Chmouel Boudjnah a écrit :
Ron Stodden [EMAIL PROTECTED] writes:
Already done! The Australian mirror now heads the list on your web
page.
But aaarnet (in Brisbane) was an official mirror for 7.0, and
appeared in your web page list. Why was it dropped without any
notification
Ron Stodden [EMAIL PROTECTED] writes:
Guillaume Cottenceau wrote:
not even a little smiley after this statement. waooh. hard..
Oops! Belated smiley :-(Belated grin G.
7.1 is out
But there are NO ftp/rsync mirror sites in the southern hemisphere,
NONE!!!
Makes it
Chmouel Boudjnah wrote:
Ron Stodden [EMAIL PROTECTED] writes:
But there are NO ftp/rsync mirror sites in the southern hemisphere,
NONE!!!
if you know some administrator who want to mirror our distribution in
your hemisphere we will be welcome to set them on the mirror page.
Already
Kit Ngan wrote:
Ron Stodden [EMAIL PROTECTED] writes:
But there are NO ftp/rsync mirror sites in the southern hemisphere,
NONE!!!
Here is a mirror in Hong Kong with 60M ATM Connection...
Good! But Hong Kong is not in the southern hemisphere (Lat 22 deg
N).
--
Regards,
Ron.
BS''D
I downloaded this night the mandrake71-inst.iso from ftp.free.fr
burned it to CD tried to install. For the first time ever this
went not through on my machine! |-
It stops suddenly in the middle of the install process and then
shows the following:
rpmRunTransaction finished,
Daniel Hammer [EMAIL PROTECTED] writes:
memory alloc returned NULL
aren't missing memory, try adding swap.
BS''D
the error message I get (wrote it a few minutes ago)
comes after the installer wants to install glibc
here, obviously must the error be ... or am I wrong!??
Best,
Daniel.
BS''D
I have 500 MB swap and 256 MB RAM this must be enough never had these problems
before, think glibc is the problem
memory alloc returned NULL
aren't missing memory, try adding swap.
BS''D
... sorry in advance for bothering you again with this ... but what's exactly
the difference between Hydrogen-Beta3-Install-ISO and the
Mandrake-Final-ISO. The latter one is by size bigger (ftp.free.fr) and by date
created earlier than the first one -- so there must be some differences.
"Riyad Kalla" [EMAIL PROTECTED] writes:
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be pressed/packaged. Where are the final ISOs? And if they aren't out
yet, WHEN? shaking by collar
David Talbot [EMAIL PROTECTED] writes:
Forgive my lack of education on the normal contents of a mandrake distro, I
got a 7.0 CD (free, someone passing it out) at an Internet World show and
never looked back at Red Hat. The link below only includes CDs, is there a
version of the distro that
"Jim Mitchell" [EMAIL PROTECTED] writes:
Does this mean that the cooker tree is open again?
it is at present time.
--
Guillaume Cottenceau
Alan Shoemaker [EMAIL PROTECTED] writes:
Riyadit would appear that unlike past releases, they are
holding off on putting the release iso's on the mirror sites
till the retail boxed sets are in place in the retailer's
stores. So, when the retail stuff is all in place then
they'll put
Ron Stodden [EMAIL PROTECTED] writes:
The coder should be taken outside and shot, as should Mandrake QA.
not even a little smiley after this statement. waooh. hard..
--
Guillaume Cottenceau
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux Mandrake w/some brand of asian
motherboard. Someone said that slashdot printed that a
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux Mandrake w/some brand of asian
motherboard. Someone said that slashdot printed that
this showed up sometime after lunch EST
http://www.linux-mandrake.com/en/pr-helium.php3
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Shoemaker
Sent: Tuesday, June 06, 2000 5:29 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] 7.1 Final ISOs
Benjaminhow come you snipped off my P.S.?
Alan
Benjamin Reed wrote:
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux
, June 06, 2000 5:29 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] 7.1 Final ISOs
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux
Benjaminhow come you snipped off my P.S.?
