dam's a écrit :
[EMAIL PROTECTED] ("Quel Qun") writes:
Found this in the messages log:
Jun 26 10:23:28 erux gdmlogin[818]: Wrong permissions on
/etc/X11/gdm/Sessions//sawmill. Should be readable/executable for all.
Jun 26 10:23:28 erux gdmlogin[818]: Wrong permissions on
On Tue, Jul 04, 2000 at 04:01:00AM +0800, Geoffrey Lee wrote:
let's forward this to cooker and see what everyone thinks, and see who
wins? ;-)
cookers: do you think htat bzip2 should have main and devel splitted up
into separate pacakges, or come in one single package?
In two packages,
Chmouel Boudjnah [EMAIL PROTECTED] writes:
Hi folks,
for now since the gcc2.96 is too unstable and we go back to gcc2.95
for a while, the gcc2.95 package will be reuploaded again, please do :
rpm -U --oldpackage gcc* libstdc++*
(-F should work but not tested ;))
if you have
Alexander Skwar wrote:
What I never quite understood: What are the advantages for a single home
user system? The adv. you listed below are good and all, but what do I get
out of it? I mean, setting up one printer is not actually hard, is it?
Imagine you have an ink jet or a small laser
"bobby dowling" [EMAIL PROTECTED] writes:
So, do you mean that I can just find the tdfx.o module (where?), insmod or
modprobe it amd quake 3 will work the way it is supposed to?
under XF4, yes, if your XF86Config-4 has the DRI line.
modprobe the module, start XFree with appropriate log and
Michael Holt [EMAIL PROTECTED] writes:
Guillaume Cottenceau wrote:
Michael Holt [EMAIL PROTECTED] writes:
Hello cooker,
I'm seeing the latest releases of Mesa and now hearing that XFree 4.01
is out and I still can't get quake3 working even though I've got the
Matrox
"Mike Tracy Holt" [EMAIL PROTECTED] writes:
Hello Guillaume,
O.k., I've printed the userguide that you pointed me to
(http://dri.sourceforge.net/DRIuserguide.html) and as I read through, I'm
starting to see a few problems already.
1) It says that for the Matrox G400 card I should be
Till Kamppeter [EMAIL PROTECTED] writes:
In reality I suggest to include not only my software. The first one is
CUPS (www.cups.org) which is a free (GPL) new printing daemon which
replaces the old LPD which is technology of the '70s. The advantages of
[..]
The additional printer drivers are
Silvestro Franco [EMAIL PROTECTED] writes:
[...]
With or without mouse the problem is the same but when I changed newer
MIRROR/Mandrake-devel/cooker/Mandrake/mdkinst/usr/bin/perl-install/mouse.pm
with an older version ... install worked ok
and we wait for Pixel
Mike Crifassi [EMAIL PROTECTED] writes:
There's a debugging line in the mouse.pm code:
map_index {
my %l; @l{@mouses_fields} = @$_;
$mouses[$::i] = \%l;
} @mouses;
print "$_-{XMOUSETYPE}\n" foreach @mouses;
-
around line 29 or so. If you
There are also a lot of free drivers, in principle one can derive a CUPS
driver from any GS based printer driver for LPD and native PostScript
printers are supported through the PPD file provided by the printer
manufacturer.
For driver generation, download and building instructions check the
Hello Till,
I downloaded CUPS, FLTP and XPP.
After install (with CUPS there is a
dependency pb with
lpr, printtool and rhs-printfilters =
lpr, lprm, and lp...)
Did the install.
Window of xpp came up bute after
clicking on
'options' to select a printer, xpp get
away (stops).
What did I wrong ?
My
With the latest cooker, when I run netscape, i get this error... any
suggestions??
dave
/usr/lib/netscape/netscape-communicator: error in loading shared libraries:
libXpm.so.4: cannot open shared object file: No such file or directory
--
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
Hi,
Just my final report about using the acceleration with a voodoo3 under
XFree4.
First word: it's not quicker than under XFree-3.3.6
. I used the tip provided by [EMAIL PROTECTED] to compile the tdfx
kernel module. (I'll have to see with fredl and chmou with which package
we can provide
mc-4.5.50-1mdk.src.rpm needs ORBit version 0.5.2 to recompile 'cause
orbit-idl incorrectly put double-quotes around libgnorba/gnome-factory.h
I succesfuly hacked ORBit-0.5.1-2mdk.src.rpm substituting ORBit-0.5.1.tar.bz2
with last version taken from
Armisis Aieoln [EMAIL PROTECTED] writes:
With the latest cooker, when I run netscape, i get this error... any
suggestions??
dave
/usr/lib/netscape/netscape-communicator: error in loading shared libraries:
libXpm.so.4: cannot open shared object file: No such file or directory
this one
where/how do we prepend a
LD_PRELOAD=/usr/lib/libglide3x.so.2 to the programs?
