Yo,
What error message?
Just make sure that you are using the latest soundconfig from cooker
(3mdk) which I patched. It worked for me, on a stock -test8 kernel.
---
couldn't find soundcore.o will be pulling down latest
Synched on sunsite.uio.no 04:30 CEST
/etc/modules is now empty
/etc/modules.conf has no more alias eth0 (time ago was alias eth0 usb-uhci
!?)
than :
traceroute: can't find any network interfaces (during installer I said done
when asked me if I want change network configuration, because for
Synched on sunsite.uio.no 2916 04:30 CEST (also 08:00 ... no news)
If I try "Create new-Application"
Dialog with "Sorry KDesktop" :
The templates file /usr/share/templates/.source/Program.desktop doesn't exist
Same for others "Create new-..."
because /usr/sh
.Obviously also existing desktop links doesn't work;o)
VERSIONS:
kdesupport-1.94-6mdk
kdelibs-1.94-5mdk
kde1-compat-1.1.2-6mdk
kdebase-1.94-8mdk
kdelibs-sound-1.94-5mdk
kdegraphics-1.94-3mdk
kdemultimedia-1.94-3mdk
kdeaddutils-1.94-1mdk
kdesupport-devel-1.94-6mdk
kdelibs-devel-1.94-5mdk
This is an update to the rsync script in the parent of this message.
You are referred to the parent and grandparent messages for further
explanation.
Using this script, total 7.2beta tree download is now 971MB, a
considerable saving from a complete download and from the combined
size of the two
Hi,
I'd like to go ahead and fix some perl packages. Those listed in:
http://d10179.dtk.chello.nl/build/cooker/alpha/perl5/ and
http://d10179.dtk.chello.nl/build/cooker/i586/perl5/
These packages get their %files information out of a filelist that it
generates itself. Later in the proces
Stefan van der Eijk [EMAIL PROTECTED] writes:
Problem solved I guess... ;-) Apache (one of the packages affected) just
succesfuly compiled on my alpha!
ok, good news :)
Stefan van der Eijk [EMAIL PROTECTED] writes:
I'd like to replace the filelist generation by a "normal" filelist. Is
this OK with mandrake, or is this a waste of my time?
in any case, if a filelist can be removed without enumerating all the files,
it's a good thing of course.
Pedro Rosa [EMAIL PROTECTED] writes:
/bin/sh: egcs-version: command not found
install egcs
robert a écrit :
what are the correct permissions for /dev/dsp?
XMMS works fine when I run as root, but when I run XMMS as a user I get an
error message about permissions denying access to /dev/dsp
I had the same problem, reported it some time ago. I keep synchronized
to cooker, and
On 17th build glide_driver.c points to glide.h. However, glide
includes are usually present on /usr/include/glide. To build this
package it is needed to move all *.h files to /usr/include (or correct
the #include entries on 8-9 files). This is bad because there is also a
series of *.h files for
I'd like to replace the filelist generation by a "normal" filelist. Is
this OK with mandrake, or is this a waste of my time?
in any case, if a filelist can be removed without enumerating all the files,
it's a good thing of course.
Even better: How about adding a " grep -v packlist | grep
Stefan van der Eijk [EMAIL PROTECTED] writes:
I'd like to replace the filelist generation by a "normal" filelist. Is
this OK with mandrake, or is this a waste of my time?
in any case, if a filelist can be removed without enumerating all the files,
it's a good thing of course.
Even
I'd like to replace the filelist generation by a "normal" filelist. Is
this OK with mandrake, or is this a waste of my time?
in any case, if a filelist can be removed without enumerating all the files,
it's a good thing of course.
Even better: How about adding a " grep -v
Stefan van der Eijk [EMAIL PROTECTED] writes:
[...]
yeah, quite nice, even though i prefer calling spec-helper directly before
making the filelist...
Could you give me an example on how to do that I'll take care of the
rest of the packages...
see perl.spec
Ron Stodden wrote:
Warren Doney wrote:
Now in about 40 hours from now I will be able to tell you if it worked
O.K...
Oh dear, why do it the hard way?
Use rsync (man rsync). You can stop and resume it as much as you
like with no waste.
