpit fore and a 3 inch shaft sticking out of a stanchion mount
aft. The forward jaw securely grabs the loop and the aft end
Jim Egloff at 716-525-3228 or email
j...@rcryachts.com
Regards,
Bill Coleman
CC 39
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill
Coleman via CnC-List
Sent: Sunday, April 26, 2015 12:54 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spinnaker pole storage
once, but I was mistaken.
Bill Coleman
CC 39
*From:* Richard Bush [mailto:bushma...@aol.com]
*Sent:* Saturday, April 25, 2015 1:58 PM
*To:* Bill Coleman; cnc-list@cnc-list.com
*Subject:* Re: Stus-List Spinnaker pole storage
Bill, where did you buy pole from and what the overall cost
/2015 5:03 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spinnaker pole storage
Pegasus had the pole deck stowed. I moved it to the rail, aft chock is inside
of stantion, fwd chock os on outside of aft bow pulpit stantion. So far I
have not had an issue wit lines getting
Hi Bill,
How is the pole UV protected... painted? And have you noticed any
effect on the flow across the lower part of the mains'l?
Most of the carbon poles around here are deck stow and have a cloth
covering when not in use.
Cheers, Russ
Sweet 35 mk-1
At 07:48 AM
CnC-List cnc-list@cnc-list.com
Date: 04/24/2015 5:03 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spinnaker pole storage
Pegasus had the pole deck stowed. I moved it to the rail, aft chock is inside
of stantion, fwd chock os on outside of aft bow pulpit stantion. So
:03 PM (GMT-05:00)
To: mailto:cnc-list@cnc-list.comcnc-list@cnc-list.com
Subject: Re: Stus-List Spinnaker pole storage
Pegasus had the pole deck stowed. I moved it to the rail, aft chock
is inside of stantion, fwd chock os on outside of aft bow pulpit
stantion. So far I have not had an issue wit
)
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spinnaker pole storage
Pegasus had the pole deck stowed. I moved it to the rail, aft chock is
inside of stantion, fwd chock os on outside of aft bow pulpit stantion. So far
I have not had an issue wit lines getting tangled.
Doug
My seldom used spin pole is in deck chocks along the starboard rail. Just
something else to trip over.
Has anyone used the rail-mounted chocks? Any other solution (other than
the mast)?
Joel
The Office
Annapolis
___
Email address:
Pegasus had the pole deck stowed. I moved it to the rail, aft chock is
inside of stantion, fwd chock os on outside of aft bow pulpit stantion. So far
I have not had an issue wit lines getting tangled.
Doug MountjoysvPegasusLF38 just west of Ballard, WA.
-- Original
and can become a problem and catch things when docking.
Chuck
Resolute
1990 CC 34R
Broad Creek, Magothy River, Md
- Original Message -
From: Joel Aronson via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Sent: Friday, April 24, 2015 3:34:56 PM
Subject: Stus-List Spinnaker
16 matches
Mail list logo