Thanks. Seeing that mention of the Z80 was so funny it just made my
day.
On 10 Apr 2001 17:15:18 +0200, Gwenole Beauchesne wrote:
> [Contrib-RPM]
>
> --=-=-=
> Name: cxmonRelocations: (not relocateable)
> Version : 3.0 Vendor: Ma
[claudio@monster claudio]$ scanimage -L
device `v4l:/dev/video0' is a V4L BT878(Hauppauge new (bt878)) virtual device
device `v4l:/dev/bttv0' is a V4L BT878(Hauppauge new (bt878)) virtual device
device `mustek:/dev/sgc' is a Mustek ScanExpress 12000SP Plus flatbed scanner
but when I start xsane o
Hello,
Just installed cooker. Raid is ok, all is almost ok now. Just a curious
thing: when I choose to disable supermount during install process ("setup
filesystem" step) it says "DIED". But now, fstab is correct and everything is
ok: SUPERMOUNT HAS GONE!!! YEAHHH!!!;o))
Ehmm... by the way
I have already rebuilt the kernel so I can't help you,
unfortunately.
--- Chmouel Boudjnah <[EMAIL PROTECTED]> wrote:
> SI Reasoning <[EMAIL PROTECTED]> writes:
>
> > The most recent kernel is missing
> > initrd-2.4.3-12mdk.img. This prevents lilo from
> > setting the kernel. Pity the fool who r
> First off in the slides that run during the package installation, The
> wording needs to change.
> "Thanks to have chosen Linux-Mandrake" Just doen't sound right. how
> about "Thank you for chosing Linux-Mandrake" or something along those
> lines.
That should be...
"Thank you for choosi
regarding my last, I have server-common and svga left over from 3.3.6.
The cooker install tried 336 but the 403 were upgraded by the drake.
Detected as being newer and installed.
On 09 Apr 2001 14:11:07 +0200, Sebastian Dransfeld wrote:
>
> Why does XFdrake want to use XF 3.3.6 with thsi card? X
Hi again!
I saw that installer correctly detect my two swap partitions and ask me to
format them, but at the end of installation fstab just report 1 of them, that
one on /dev/hda1. Other is on /dev/hdc1.
Claudio
--
Linux Mandrake (8.0rc1) System
Kernel 2.4.3 - 256 MB RAM
RAID 0 and 1
A followup with some more information and problems:
Randy Kramer wrote:
> I just tried to install 8.0 beta 3 for the first time.
>
> (System is a Matsonic 8308 with on-board video, sound, ethernet, 700
> MHz Duron, 192 MB Ram. On board ethernet is disabled to use a 10 mbit
> Coax ethernet (Re
Was that where it wasn't launching right the x clan app?
On 09 Apr 2001 18:00:50 +0200, Frederic Crozat wrote:
> --=-=-=
> Name: clanbomber Relocations: (not relocateable)
> Version : 1.01 Vendor: MandrakeSoft
> Release : 12mdk
Danke. You seem to help my issues a lot lately. Have yet to try out
the recompiled mozilla,galeon,nautilus.
On 09 Apr 2001 16:00:18 +0200, Frederic Crozat wrote:
> --=-=-=
> Name: gnome-core Relocations: (not relocateable)
> Version : 1.4.0.1
Installed a yamaha lightspeed (eide). cdrecord say where your scsi?
Blue say huh? Blue try to figure out the whole scsi emulation thing.
Much trouble to find a simple solution. Read linux gazette articles
from September 2000. There was nothing to configure in harddrake, I
don't think it detect
Did u change the thresh hold and stuff? I don't really want an answer,
just a reminder.
On 09 Apr 2001 21:05:02 -0400, Greg Sarsons wrote:
> Is there any way I can get more acceleration out a mouse in Gnome? In
> KDE I can set my acceleration to 14 out 20 and it is too my liking. But
> with Gn
What is using your cd burner (I assume that is hdc)? Is it mounted? A
program using it for something related
(cache,temp,mount,access,whatever) in /usr/{insert rest of path here}?
On 09 Apr 2001 07:45:31 -0400, Bruce F. Press wrote:
> Blue Lizard wrote:
> >
> > When in init 1, what happen?
> >
Support...used automatically after install or once the admin tells it
to?