If you are only interested in an
why don´t you also exclude the language-files from netscape and stuff like FreeWnn.
You can also safe a lot by only download one of the things that are dubble like
XFree3.3/XFree4
Apache/roxen
Wuftp/proftp
Warren,
ftp.free.fr does not run an rsync server, so you can't use it with my
rsync script. Both primary Mandrake mirrors ftp.sunet.se and
sunsite.uio.no do run rsync servers, as does mirror.aarnet.edu.au
here in Brisbane which may be your fastest server (it services my
cable modem here in
andre wrote:
why don´t you also exclude the language-files from netscape and stuff like FreeWnn.
You can also safe a lot by only download one of the things that are dubble like
XFree3.3/XFree4
Apache/roxen
Wuftp/proftp
Pleased to! I have added the netscape langage exclusions (a further
"B. K. Barley" [EMAIL PROTECTED] writes:
The scsi bus does not appear to show.
Here are the files you asked for:
Modules.conf
alias net-pf-4 ipx
alias char-major-107 3dfx
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias
I just read www.lwn.net and I saw that conectiva.com hast just started to
hack apt-get for working with RPM. I use a lot urpmi and apt-get on a
Debian system and a mix of two will be the top. I also see that Yellow Dog
has created the same tool in Python.
Maybe it would be cool if Mandrakesoft,
Downloaded on 91500
Everything works except for message
at initialization?
Gtk-CRITICAL **: file gtkitemfactory.c: line 608
(gtk_item_factory_from_path): assertion `path != NULL' failed.
Gimp-WARNING **: entry refers to unknown item factory: "(null)"
Is this something I should track down?
1. I still have problems with adding icons to desktop. I get message
/usr/share/templates/.source/Program.desktop doesn't exist.
2. Kdemultimedia-1.94-3mdk.i586.rpm requires qt?
3. Kpackage can't load rpm packages. It simply dissapears. It can
uninstall, but not install.
4. Kiconedit dissapers
* USB seems to work with kernel-2.2.17-5mdk (in fact serial USB, despite
I lose synchro of my visor handspring during backups, but that is my
problem).
* bttv : with kwintv, I get sound but no image. Is there any special
option with XFree 4 for kwintv to be able to run ? I tried xawtv -nodga,
William H Bouterse a écrit :
Downloaded on 91500
Everything works except for message
at initialization?
Gtk-CRITICAL **: file gtkitemfactory.c: line 608
(gtk_item_factory_from_path): assertion `path != NULL' failed.
Gimp-WARNING **: entry refers to unknown item factory: "(null)"
Is
Hi GC and Pixel,
First for Pixel:
The Bootdisk from yesterday works great at the DC395 controller
Great Job.
Secondly for GC:
As you can see only the non-expert mode works. So You have
to investigate in that ;-)
To both of you:
I have done several tests and found some bugs / small thingy's
I have a problem during the installation of LM 7.2 beta.
After choosing my mouse in expert mode (it's an IntelliMouse PS/2), the mouse
hangs.
I have already posted this here some time ago. It works if you scoll your wheel.
So that's OK.
But what if a user doesn't know this?
What about:
- Fixing
When installing Mandrake in expert mode and choosing single packages, the
installer reports sizes in wrong units:
It says a package is about xxx Megabytes instead of xxx Kilobytes.
I had reported this one week ago (before Beta 2), but it doesn't seem to be
fixed.
Perhaps this is only in German
I have a problem with a computer that has a 20 GB IDE harddisk.
The problem is that Diskdrake doesn't recognize it's partitions. I know this
has to do with a limit at about 7.8 GB if I remember right...
no such limit under linux. Can you give the error message *and* the partition
table?
As described above.
When I install Mandrake and want to choose single packages, I always have to
choose my own list.
What about an option to save this list to disk and to read the back in a later
installation?
This is not the same like the Auto-Install-Disk. It's just the package-list.
Anybody who wants to add
My System is like the following:
AMD K6-2/500 , 128 MB Ram, IDE Harddrive with Win95 Partition
and 2,7 Gig free for Linux (Behind 1024Cyl edge).
A Tekram DC395 PCI SCSI Controller with a Yamaha CDRW (ID2)
and a Plextor 40TSI (ID3).
