ther halyard, etc.
randy
Tamanawas29-II
Hood River, OR
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa
Sent: Monday, July 15, 2013 6:09 AMTo: cnc-list@cnc-list.comSubject: Stus-List Ultrafurl - sticking
Hi All. It seems the drum on my ultrafurl is sticking. I know th
of course there’s no wrap from another
> halyard, etc.
>
> ** **
>
> randy
>
> Tamanawas
>
> 29-II
>
> Hood River, OR
>
> ** **
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Stevan
> Plavsa
> *Sent:* M
rom another halyard, etc.
randy
Tamanawas
29-II
Hood River, OR
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan
Plavsa
Sent: Monday, July 15, 2013 6:09 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Ultrafurl - sticking
Hi All.
It seems the drum on my ultra
;Dennis C."
To: "Cn Clist"
Sent: Monday, July 15, 2013 5:15:52 PM
Subject: Re: Stus-List Ultrafurl - sticking
One of the most common problems is the second issue listed below. I think
Harken recommends a minimum divergence angle between forestay and halyard of 7
degrees. If
_
> From: "sam.c.sal...@gmail.com"
>To: cnc-list@cnc-list.com
>Sent: Monday, July 15, 2013 4:18 PM
>Subject: Re: Stus-List Ultrafurl - sticking
>
>
>
>To stop furling lines binding up in the drum, de core the furling line that
>wraps around the drum. Leave the core
From: Martin DeYoungSent: Monday, July 15, 2013 11:20 AMTo: cnc-list@cnc-list.comReply To: cnc-list@cnc-list.comSubject: Re: Stus-List Ultrafurl - sticking
> We
ist.com
>Sent: Monday, July 15, 2013 12:36 PM
>Subject: Re: Stus-List Ultrafurl - sticking
>
>
>Some troubleshooting tips from a Harken manual that may apply to others
>
>Sail will not furl or is difficult to furl.
>Jib halyard is wrapping around headstay because
>angle be
t into the drum assembly and how the forestay is attached. Took it
apart. It's in my truck.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>
> From: "honeys...@aol.com"
>To: cnc-list@cnc-list.com
>Sent: Monday, July 15, 2013 11:31
Some troubleshooting tips from a Harken manual that may apply to others
Sail will not furl or is difficult to furl.
Jib halyard is wrapping around headstay because
angle between mast and and halyard is too shallow
See installation instructions regarding optimal halyard angle. It may be
necessary
15, 2013 9:31 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ultrafurl - sticking
Swt.
In a message dated 7/15/2013 12:20:24 P.M. Eastern Daylight Time,
capt...@yahoo.com<mailto:capt...@yahoo.com> writes:
Coincidence. I'm dropping an old Hood Seafoil 2536 today. Close cou
; 1982 C&C 38 Landfall
> Toronto, Canada
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill
Bina
> Sent: Monday, July 15, 2013 9:20 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Ultrafurl - sticking
>
t-boun...@cnc-list.com] On Behalf Of Bill Bina
> Sent: Monday, July 15, 2013 9:20 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Ultrafurl - sticking
>
> It could be as simple as too much tension on the forestay. If you try and
> furl with your backstay cranked tight, t
nc-list-boun...@cnc-list.com] On Behalf Of Bill Bina
Sent: Monday, July 15, 2013 9:20 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ultrafurl - sticking
It could be as simple as too much tension on the forestay. If you try and
furl with your backstay cranked tight, that can make any furler bind.
River, Mile 584
Richard N. Bush Law Offices
235 South Fifth Street, Fourth Floor
Louisville, Kentucky 40202
502-584-7255
-Original Message-
From: Stevan Plavsa
To: cnc-list
Sent: Mon, Jul 15, 2013 9:08 am
Subject: Stus-List Ultrafurl - sticking
Hi All.
It seems the drum on
Message-
From: Stevan Plavsa
To: cnc-list
Sent: Mon, Jul 15, 2013 9:08 am
Subject: Stus-List Ultrafurl - sticking
Hi All.
It seems the drum on my ultrafurl is sticking. I know that other C&Cs used this
furling gear so I was hoping for some feedback from other ultrafurl owners. I
dropped
It could be as simple as too much tension on the forestay. If you try
and furl with your backstay cranked tight, that can make any furler bind.
Bill Bina
On 7/15/2013 9:08 AM, Stevan Plavsa wrote:
Hi All.
It seems the drum on my ultrafurl is sticking. I know that other C&Cs
used this furlin
Hi All.
It seems the drum on my ultrafurl is sticking. I know that other C&Cs used
this furling gear so I was hoping for some feedback from other ultrafurl
owners. I dropped the swivel down and it is fine so I'm blaming the drum.
It needs a lot of coaxing to turn and it will turn, then come to a s
17 matches
Mail list logo