Because I had a brain fart and didn't notice it I guess. My bad. :)
--
Ben Reed a.k.a. Ranger Rick ([EMAIL PROTECTED])
http://defiance.dyndns.org / http://radio.scenespot.org/
Now playing on Defiance Radio: Silent Warrior by Enigma
Guillaume Cottenceau wrote:
not even a little smiley after this statement. waooh. hard..
Oops! Belated smiley :-(Belated grin G.
7.1 is out
But there are NO ftp/rsync mirror sites in the southern hemisphere,
NONE!!!
Makes it difficult.
How come?
--
Regards,
Ron. [AU] - sent
Forgive my lack of education on the normal contents of a mandrake distro, I
got a 7.0 CD (free, someone passing it out) at an Internet World show and
never looked back at Red Hat. The link below only includes CDs, is there a
version of the distro that also includes printed docs?
-David Talbot
Ron Stodden [EMAIL PROTECTED] writes:
Pixel wrote:
Ron Stodden [EMAIL PROTECTED] writes:
The coder should be taken outside and shot, as should Mandrake QA.
thanks for the advice. makes quite a few happy people here (does it hurt a lot,
i'm one of "The coder" :)
Pixel, I know
Pixel wrote:
the pb is that rpmlib doesn't tell so. Or at least i have to scan the
install.log to know that. I've already added this:
die _("Some important packages didn't get installed properly.
Either your cdrom drive or your cdrom is defective.
Check the cdrom on an installed
Ron Stodden [EMAIL PROTECTED] writes:
Pixel wrote:
the pb is that rpmlib doesn't tell so. Or at least i have to scan the
install.log to know that. I've already added this:
die _("Some important packages didn't get installed properly.
Either your cdrom drive or your cdrom is
Gary Russell wrote:
I am using beta 3 from free.fr I had no problems installing even from the
EXT CD. I installed from both CDs.
On the second CD, run:
rpm -qi -p * 2rpm.log
and you will see that most RPMs on the second CD are bad.
Apparently the installer just does not bother
"Alexander V. Voinov" [EMAIL PROTECTED] writes:
Hmm.
But I still cannot work with X 3.3.6 immediately after installation, it
misses some libraries. Last try was yesterday. I wouldn't consider it as
final in any sense.
this is cooker, not 7.1b3
i'm going to upload in new DrakX (be
Ron Stodden [EMAIL PROTECTED] writes:
Gary Russell wrote:
I am using beta 3 from free.fr I had no problems installing even from the
EXT CD. I installed from both CDs.
On the second CD, run:
rpm -qi -p * 2rpm.log
and you will see that most RPMs on the second CD are bad.
Hi Pixel,
ignore those emails, you should not even answer to such kind of rubbish.
To all of you coders: Keep your good work going on and on!!!
regards
Burkhard
Am Sam, 03 Jun 2000 schrieben Sie:
Ron Stodden [EMAIL PROTECTED] writes:
Gary Russell wrote:
I am using beta 3 from
Same here. I downloaded from free.fr as well and have no problems, atleast
that I've been able to find.
Jim Mitchell
- Original Message -
From: "Gary Russell" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 02, 2000 11:10 PM
Subject: Re: [Cooker] 7.1 Final
Does this mean that the cooker tree is open again?
Jim
- Original Message -
From: "Pixel" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 03, 2000 8:01 AM
Subject: Re: [Cooker] 7.1 Final ISOs
"Alexander V. Voinov" [EMAIL PROTECTED] writes:
Hmm.
and if it is can we get enlightenment 16.4 and gnome 1.2
- Original Message -
From: "Jim Mitchell" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 03, 2000 8:12 AM
Subject: Re: [Cooker] 7.1 Final ISOs
Does this mean that the cooker tree is open ag
"Jim Mitchell" [EMAIL PROTECTED] writes:
Does this mean that the cooker tree is open again?
not yet. at least not rpm's. should be real soon now (tuesday i think)
Submitted 03-Jun-00 by Pixel:
thanks for the advice. makes quite a few happy people here (does it hurt a lot,
i'm one of "The coder" :)
Well, I wouldn't recommend it :p
--
_
_|_|_
( ) *Anton Graham
/v\ / [EMAIL PROTECTED]
/( )X
(m_m) GPG
I think the fact that there has been no official announcement seems odd. That
and considering the fact that the word "beta" is in there- it may scare off a
few.