On 09 Apr 2001 18:01:12 +0200, Chmouel Boudjnah wrote:
> --=-=-=
> Name: initscripts Relocations: (not relocateable)
> Version : 5.82 Vendor: MandrakeSoft
> Release
Only two actual bugs found:
1)
When selecting partition sizes (expert mode),
the numbers typed in to the "size" edit box can be ignored. Rather odd,
but this is what happens:
If you type a number into the box, it is ignored (the partition will be
created with whatever size the dialog defaulted
On Tue, 10 Apr 2001, Mike Perry wrote:
> Damm things still crippled!
>
> from their (Matrox) own readme.txt:
>
> This driver is based on the open source development being done within the
> XFree86 Project. The driver remains unmodified, with the exception of the
> HAL module, which is a closed
On Tuesday 10 April 2001 12:18, Vadim Plessky wrote:
> On Tuesday 10 April 2001 12:25, Mike Perry wrote:
> | Damm things still crippled!
> |
> | from their (Matrox) own readme.txt:
> |
> | This driver is based on the open source development being done within
> | the XFree86 Project. The driv
Wanted to let you know..
gtk+-devel and gettext should be added to the spec as
BuildRequires. Wouldn't build on my machine without
them.
Don Head
SAIR LCA, CIW-P, Network+, A+
Systems Administrator [ [EMAIL PROTECTED] ]
Web Designer[ 1 314 997-7847 ]
[ AIM - D
On Wed, 11 Apr 2001, Eric MC DECLERCK wrote:
> Hi Lepied,
>
> I'm tryng to rebuild menu-2.1.5-42 bcause of a constantly 'segmentation
> fault'
> on a postrun when install a package. And update-menus segmentation fault
> also.
>
> I'm sorry, but what compiler are you using to compile
> a 'const ch
> what is the purpose of
> apache-source-1.3.19-2mdk.i586.rpm under RPMS/ and as
> "i586" ..?
>
> what about SRPM ..?
>
> or did I get something wrong here ..?
Just looks like you missed a few changelog entries:
> Name: apache
> Version : 1.3.19
> Release : 1mdk
>
> - Re-put m
I also have an Aurora problem. During startup it's fine, but I only get the
old text shutdown.
Owen
On Monday 09 April 2001 9:44 pm, you wrote:
> I am having a real weird time using aurora, both in the boot process and in
> the shutdown. Booting, it tells me it can't open aurora, then after a
Hi Lepied,
I'm tryng to rebuild menu-2.1.5-42 bcause of a constantly 'segmentation
fault'
on a postrun when install a package. And update-menus segmentation fault
also.
I'm sorry, but what compiler are you using to compile
a 'const char**' to convert to 'char**' ?? on update-menus.cc ??
Or is i
Why is 8.0 going to be released on only 2 CD's, whereas Cooker has 3 CD's?
What's missing from the soon-to-be-final release?
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
Whenever I try to use rpmdrake or urpmi, I get the following
cryptic mesage:
unable to determine rpms cache directory /var/cache/urpmi/rpms
unable to get source packages, aborting at /usr/bin/urpmq line 153.
/var/cache/urpmi/rpms exists and is writable
begin:vcard
n:Press;Bruce
tel;fax:410-715
Hi,
installation images has errors in text, like "Konquror",
"palce" (place).
R.V.
Stefan Siegel <[EMAIL PROTECTED]> writes:
> Neulich schrieb Daouda LO:
> >
> > --=-=-=
> > Name: DrakConf Relocations: (not relocateable)
> > Version : 0.61 Vendor: MandrakeSoft
> > Release : 36mdk Build Dat
Neulich schrieb Daouda LO:
>
> --=-=-=
> Name: DrakConf Relocations: (not relocateable)
> Version : 0.61 Vendor: MandrakeSoft
> Release : 36mdk Build Date: Tue Apr 10 14:13:04 2001
> Install date: (not instal
I can not compile a 2.4.3 kernel to support high memory.
I have tried all different configurations but the modules will never load on
boot.
2.4.2 is ok I compiled from beta 3 again today and it is ok if I don't load
the mdk config file first.
Can someone please compile a high mem kernel and may
This problem went away for a while and is now back with the latest cooker
bits.
Dave
-- Forwarded Message --
Subject: Cron /usr/sbin/fwctl dump-acct
Date: Tue, 10 Apr 2001 19:45:04 +0100
From: [EMAIL PROTECTED] (Cron Daemon)
To: [EMAIL PROTECTED]
Can't locate IPChains.pm i
Jason Straight <[EMAIL PROTECTED]> writes:
> Just ran thru the updates and now I have no menu's for kde.