Im fighting to get my banshee to work at all with xf4
still fighting on getting the tdfx.o module and getting it installed
dave
On Tue, 04 Jul 2000, you wrote:
Hi,
Just my final report about using
Armisis Aieoln [EMAIL PROTECTED] writes:
where/how do we prepend a
LD_PRELOAD=/usr/lib/libglide3x.so.2 to the programs?
like defining a variable on a commandline:
LD_PRELOAD=/usr/lib/libglide3x.so.2 gears
you can ofcourse perform "export LD_PRELOAD=/usr/lib/libglide3x.so.2" (but
it's a
Diablero [EMAIL PROTECTED] writes:
On Tue, Jul 04, 2000 at 04:01:00AM +0800, Geoffrey Lee wrote:
let's forward this to cooker and see what everyone thinks, and see who
wins? ;-)
cookers: do you think htat bzip2 should have main and devel splitted up
into separate pacakges, or come in
You need the Glide module from the contribs rather than the mainline,
the XFree glide module contains the video driver for the older Voodoo
cards, not the Voodoo3. The Glide stuff in contribs supplys the glide
library for general apps.
John
Guillaume Cottenceau wrote:
Hi,
Just my final
G'day all,
I am having a problem upgrading to the new XFree86 4.01.
Here is the relavant info.
# rpm -Uvh XFree86-server-4.0.1-1mdk.i586.rpm
error: XFree86-server-4.0.1-1mdk.i586.rpm cannot be installed
# rpm -qa | grep XFree
XFree86-libs-3.3.6-14mdk
XFree86-server-common-3.3.6-14mdk
[EMAIL PROTECTED] ("D.Parodi") writes:
mc-4.5.50-1mdk.src.rpm needs ORBit version 0.5.2 to recompile 'cause
orbit-idl incorrectly put double-quotes around libgnorba/gnome-factory.h
I succesfuly hacked ORBit-0.5.1-2mdk.src.rpm substituting ORBit-0.5.1.tar.bz2
with last version taken from
I spent a while trying to figure this out, and I'm stumped.
All src from gnome cvs repos won't configure. Tis a macros problem.
After running ./autogen.sh all the files are deleted(excluding src
sub-dirs). Here's all the fun errors from ./autogen.sh
**Warning**: I am going to run `configure'
David Walluck [EMAIL PROTECTED] writes:
On Sun, 2 Jul 2000, Eugenio Diaz wrote:
Yeah, I know Mandrake is bleeding edge sometimes, but turning on a kernel
option which is experimental and known (at least to me) to be broken is
if we skip everything marked experimental, then no nfs3, no
In two packages, sure. If I don't need the devel, I don't want the
devel. This issue raises a major problem of Mandrake. It's too big by
default. And this wouldn't arrange the problem.
bzip2 requires bzip2-devel!
yes used to i guess , but not any more.
and before it wasn't like that
Here's two patches, one for 75p3 and one for 1.0c16.
The patches are also available from ftp.bitchx.org now(I think, they
weren't there when I first checked).
Anyway, /invite nickname #%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s will cause BitchX
to segfault.
Instructions:
cd BitchX/source
patch
On Tue, Jul 04, 2000 at 10:09:50AM +0200, Till Kamppeter wrote:
Thank you for criticizing my first mail, this lead to me explaining some
things better, so that all list members learn more about
state-of-the-art printing with free software,
Okay, you actually explained it so much better, that
Bryan Paxton [EMAIL PROTECTED] writes:
I did try setting macros="/usr/share/aclocal" that didn't work
also tried exporting ACLOCAL_FLAGS to the same, didn't work.
Any insight to what I'm doing wrong would be appreciated.
sent a mail to [EMAIL PROTECTED] ? or damien can help you ?
--
On Tue, 04 Jul 2000, Chmouel Boudjnah wrote:
Bryan Paxton [EMAIL PROTECTED] writes:
I did try setting macros="/usr/share/aclocal" that didn't work
also tried exporting ACLOCAL_FLAGS to the same, didn't work.
Any insight to what I'm doing wrong would be appreciated.
sent a mail to
Hi!
How do I use rpmdrake? I removed the listings for cdrom[1-4] and added the
an FTP url for cooker to rpmdrake. Next I wanted to install a package
(sag). After a shortwhile an error message popped up, saying: "Fehler beim
holen von sag". (Error while fetching sag). What did I do wrong?