I used the Mandrake 7.2beta 2 CD's plus the CDROM.IMG from
These are some bugs that I have seen while installing Mandrake 7.2 beta 2:
- My Matrox Produktiva 8MB isn't recognized by the setup program. After
selecting it from the list, it works. 7.1 recognized it well...
- I see that inetd is still selected as the standard (I think it should be
xinetd ?)
- There isn't source package for 0.37b4.1-2mdk rpm available on mirrors,
only for 0.36-3mdk rpm.
- 0.37b7.1 is the current version (but not for xmess)
- there isn't joystick support compiled in, so you have to rebuild it
for using one.
--
Guillaume Rousse
Iremia - Université de la Réunion
Plus
Pascal Grossé [EMAIL PROTECTED] writes:
[...]
- the individual package selection problems i encountered in beta2
seems to have vanished, but the whole thing is still not perfect. When the
windows pops-up, i must sometimes click many times on the ok button in
order to continue. Maybe there
Michael Stucki [EMAIL PROTECTED] writes:
Perhaps this is only in German installation mode, I didn't test the english
yep, was an error in de.po, fixed now. thanks, and thanks for insisting :)
cu Pixel.
[EMAIL PROTECTED] writes:
Anyone know why the cooker install can't identify the
Linksys 10/100 pcmcia network adaptor? It's an ne2000
clone.
is that with latest pcmcia.img? can you write what is said on console 3 5 ?
Michael Stucki [EMAIL PROTECTED] writes:
These are some bugs that I have seen while installing Mandrake 7.2 beta 2:
- My Matrox Produktiva 8MB isn't recognized by the setup program. After
selecting it from the list, it works. 7.1 recognized it well...
quite strange :-/
Please give the
Michael Stucki [EMAIL PROTECTED] writes:
As described above.
mail me the /root/ddebug.log please :)
Michael Stucki [EMAIL PROTECTED] writes:
After choosing my mouse in expert mode (it's an IntelliMouse PS/2), the mouse
hangs.
[...]
- Fixing the problem (so that scrolling isn't required anymore)
don't know how to do that, sorry.
- Giving an alert that the mouse could hang and what to do
Michael Stucki [EMAIL PROTECTED] writes:
[...]
I don't know why, but in Beta 1 it didn't work.
Now it works !
i like this :)
Hi
I just can't make CUPS print to a few smb printers. I use KUPS to configure,
everything stops at the processing stage. I idea?
SHadowX
Just Updated the answered Issues.
My System is like the following:
AMD K6-2/500 , 128 MB Ram, IDE Harddrive with Win95 Partition
and 2,7 Gig free for Linux (Behind 1024Cyl edge).
A Tekram DC395 PCI SCSI Controller with a Yamaha CDRW (ID2)
and a Plextor 40TSI (ID3).
I used the Mandrake
Pixel wrote:
Pedro Rosa [EMAIL PROTECTED] writes:
/bin/sh: egcs-version: command not found
install egcs
:(
No, egcs 1.1.2 is not on my taste. It is worse than forcing me to
install Windows on my comp (br...) or eating letter soup (yuck!). In
fact egcs reminds me letter soup with
On Sat, 16 Sep 2000, Guillaume Cottenceau wrote:
Peter Ruskin [EMAIL PROTECTED] writes:
On Fri, 15 Sep 2000, Guillaume Cottenceau wrote:
Peter Ruskin [EMAIL PROTECTED] writes:
Won't work on my Matrox G400. lspci follows
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX
Pedro Rosa [EMAIL PROTECTED] writes:
/bin/sh: egcs-version: command not found
install egcs
:(
No, egcs 1.1.2 is not on my taste. It is worse than forcing me to
install Windows on my comp (br...) or eating letter soup (yuck!). In
fact egcs reminds me letter soup with 11's only.
On Sat Sep 16, 2000 at 09:22:42AM -0400, [EMAIL PROTECTED] wrote:
Anyone know why the cooker install can't identify the
Linksys 10/100 pcmcia network adaptor? It's an ne2000
clone.
Are you sure? On my laptop, it uses the tulip driver... Is this the
linksys etherfast pcmcia 10/100 card?