> I don't know if it was the menu update or the kde update that broke it.
the kde update . 4mdk fixes this .
Andrej Borsenkow <[EMAIL PROTECTED]> writes:
> On 10 Apr 2001, Chmouel Boudjnah wrote:
>
> >
> > for user applications /lib/mod*/*/build is for drivers
> >
>
> Why additional indirection and not simply /usr/src/linux-`uname -r`?
to have the release also..
--
MandrakeSoft Inc
update.
I can do a install if I use the network.img-2.2.17-BOOT8 to do the install
it installs to the raid drive just fine and boots to the 2.4.3 kernel ok.
hope that helps. I do get a gl1280 module that can't load during the install
but it all seems to work.
On Friday 06 April 2001 14:25, you w
Hi,
what is the purpose of apache-source-1.3.19-2mdk.i586.rpm under RPMS/
and as "i586" ..?
what about SRPM ..?
or did I get something wrong here ..?
Christian
--
Things that make you go "Hmmm":
"If a train station is where the train stops, what is a workstation?"
Just ran thru the updates and now I have no menu's for kde.
I don't know if it was the menu update or the kde update that broke it.
--
Jason Straight
Fresh install gives same results...
On Tuesday 10 April 2001 18:11, you wrote:
> Just ran thru the updates and now I have no menu's for kde.
> I don't know if it was the menu update or the kde update that broke it.
--
Ray
SI Reasoning <[EMAIL PROTECTED]> writes:
> The most recent kernel is missing
> initrd-2.4.3-12mdk.img. This prevents lilo from
> setting the kernel. Pity the fool who reboots his computer!
??? it should be regenerated what do you have when you launch
/usr/share/loader/make-initrd ?
--
Mandrake
"Bruce F. Press" <[EMAIL PROTECTED]> writes:
> Paul Giordano wrote:
> >
> > try:
> >
> > rm -f /var/cache/urpmi/rpms/.listing
>
> Right on the money!
Yes but this is my fault; please use 31mdk for that...
François.
The most recent kernel is missing
initrd-2.4.3-12mdk.img. This prevents lilo from
setting the kernel. Pity the fool who reboots his computer!
=
SI Reasoning
[EMAIL PROTECTED]
gnupg/pgp key id 035213BC
__
Do You Yahoo!?
Get email at your own dom
On 10 Apr 2001, Chmouel Boudjnah wrote:
>
> for user applications /lib/mod*/*/build is for drivers
>
Why additional indirection and not simply /usr/src/linux-`uname -r`?
-andrej
Many,many thanx ;))
---
Spence
Warly wrote:
>
> [Contrib-RPM]
>
> --=-=-=
> Name: cdrecord Relocations: (not relocateable)
> Version : 1.10 Vendor: MandrakeSoft
> Release : 0.1.a18mdkBuild Date: Tue Apr 10 16:
My guess is that pcmcia is not on. Look in
/etc/sysconfig/pcmcia and see if pcmcia=yes. Also can
go to shell menu and type /etc/init.d/pcmcia restart
--- Eleknader <[EMAIL PROTECTED]> wrote:
> Hi!
>
> My network adapter (3com 757 c, pcmcia card) is not
> properly configured
> after install.
> I
Hi,
I decided to download 8.0 and also Freeswan so that I
can hook-up with my company intranet. But I noticed that
you already have a version of the software inside yet I could
not find ipsec, klips, etc... Since I am relavtively new to Linux,
I would like to know if this beta has a complete
bor@localhost% soundwrapper xmms
÷ÙÌÅÔÅÌÉ!
ðÏÚÄÒÁ×ÌÑÀ! ÷Ù ÓËÏÒÅÅ ×ÓÅÇÏ ÎÁÛÌÉ ÚÌÏÓÔÎÙÊ ÂÁÇ × XMMS!!!
ðÏÖÁÌÕÊÓÔÁ ÐÏÓÅÔÉÔÅ http://www.xmms.org/bugs É ÚÁÐÏÌÎÉÔÅ ÆÏÒÍÕ
(Translated - Terminated! Congratulations! You hit a serious bug in
XMMS!!! Please visit bla bla bla).