Alexander Skwar [EMAIL PROTECTED] writes:
How do I use rpmdrake? I removed the listings for cdrom[1-4] and added the
an FTP url for cooker to rpmdrake. Next I wanted to install a package
(sag). After a shortwhile an error message popped up, saying: "Fehler beim
holen von sag". (Error
From: Thierry Vignaud [EMAIL PROTECTED]
Subject: [CHRPM] devfsd-1.3.9-2mdk
Date: Tue, 4 Jul 2000 11:15:05 +0200
--=-=-=
* Tue Jul 04 2000 Thierry Vignaud [EMAIL PROTECTED] 1.3.9-2mdk
- automatically load modules when a process lookup a /dev entry (part1)
(part2 is copying richard'
On Tue, 04 Jul 2000, Pixel wrote:
Alexander Skwar [EMAIL PROTECTED] writes:
try "urpmi.update -a" and then installing sag agin.
works nicely for me (i didn't use rpmdrake though, used urpmi directly)
pixel@leia:~ urpmi sag
installing
"Quel Qun" [EMAIL PROTECTED] writes:
From: Thierry Vignaud [EMAIL PROTECTED]
Subject: [CHRPM] devfsd-1.3.9-2mdk
Date: Tue, 4 Jul 2000 11:15:05 +0200
--=-=-=
* Tue Jul 04 2000 Thierry Vignaud [EMAIL PROTECTED] 1.3.9-2mdk
- automatically load modules when a process lookup a /dev entry
Is there a consesus on how to get Mandrake 7.1 + Voodoo3 + Quake3 (or
similar app)?
I have read the last few e-mails and there seems to be some confusion.
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [Cooker]
Bryan Paxton [EMAIL PROTECTED] writes:
urpmi.addmedia free
ftp://ftp.free.fr/pub/Distributions_Linux/Mandrake/7.1/Mandrake/RPMS
should be:
urpmi.addmedia free
ftp://ftp.free.fr/pub/Distributions_Linux/Mandrake/7.1/Mandrake/RPMS with
../base/hdlist.cz2
Bryan Paxton a écrit :
On Tue, 04 Jul 2000, Pixel wrote:
Alexander Skwar [EMAIL PROTECTED] writes:
try "urpmi.update -a" and then installing sag agin.
works nicely for me (i didn't use rpmdrake though, used urpmi directly)
pixel@leia:~ urpmi sag
installing
Chmouel Boudjnah [EMAIL PROTECTED] writes:
From: Thierry Vignaud [EMAIL PROTECTED]
Subject: [CHRPM] devfsd-1.3.9-2mdk
Date: Tue, 4 Jul 2000 11:15:05 +0200
--=-=-=
* Tue Jul 04 2000 Thierry Vignaud [EMAIL PROTECTED] 1.3.9-2mdk
- automatically load modules when a process lookup
I wish that were so, but it's not going ; )
From the CLI or from rpmdrake.
I mean from the CLI exactly how should it be ?
And from rpmdrake, well I really have no control over that(unless I go in and hackle
the src)
On Tue, 04 Jul 2000, you wrote:
Bryan Paxton [EMAIL PROTECTED]
On Tue, 04 Jul 2000, you wrote:
Mike Crifassi [EMAIL PROTECTED] writes:
There's a debugging line in the mouse.pm code:
map_index {
my %l; @l{@mouses_fields} = @$_;
$mouses[$::i] = \%l;
} @mouses;
print "$_-{XMOUSETYPE}\n" foreach @mouses;
Ok ack, I misread this, this works from the CLI but not from rpmdrake
On Tue, 04 Jul 2000, you wrote:
Bryan Paxton [EMAIL PROTECTED] writes:
urpmi.addmedia free
ftp://ftp.free.fr/pub/Distributions_Linux/Mandrake/7.1/Mandrake/RPMS
should be:
urpmi.addmedia free
On Tue, Jul 04, 2000 at 02:40:29PM -0500, Bryan Paxton wrote:
Ok ack, I misread this, this works from the CLI but not from rpmdrake
Nice, I'm not the only one being unable to use rpmdrake. This is another
point that doesn't work with rpmdrake. And the sizes are a "little" bit of,
the sag
Alexander Skwar [EMAIL PROTECTED] writes:
[...]
Ok ack, I misread this, this works from the CLI but not from rpmdrake
Nice, I'm not the only one being unable to use rpmdrake. This is another
point that doesn't work with rpmdrake. And the sizes are a "little" bit of,
the sag package is
--
-
Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik
Mandrakesoft||| e-mail: [EMAIL PROTECTED]
Quality Assurance (@ @)(private: [EMAIL PROTECTED])
For that type of setup, you may need an SSL-capable FTP server. From what
I've read of the sftp that is contained within the Mandrake crypto archives,
it sets up an ssh tunnel, requiring both client and server to have ssh and
the sftp package. Using an SSL-capable FTP server and web browser
Hello,
I've lost my PCMCIA ! This is bad since I use a PCMCIA modem, SCSI card and
Ethernet card :-(
I've installed the kernel 2.2.17-0.5mdk, and kernel-pcmcia-cs 2.2.17-0.5mdk
1st I had to put the enteries back into /etc/sysconfig/pcmcia !