--
Thomas Poindessous [EMAIL PROTECTED] writes:
I just read www.lwn.net and I saw that conectiva.com hast just started to
hack apt-get for working with RPM. I use a lot urpmi and apt-get on a
Debian system and a mix of two will be the top. I also see that Yellow Dog
has created the same tool in
Ok. I have installed Cooker (16/09 at 01h) and 7.2beta (16/09 at 16h) from
ftp.
For cooker:
* no help. I think it's normal (in 7.2b there is)
* translation is not finished (already reported)
* I got a error for proxy. I set it to 10.225.7.3 and it asked me to prefix
it with http://. It's a
To my knowledge fredl builds Xfree with Glide*devel stuff, no more no
less..
? I didn't get your point. Are you remarking 3Dfx's Glide rpms? There
they usually install their stuff into /usr/local/glide/include. You
usually use /usr/include/glide, which is much more correct for your
Thomas Poindessous [EMAIL PROTECTED] writes:
[...]
* no help. I think it's normal (in 7.2b there is)
fixed now
* translation is not finished (already reported)
?? contact the translator
* I got a error for proxy. I set it to 10.225.7.3 and it asked me to prefix
it with http://. It's a
Thomas Poindessous a écrit :
Ok. I have installed Cooker (16/09 at 01h) and 7.2beta (16/09 at 16h) from
ftp.
For cooker:
* no help. I think it's normal (in 7.2b there is)
* translation is not finished (already reported)
* I got a error for proxy. I set it to 10.225.7.3 and it asked me
Pixel [EMAIL PROTECTED] writes:
have a ftp proxy with Squid but I can't set it because it asked it
beginning with ftp://. And when I want to correct these errors I got a:
can't call method "grab_focus" on an undefined calue.
trying to reproduce
ok, found the bug. fixed.
[...]
* for
Michael Stucki [EMAIL PROTECTED] writes:
When I install Mandrake and want to choose single packages, I always have to
choose my own list. What about an option to save this list to disk and to read
the back in a later installation? This is not the same like the
Auto-Install-Disk. It's just
Pixel wrote:
Pedro Rosa [EMAIL PROTECTED] writes:
/bin/sh: egcs-version: command not found
install egcs
:(
No, egcs 1.1.2 is not on my taste. It is worse than forcing me to
install Windows on my comp (br...) or eating letter soup (yuck!). In
fact egcs reminds me letter
When cooker has an error mounting some of the filesystems chosen in
diskdrake, an error is returned, and diskdrake comes back up with all of
the directories chosen for mounting blanked out. This is fine behavior,
however the parition that was formerly set as / is depicted as having no
mount
After selecting all packages (using the default packages at 100%) for a
development install in Expert mode, immediately after the screen for the
first package comes up (with the two progress bars) an error message
comes up:
packageFile: missing header
Then we're back at package selection, and
Clicking on the Z button (toggle flat mode) in expert install for a
development workstation causes the following error:
error:Died
S/MIME Cryptographic Signature
Could you give me an example on how to do that I'll take care of the
rest of the packages...
see perl.spec
OK, that worked, the only exception was postgresql, that .spec file is
too complex to let spec-helper run before making the filelist. Since
.packlist was being removed by a find
Hal Black [EMAIL PROTECTED] writes:
After selecting all packages (using the default packages at 100%) for a
development install in Expert mode, immediately after the screen for the
first package comes up (with the two progress bars) an error message
comes up:
packageFile: missing header
it
Hal Black [EMAIL PROTECTED] writes:
Clicking on the Z button (toggle flat mode) in expert install for a
development workstation causes the following error:
error:Died
what install? cooker?
it works here...
Pixel wrote:
Hal Black [EMAIL PROTECTED] writes:
Clicking on the Z button (toggle flat mode) in expert install for a
development workstation causes the following error:
error:Died
what install? cooker?
it works here...
7.2beta from rpmfind.net. I will try to mirror the
Yep, the paths have changed. The latest sndconfig will detect for both
paths i.e. if(!exist(path1) || !exist(path2)) return 1; else return 0;
-
nice try but no joy downloaded the cooker copy of soundconfig
055.3mdk and it still does not
I made it nearly through the installation of 7.2 beta 2 but couldn't
type in the root password. Then I realized that my HP-Pavilion
9680C USB keyboard wasn't recognized. I was able to plug in a
non-usb keyboard I had lying around and it worked, so I completed
the installation.