Starting xmms on command lin
I just tried to install 8.0 beta 3 for the first time.
(System is a Matsonic 8308 with on-board video, sound, ethernet, 700
MHz Duron, 192 MB Ram. On board ethernet is disabled to use a 10 mbit
Coax ethernet (Realtek 1029(??), I forget the number right now, but the
installation autodetected it
"Bruce F. Press" <[EMAIL PROTECTED]> writes:
> Whenever I try to use rpmdrake or urpmi, I get the following
> cryptic mesage:
>
> unable to determine rpms cache directory /var/cache/urpmi/rpms
> unable to get source packages, aborting at /usr/bin/urpmq line 153.
>
> /var/cache/urpmi/rpms exists
Paul Giordano wrote:
>
> try:
>
> rm -f /var/cache/urpmi/rpms/.listing
Right on the money!
Thanks
>
> see what happens then...
>
> - Original Message -
> From: "Bruce F. Press" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, April 10, 2001 9:51 AM
> Subject: [Cooker
try:
rm -f /var/cache/urpmi/rpms/.listing
see what happens then...
- Original Message -
From: "Bruce F. Press" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 10, 2001 9:51 AM
Subject: [Cooker] problem with rpmdrake/urpmi
> Whenever I try to use rpmdrake or urpmi, I
Spencer <[EMAIL PROTECTED]> writes:
> Cooker Version 20010410
>
> Updated this morning
>
> [sda@sdander sda]$ rpm -q libibtk0
> libibtk0-0.0.14_pre2-11mdk
> [sda@sdander sda]$ rpm -q gatos
> gatos-0.0.6-0.20010216.9mdk
>
> Gatos won't start as user
Jürgen Zimmermann <[EMAIL PROTECTED]> writes:
> Ok. But this raises one more question:
> Why are the asm/linux-Includes both provided in kernel-headers AND
> kernel-source?
> Couldn't the "few" different files be generated on demand, especially
> the
> module versions, which do not work for SMP
On Tue Apr 10, 2001 at 02:29:23PM +, Vadim Plessky wrote:
> But I am against updating to NN 4.77, there is a Konqueror, Mozilla 0.8
> snapshot, Galeon + Nautilus.
> If somebody is interested in security fixes, he should try on of those.
You can't just arbitrarily tell someone that the brows
kernel-source-2.4.3-10mdk
make dep
make[1]: ÷ÈÏÄ × ËÁÔÁÌÏÇ `/usr/src/linux-2.4.3/arch/i386/boot'
make[1]: ãÅÌØ `dep' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[1]: ÷ÙÈÏÄ ÉÚ ËÁÔÁÌÏÇ `/usr/src/linux-2.4.3/arch/i386/boot'
scripts/mkdep -- init/*.c > .depend
scripts/mkdep -- `find /usr/src/linux-2.4.3/includ
On Mon, 9 Apr 2001, Andrej Borsenkow wrote:
> >
> >
> > Andrej Borsenkow <[EMAIL PROTECTED]> writes:
> >
> > > Running kernel-2.4.3-8mdk + initscripts-5.78-3mdk I again have the strange
> > > problem - power is not completely switched off. Hardware - ASUS CUSL2
> > > motherboard, i815e chipset, 1
On Tue, 10 Apr 2001, Vadim Plessky wrote:
> On Tuesday 10 April 2001 12:25, Mike Perry wrote:
> | This driver is based on the open source development being done within the
> | XFree86 Project. The driver remains unmodified, with the exception of the
> | HAL module, which is a closed source
If both ACPI and APM are compiled in kernel, normally APM is used unless
disabled. So, we can distribute Mandrake kernel with both and let people
use ACPI by simply adding apm=off.
Comments? (I just found that ACPI finally intializes correctly on my
system so I would be very interested to play wi
> BTW: has somebody tried *new* G800?
> Does it give NVidia a run?
What!? There is no such thing as a G800 and no one knows if there ever gonna
be. On the other hand it looks like Matrox will release a 'G550'.