Yes, and what about the beta3 isos that doesn't work (the ext
one) ?
you r right there was a transmission problem
Strange... just tried them on my copy and they work fine. I installed Licq
from the Extensions CD with no problems. Maybe you just had a bad transfer.
I have always used the ISOs from free.fr with no problems.
I was referring to downloaded files from other sites. Figured it out. Had
to
Pixel wrote:
Ron Stodden [EMAIL PROTECTED] writes:
The coder should be taken outside and shot, as should Mandrake QA.
thanks for the advice. makes quite a few happy people here (does it hurt a lot,
i'm one of "The coder" :)
Pixel, I know you are a coder (and a very good one, might I
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be pressed/packaged. Where are the final ISOs? And if they aren't out
yet, WHEN? shaking by collar WHERE DAMNIT!!!??
Ok thanks,
Riyad Kalla
Java
And can we pre-order on-line? And if so, when can we expect it to arrive in
the mail?
-David Talbot
At 02:48 PM 6/2/00 -0700, you wrote:
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be
Pixel wrote:
"Riyad Kalla" [EMAIL PROTECTED] writes:
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be pressed/packaged. Where are the final ISOs? And if they aren't out
yet, WHEN?
Submitted 02-Jun-00 by Pixel:
| "Riyad Kalla" [EMAIL PROTECTED] writes:
|
| I've asked this question about 6 times and never gotten a response:
|
| It sounds from little remarks here and there, that 7.1 has gone final and
| off to be pressed/packaged. Where are the final ISOs? And if they
Hmm.
But I still cannot work with X 3.3.6 immediately after installation, it
misses some libraries. Last try was yesterday. I wouldn't consider it as
final in any sense.
Alexander
Riyad Kalla wrote:
I've asked this question about 6 times and never gotten a response:
It sounds from little
Riyadit would appear that unlike past releases, they are
holding off on putting the release iso's on the mirror sites
till the retail boxed sets are in place in the retailer's
stores. So, when the retail stuff is all in place then
they'll put the iso's on the mirrors and announce the
DavidI pre-ordered a GPL CD from LinuxLand:
http://www.LLand.com/products/defaultview.asp?ID=49
Alan
David Talbot wrote:
And can we pre-order on-line? And if so, when can we expect it to arrive in
the mail?
-David Talbot
At 02:48 PM 6/2/00 -0700, you wrote:
I've asked this
I think the fact that there has been no official announcement seems odd. That
and considering the fact that the word "beta" is in there- it may scare off a
few.
Yes, and what about the beta3 isos that doesn't work (the ext
one) ?
Pascal
So that means the final is being released with a broken identd?
(See my previous 2 bug reports.)
Don Head
Linux Mentor
Wave Technologies, Inc.
[EMAIL PROTECTED]
-Original Message-
From: Pixel
To: [EMAIL PROTECTED]
Sent: 6/2/00 4:58 PM
Subject: Re: [Cooker] 7.1 Final ISOs
"Riyad
I downloaded from free.fr and have never had any problems with the ISO that
I know of. Everything installed fine and is working fine.
Gary Russell
Maryville, TN
Yes, and what about the beta3 isos that doesn't work (the ext
one) ?
Pascal
I am using beta 3 from free.fr I had no problems installing even from the
EXT CD. I installed from both CDs.
Is there a problem with TAR in beta 3? I always try to find RPMs for
software that I want. Ok, call me lazy. I have been trying to install the
BTTV drivers, but keep getting
Pixel wrote:
"Riyad Kalla" [EMAIL PROTECTED] writes:
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be pressed/packaged. Where are the final ISOs? And if they aren't out
yet, WHEN?
Gary Russell wrote:
I am using beta 3 from free.fr I had no problems installing even from the
EXT CD. I installed from both CDs.
Is there a problem with TAR in beta 3? I always try to find RPMs for
software that I want. Ok, call me lazy. I have been trying to install the
BTTV
50 matches
Mail list logo