When I booted
Tim Wegner [EMAIL PROTECTED] writes:
I made it nearly through the installation of 7.2 beta 2 but couldn't
type in the root password. Then I realized that my HP-Pavilion
9680C USB keyboard wasn't recognized. I was able to plug in a
non-usb keyboard I had lying around and it worked, so I
Pixel [EMAIL PROTECTED] writes:
[...]
i'm currently trying conectiva's apt, but can't get it to do anything.
i'm also trying to download it, but their server is dead slow and i can't find
any mirrors :-(
lftp ftp.conectiva.com:/pub/conectiva/iso get cl59-1-2912.iso
Is anyone having problems ?
I wasn't untill 2 hours ago.. I did a reboot and now I can't obtain an ip
via dhcpd in 2.4.x
I normally wouldn't come to this list asking, but the only thing i can think
of is that I upgraded a bunch of packages yesterday rebooted a couple of
hours today and
- the individual package selection problems i encountered in beta2
seems to have vanished, but the whole thing is still not perfect. When the
windows pops-up, i must sometimes click many times on the ok button in
order to continue. Maybe there is an incremental check of dependencies,
Pascal Grossé [EMAIL PROTECTED] writes:
first time i ever saw such a behaviour in expert mode. To explain it
simply : sometimes when the popup window showing incomplete dependencies
appeared, i had to click more than one time on the ok button to
continue. The first time, the packages where
Hi Pixel Pedro!
On Sat, Sep 16, 2000 at 09:57:48PM +0400, Pedro Rosa wrote:
Pixel wrote:
Pedro Rosa [EMAIL PROTECTED] writes:
/bin/sh: egcs-version: command not found
install egcs
:(
No, egcs 1.1.2 is not on my taste. It is worse than forcing me to
install Windows on my
Hey List,
I am running beta 1 and was wondering why my printer dont work..
It says it's there and all if i go under hardware drake it sets up fine but
when i try to print something it just f..king sits there oh its a cheap ho
610.
thanks,
Ralph
--
WHEREVER YOUR HEAD GOES YOUR ASS WILL
I have little time next week and I want to try the new beta. I rsync
7.2beta and cooker every day. Which must I choose for testing ?
--
Thomas Poindessous
EpX asso GNU/Linux de l'Epita
[EMAIL PROTECTED] http://www.epita.fr/~epx
Everyone take a bow. I just installed 7.2Beta . . . everything installed
perfectly and now works perfectly.
There is only one small problem. On my KDE desktop none of the links
work (ie for the cdrom, netscape, zip, etc.).
Keep up the good work!
--
****
Nick Webb
[EMAIL
The machine is a dual-Celleron with a Voodoo3 3000 card.
No machine hangups, crashes or alike. Only a strange "freeze" appears
sometimes in a virtual console. However it vanishes after returning to X
and back.
On 3D. With the exception of the "glitch" on the location of Glide's
headers,
I don't know if this has been reported yet...
The install auto config for ide cd-r or cd-rw has an incorrect link.
/dev/cdrom -- /dev/scd1
should be
/dev/cdrom -- /dev/scd0
Thanks,
Legg
Several machines where I allowed diskdrake in Mdk 7.1 to do the default
partition are now becoming problematic as the undersized usr partitions
are rapidly filling up.
Is there an easy and reliable solution to this dilemma? Do programs such
as Gnu Parted allow me to join two partitions into a
Pascal Grossé wrote:
- when i launched xfree 4.01 after the successfull install, the screen
went to 1600x1200, but i asked 1024x768. I looked at the configuration
file, and the preffered resolution for all bit levels were 1600x1200,
except for 32bits. But the default bit level was set to
Pascal Gross=E9 wrote:
=20
- when i launched xfree 4.01 after the successfull install, the screen
went to 1600x1200, but i asked 1024x768. I looked at the configuration
file, and the preffered resolution for all bit levels were 1600x1200,
except for 32bits. But the default bit level
That makes sense. The installer picks the wrong ftp daemon to go with
anonftp.