Regards,
Mattias
Thanks for the timely response :-)
Daniel McKee
On Tue, 10 Apr 2001, Pixel wrote:
> Daniel McKee <[EMAIL PROTECTED]> writes:
>
> > Addendum:
> >
> > Anything that uses perl is now broken with the new perl rpm or srpm
> > (perl5-5.601)...libperl.so: cannot load shared object file: No such file
>
Andrej Borsenkow écrivit :
> > On Mon, 9 Apr 2001, Andrej Borsenkow wrote:
> >
> > > Confirmed with the artsd in KDE 2.1.1-3mdk and libqt2-2.3.0-2mdk. I am not
> > > sure about fonts but I switched on AA fonts and nothing (bad) happened.
> > > So, I presume they are really not activated :-)
> > >
Chmouel Boudjnah wrote:
>
> Jürgen Zimmermann <[EMAIL PROTECTED]> writes:
>
> > Hello,
> > I wonder why the kernel-headers for 2.4 kernels do install in
> > /usr/include?
> > Isn't it sufficient to install them in /usr/src/linux-2.4.*/include
> > and set appropriate symlinks from
> > /usr/includ
On Tuesday 10 April 2001 12:25, Mike Perry wrote:
| Damm things still crippled!
|
| from their (Matrox) own readme.txt:
|
| This driver is based on the open source development being done within the
| XFree86 Project. The driver remains unmodified, with the exception of the
| HAL module,
System:
Dual Pentium III - 667 MHz
RAM 1 GB
SCSI: 2 x 53C1010 (onbord) - 160 MB
Disks: 3 x Seagate ST-318404 LW - 18 GB
Problem:
Installer report WRONG head/cyl/sectors for sda.
It happened even with eide disk on other computer and I solved the problem
appending "linux hda=xxx,xxx,xxx" when bo
Cooker Version 20010410
Updated this morning
[sda@sdander sda]$ rpm -q libibtk0
libibtk0-0.0.14_pre2-11mdk
[sda@sdander sda]$ rpm -q gatos
gatos-0.0.6-0.20010216.9mdk
Gatos won't start as user. I get;
[sda@sdander bin]$ ./xatitv
XF86DGAGetVideo: failed to map video memory (Permission d
I noticed the perl upgrade to 5.601 was short lived and now back to 5.600. It
works again. Thanks.
Con.
This morning syncing w/urpmi -
error: failed dependancies:
kdepim < 2.1.1-3mdk conflicts
with kdelibs-2.1.1-3mdk kdebase < 2.1.1-4mdk
conflicts with kdelibs-2.1.1-3mdk
Jürgen Zimmermann <[EMAIL PROTECTED]> writes:
> Hello,
> I wonder why the kernel-headers for 2.4 kernels do install in
> /usr/include?
> Isn't it sufficient to install them in /usr/src/linux-2.4.*/include
> and set appropriate symlinks from
> /usr/include/asm -> /usr/src/linux/include/asm
> /usr/
Here is the link explaining the security exploit patched in 4.77:
http://linuxtoday.com/news_story.php3?ltsn=2001-04-09-011-20-SC
Con.
On Tue, 10 Apr 2001 21:59, you wrote:
> On 10-Apr-01 Vadim Plessky wrote:
> > On Sunday 08 April 2001 19:58, R.I.P. Deaddog wrote:
> >| The problem is, does t
On Tuesday 10 April 2001 02:14, michael wrote:
| On the same lan as my cooker box, which is hosed right now, I have this
| 7.2 box. I added another user, and now many of the fonts are those big
| dotted ones. Like the names but not what is inside the compose area of
| kmail. Or netscape.
|
| W
Hello,
I wonder why the kernel-headers for 2.4 kernels do install in
/usr/include?
Isn't it sufficient to install them in /usr/src/linux-2.4.*/include
and set appropriate symlinks from
/usr/include/asm -> /usr/src/linux/include/asm
/usr/include/linux -> /usr/src/linux/include/linux
The "problem"
I can't recompile custom kernel-2.4.3-12mdk.src.rpm :
with configuration:
#CONFIG_NFSD is not set
CONFIG_REISERFS=y
namei.c: In function `resisersfs_decode_fh':
namei.c:1396: `__func__ undeclared (first use in this function)
Compilation failed...
If I change kernel configuration
CONFIG_NFSD=m
On Monday 09 April 2001 15:10, Pixel wrote:
| Marcio Conceicao <[EMAIL PROTECTED]> writes:
| > When I installed Mandrake 8b3 and 7.2 I chosse Layout ABNT2 for my
| > keyboard but in XF86Config-4 the Mandrake put Model "pc105", and I have
| > manually change this to "abnt2" to run correctly
On Tuesday 10 April 2001 01:33, you wrote:
> Yes, you /could/ find it out from the assembler code provided
> that you know the exact kernel used.