Then on reboot I was informed that there was no
On Tue, Jul 04, 2000 at 08:42:21PM +0200, Pixel wrote:
works nicely for me (i didn't use rpmdrake though, used urpmi directly)
pixel@leia:~ urpmi sag
installing
ftp://sunsite.uio.no/pub/unix/Linux/Mandrake-devel/cooker/Mandrake/RPMS/sag-0.7.0-2mdk.noarch.rpm
Okay, urpmi works here as
Alexander Skwar [EMAIL PROTECTED] writes:
Died at /usr/X11R6/bin/grpmi.pm line 17, F line 12.
try with gurpmi instead of urpmi, does it fails?
(rpmdrake uses gurpmi so it *should* fail)
Ooops,
GVR (Gone Very Red) :-) -- toothy grin.
Typo. in /etc/sysconfig/pcmcia !!!
Sorry !
Owen
Hello,
I don't know what is going on but I keep getting very serious system lockups. I
thought Window$ 98 was bad, but at the moment Linux goes down about once an
hour. There seems to be no rhyme nor reason to this. I've removed hardware,
stopped various boot daemons. The most common thing I can
Hello,
rpm -Uvh lesstif-wmw 0.91.4-1mdk results in the following message.
var/tmp/rpm-tmp.81177: fg: no job control
execution of script failed
Owen
Hi
Gael thinks that forum.mandrakesoft.com name should be replaced by a
shorter one - easier to remember. You can vote for the one which you find
best/easiest to remember/nicest on the "forum":
http://forum.mandrakesoft.com
thx
Denis
--
forum.mdk.com ?
--
+++
Allen Bolderoff [EMAIL PROTECTED]
LNC - Linux, help and commentary http://linux.netnerve.com
CTPC - Caffeine - get it here: http://www.coffee-tea-pots-cups.com/
Hi friends,
I has a little confused ...
[andrew@i18n SPECS]$ rpm -bb XFree86-4.spec
error: failed build dependencies:
Glide_SDK is needed by XFree86-4.0.1-1mdk
[andrew@i18n SPECS]$ rpm -qa|grep Glide
Glide_V3-2.60.15-4mdk
Glide_V3-devel-2.60.15-4mdk
Where can I find the Glide_SDK ??
n Tue, 04 Jul 2000, Rick Jansen wrote:
I don't know whether this is the right place to put it, but i'm going to
anyway :)
Because of a simple /invite nickname #%s%s%s%s%s%s%s%s%s, BitchX will
segfault and coredump. This is a small programming error, you can find a
patch at this location:
On Mon, Jul 03, 2000 at 02:39:42PM +0200, Jan Matis wrote:
I have a small question:
why is the Wu ftp daemonn installed as default ftp daemonn when nearly all
version have some buffer owerflow ?
is there any reason why is't the default ProFtpD or another one ?
Can't tell you why, other
lol... ok, I guess that answers that!
Mike
[EMAIL PROTECTED] wrote:
I'm running 2.4.0-test2-ac2 as my current kernel. I'm not sure where the
hackkernel stands since I've never run the Mandrake kernel longer than
it takes to recompile... :o)
John
Michael Holt wrote:
When you say
On Tue, Jul 04, 2000 at 12:36:35PM +0700, tracer wrote:
maybe an odd question but whats the best version of irc-server
program to run a full sized irc server on an isp (we run redhat and
mandrake servers...)
we have sofar ignored the use of irc except as users...but we are
- Forwarded message from Thomas Roessler [EMAIL PROTECTED] -
Date: Tue, 4 Jul 2000 12:36:01 +0200
From: Thomas Roessler [EMAIL PROTECTED]
Subject: [Announce] urlview-0.9 is out.
To: [EMAIL PROTECTED]
Cc: Olaf Kirch [EMAIL PROTECTED], [EMAIL PROTECTED]
User-Agent: Mutt/1.3.4i
urlview-0.9
[root@walluck /root]# rpm -Uvh kernel-2.2.17-0.6mdk.i586.rpm
kernel-headers-2.2.17-0.6mdk.i586.rpm
kernel ##
cat: invalid option -- c
Try `cat --help' for more information.
cp: 2.2.17-0.6mdk: No such file or directory
And I'll say again: If there
60 matches
Mail list logo