Rob
On Fri Sep 15, 2000 at 09:15:50AM -0700, Robert Haddon wrote:
Proftpd is a package dependency of anonftpd. So good idea or not, you
have no choice.
Then this is really wrong... proftpd should depend
Trying to add a remote LPD printer after selecting CUPS during the
7.2 beta install will result in a blank printer selection list. This
causes the printer installation to fail.
Rob
Program: Xig's Accelerated X server for desktops (AX)
Version: 5.03 (latest)
Details:
I could not get Gnome, sawmill, KDE, or enlightenment to work with AccelX
on 7.2 beta. I got an error message about an unresolved dependency in
ICEsocket. (sorry, I don't have the exact message in front of
Steve Fox wrote:
I'd like to request that Lesstif be upgraded to version 0.91.8 as there
were some pretty major enhancements.
From the changelog:
"This release fixes several bugs in the libraries, including critical
ones
(i.e., those which could trigger a program crash), removes
Yo,
X-Sequence: 2862
Precedence: list
List-Help: mailto:[EMAIL PROTECTED]?subject=help
List-Subscribe: mailto:[EMAIL PROTECTED]?subject=subscribe%20cooker
List-Unsubscribe: mailto:[EMAIL PROTECTED]?subject=unsubscribe%20cooker
List-Post: mailto:[EMAIL PROTECTED]
List-Owner: mailto:[EMAIL
Yo,
That makes sense. The installer picks the wrong ftp daemon to go with
anonftp.
Ahh, not my problem then. :)
Pixel...? wu-ftpd should go with anonftp while proftpd is standalone.
--
Geoff
Hal Black wrote:
Pixel wrote:
Hal Black [EMAIL PROTECTED] writes:
Clicking on the Z button (toggle flat mode) in expert install for a
development workstation causes the following error:
error:Died
what install? cooker?
it works here...
7.2beta from rpmfind.net. I
Thomas Poindessous wrote:
ftp.free.fr have a rsync server. In fact, it's called rsync.proxad.net.
Yes, thanks, indeed they do.
For Mandrake, they offer rsync modules:
mandrake-devel (note the small m, and that the new contrib tree is
entirely missing from this rsync module, and that the
I just installed beta 2 and am very disappointed. I had the following
problems. I tried both an upgrade from 7.1 and a new install.
The upgrade failed because it could not read the partition table created by
Mandrake 7.1
The KDE is unusable.. I have been running the betas that were installed
Hal Black wrote:
Hal Black wrote:
Pixel wrote:
Hal Black [EMAIL PROTECTED] writes:
Clicking on the Z button (toggle flat mode) in expert install for a
development workstation causes the following error:
error:Died
what install? cooker?
it works
Great stuff. It now works again !
Thanks,
Owen
On Sat, 16 Sep 2000, you wrote:
OS a écrit :
Hello,
For some reason the auto mounting of the CD and floppy has stopped functioning.
I have run through the man pages etc relevant to automounting, but I have not
been able to get it
Hello,
Could some one tell me how to get audio CD's to auto play ? I've seen Red Hat
6.2 systems do this and I have the player that was being used.
Thanks,
Owen
Hello,
For some reason the auto mounting of the CD and floppy has stopped functioning.
I have run through the man pages etc relevant to automounting, but I have not
been able to get it working.
Would some kind person give me a step by step guide to the programs, settings,
.rc files etc. that I
Is there a bug report list specific to cooker? I've looked but
if it exists haven't been able to find it.
tx, Jim Snyder
[EMAIL PROTECTED]
Anyone know why the cooker install can't identify the
Linksys 10/100 pcmcia network adaptor? It's an ne2000
clone.
This is with beta1 *and* beta2 *and* with the beta1
system. I was able to get it to go under beta1 system
only by rebuilding the kernel and pcmcia and modifying
/etc/conf.modules.
OS a écrit :
Hello,
For some reason the auto mounting of the CD and floppy has stopped functioning.
I have run through the man pages etc relevant to automounting, but I have not
been able to get it working.
Would some kind person give me a step by step guide to the programs, settings,
95 matches
Mail list logo