> But it is usually far easier to just look at the clear text
> message right before that. Does it by any chance say something
> like 'Unable to mount r
On 10-Apr-01 Vadim Plessky wrote:
> On Sunday 08 April 2001 19:58, R.I.P. Deaddog wrote:
>| The problem is, does the upgrade worth all the troubles merging all
>| translations to new version
>
> But I am against updating to NN 4.77.
It's updated in Cooker a few days ago, so I guess that's i
Damm things still crippled!
from their (Matrox) own readme.txt:
This driver is based on the open source development being done within the
XFree86 Project. The driver remains unmodified, with the exception of the
HAL module, which is a closed source library used to enable features such as
DualHea
> What happened to kcontrol settings and all my menus?
> I tried updatedb and update-menus and restarting but didn't fix it.
> Sorry if I stupidly missed something when upgrading these
> packages.
No, I didn't get any menus either (Amusement, Applications, etc.) when I did
a fresh Cooker install
I keep getting libsafe.so.2.0 dep problem whenever I try to install an
rpm. I notice its not in the libsafe's provide list. Is this my RPM-4
problem (recompile RPM-4 packages again with the lastest python) ?
Again, sorry if this already asked.
=Spike=
Daniel McKee <[EMAIL PROTECTED]> writes:
> Addendum:
>
> Anything that uses perl is now broken with the new perl rpm or srpm
> (perl5-5.601)...libperl.so: cannot load shared object file: No such file
> or directory... And, I recompiled/installed the perl rpms fine...go
> figure Though I did
"Claudio (sekko)" wrote:
>
> Kvirc is both in Contribs and in Cooker. Maybe it's the same for other
> packages... Bye
Thanks Claudio, someone may have missed something during the upload :)))
The fix will appear shortly on mirrors.
lenny
--
Lenny Cartier <[EMAIL PROTECTED]>
Iptoip pr
JorgP <[EMAIL PROTECTED]> writes:
> > module is snd-card-es1938 and it wasn't detected ? what is your
> > /proc/bus/pci/devices please
>
> my AC97 Via chipset is not detected either... MS6330 motherboard
> here is my devices
> [root@localhost /proc/bus/pci]# more devices
> 11060305
Byron Poland <[EMAIL PROTECTED]> writes:
> Second, On my system during the install and normal running I constantly
> get console messages:
> "usb-uhci.c: interrupt, Status 3, frame 716" the last number varies on
> every message.
> My system is has a Epox 8kta mainboard with a duron 700. I use a
"Eleknader" <[EMAIL PROTECTED]> writes:
> Hi!
>
> My network adapter (3com 757 c, pcmcia card) is not properly configured
> after install.
> I have Dell Cpx 450 laptop.
>
>
> Installation finds it OK, and asks for IP. After setting IP, pressing OK ->
> install
> asks IP for 3 Com 59x, which I
Claudio (sekko) <[EMAIL PROTECTED]> writes:
> On Monday 09 April 2001 20:58, you wrote:
> > Guillaume Cottenceau <[EMAIL PROTECTED]> writes:
> > > > i couldn't reproduce the problem do you have an only RAID FS ?
> > >
> > > When testing for the mkinitrd patch I had the same problem. I had
> > > r
Vincent Danen <[EMAIL PROTECTED]> writes:
> On Tue Apr 10, 2001 at 12:53:13AM -0400, Yura Gusev wrote:
>
> >
> > Can you plz remove %make ... from your SRPMs spec files (ex db1)
> > and change it to make or it wont compile. (i used RPM version 4.0.2);
> >
> > http://www.rpmhelp.net/lists/rpmhe
Hi!
My network adapter (3com 757 c, pcmcia card) is not properly configured
after install.
I have Dell Cpx 450 laptop.
Installation finds it OK, and asks for IP. After setting IP, pressing OK ->
install
asks IP for 3 Com 59x, which I don't even have. If I click cancel, network
will not
be confi
Kvirc is both in Contribs and in Cooker. Maybe it's the same for other
packages... Bye
Claudio
--
Nothing's as simple as it seems...
[root@monster root]# echo "hello world"
[root@monster root]# Segmentation fault (core dumped)
[root@monster root]# Kernel Panic! - System is halted...
po
Seen this news in linuxgames.com.
Is it an appropriate time to incorporate the new opensource'd driver into
XFree86 package?
On Sunday 08 April 2001 19:58, R.I.P. Deaddog wrote:
| The problem is, does the upgrade worth all the troubles merging all
| translations to new version... particularly when mozilla is on the
| horizon..
|
My estimation that Mozilla 1.0 (real *working* 1.0, if 1.0 can work at all :-
On Monday 09 April 2001 22:15, J . A . Magallon wrote:
| On 04.10 OS wrote:
| >
| > Hmmm ! Mozilla has been on the horizon since the big bang ! I keep
| > trying Mozilla, at least once a week from the nightly builds, but
| > invaribly I keep going back to good old faithfull ! And Netscap
On Monday 09 April 2001 13:42, Randy Kramer wrote:
| Fred,
|
| Thanks for the response! It looks like I misled you -- I'm not sure
| anymore wnere I got the rpms for kde 2.1, but the rpms for kde 2.1.1 are
| under:
|
|
| http://carroll.cac.psu.edu/pub/linux/distributions/mandrake-devel/
On Tue, 10 Apr 2001, Daniel McKee wrote:
> I am also having problems with the newest perl( perl5-5.601)seems to
> have broken alot of things :-/ I am getting ?LWP? errors and the
> libperl.so libary seems to be messed up (i recompiled the srpm of
> perl5-5.601).
>
Try making a symlink f
[EMAIL PROTECTED] (Andrej Borsenkow) writes:
> bor@localhost% rpm -qa | grep -i drak
> userdrake-0.3-1mdk
> mandrake-release-8.0-0.1mdk
> drakxtools-1.1.5-79mdk
> DrakConf-0.61-34mdk
> mandrake_doc-en-0.5-9mdk
> drakxtools-newt-1.1.5-79mdk
> drakfloppy-0.42-6mdk
> rpmdrake-1.3-41mdk
> drakfont-0.
Spot 1 mistake.
root@s186b:~# rpm -q --scripts imlib-cfgeditor
postinstall script (through /bin/sh):
if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
postuninstall script (through /bin/sh):
%{cleans_menus}
root@s186b:~#
Version = Linux-Mandrake Cooker-i586 20010410 8:06
What happened to kcontrol settings and all my menus?
I tried updatedb and update-menus and restarting but didn't fix it.
Sorry if I stupidly missed something when upgrading these packages.
Con.
On Tue, Apr 10, 2001 at 11:44:31AM +0400, Andrej Borsenkow wrote:
> 2. Boot Config does not reflect reality w.r.t. Aurora. I have Traditional
> style monitor but Boot Config shows me "NewStyle Categorizing Monitor"
> checked with picture of "NewStyle Monitor". May be, this is because I made
> link
Hi all,
I need a new userdrake RPM with updated po files. The current RPM dates of
05 february, which is much too old to shoot correct screen shots for the
german docs.
--
_
Tschüss und bis demnächst/à bientôt, _|_|
Yes, you /could/ find it out from the assembler code provided
that you know the exact kernel used.
But it is usually far easier to just look at the clear text
message right before that. Does it by any chance say something
like 'Unable to mount root device on XX:xx' or 'Unable to
open initial conso
Geoffrey, here?
Merely my suggestion:
1) mark /usr/share/timidity/timidity.cfg with %%config, but a
*REPLACEABLE* one, OR
2) make timidity++ require timidity-instruments
Personally I'd suggest (1), because (2) will make the whole distribution
more bloated but that's up to you anyway :)
Ab
I just did a Cooker install from sunsite.uio.no.
sshd couldn't start
apache - no such user
Tue Apr 10 01:38:38 2001
Does:
8b 5f 34 8b 7b 04 8b 6c 24 1c 89 7c 24 14 85 ff 0f 84 63 01
mean anything to anyone viz why my cooker won't?
-m-
oops it seems I upgraded in the middle of an ftp update and didn't get all
the new packages. Ignore my previous comment.
Thanks for attending to the apache updates to make ssl and php work (I've
only checked ssl so far). Only problem is now mod_perl doesn't work with the
perl upgrades. I'm sure they're in the pipeline and are about to be
redirected into cooker ;-)
Con.
1 - 100 of 113 matches
Mail list logo