I will need to force an error and save the log. So it will take some
time :)
rss
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I will force an error and paste
Which logs do you want?
Xorg.1.log i would guess. Do you need anything else?
regards rss
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: timidity
Version: 2.13.2-39+b1
Severity: normal
Hello,
I installed timidty without the recomanded package freepats.
Launching timidity then failed with
/etc/timidity/freepats.cfg: No such file or directory
timidity: Error reading configuration file.
obviously installing freepats fixed
Package: multipath-tools
Version: 0.4.9-1
Below is a debdiff from Craig Magina applied to the Debian
experimental multipath-tools branch to create a debug
package for multipath-tools.
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/697690
=== modified file 'debian/changelog'
---
/ubuntu/+source/bind9/+bug/693002)
+
+ -- Serge Hallyn serge.hal...@ubuntu.com Tue, 04 Jan 2011 12:07:12 -0600
+
resolvconf (1.47) unstable; urgency=low
[ Thomas Hood ]
diff -Nru resolvconf-1.47/etc/resolvconf/update.d/bind
resolvconf-1.47fixbind/etc/resolvconf/update.d/bind
--- resolvconf-1.47
Package: lustre-source
Version: 1.8.3-4
Severity: important
Tags: squeeze
Tried to build lustre modules with command module-assistant -t build
lustre-source and got message:
checking for
/usr/src/linux-headers-2.6.32-5-openvz-amd64/include/linux/namei.h... no
checking if you are using Linux
From configure.log:
configure:5633: checking that modules can be built at all
configure:5648: cp conftest.c build make -d modules CC=gcc-4.3 -f
/usr/src/modules/lustre/build/Makefile
LUSTRE_LINUX_CONFIG=/usr/src/linux-headers-2.6.32-5-openvz-amd64/.config
LINUXINCLUDE=
+/dev/disk/by-uuid/{rootfs-uuid} will fail with -EBUSY. In that
+case, call 'udevsettle' to wait until udev has finished all its
+related actions. (Closes LP: #686832)
+
+ -- Serge Hallyn serge.hal...@ubuntu.com Fri, 19 Nov 2010 12:19:43 -0600
+
initramfs-tools (0.92bubuntu78) lucid
Package: libmysqld-dev
Version: 5.1-5.1.49
libmysql is compiled with --with-libwrap0. The source package depends
upon libwrap0-dev. However, libmysqld-dev does not seem to depend on
libwrap0, or on anything that does. Should libwrap0 be added to its
Depends: ?
--
To UNSUBSCRIBE, email to
Package: vsftpd
Version: 2.3.2-3
The postinst file for vfstpd checks for user and group
name 'ftp', but it actually only checks for names starting
with ftp. Instead of
if ! getent group | grep -q ^${_USERNAME}
it should check for
if ! getent group | grep -q
with the event that triggered renaming of the device.
which does seem cleaner.
thanks,
-serge
diff -Nru initramfs-tools-0.98ubuntu2/debian/changelog
initramfs-tools-0.98ubuntu3/debian/changelog
--- initramfs-tools-0.98ubuntu2/debian/changelog2010-08-20
03:48:58.0 -0500
+++ initramfs-tools
Package: gcc-4.3
Version: 4.3.2-1.1
Severity: normal
When compiling following source code
typedef int * intp;
void foo(intp);
void bar(void (*)(void*));
void warning()
{
bar(foo);
}
gcc warns about
`` passing argument 1 of ‘bar’ from incompatible pointer type ''
It seems
Package: quagga
Version: 0.99.10-1lenny2
Severity: normal
With two addresses configured on one physical interface, ripd
only sends responses from one, never from the other.
Here, I've got 82.x.y.z and 192.168.49.49 on eth1. Routers in
the outer network receive updates from 82.x.y.z. Local
Package: msmtp
Version: 1.4.15-1
Severity: normal
In msmtpq, the address pinged to check if network is hard coded,
A comment says it's google's IP but it does *not* work here. It may be
better to directly give the website hostname to ping ?
-- System Information:
Debian Release: 5.0.2
APT
Package: wnpp
Severity: wishlist
Owner: serge guelton serge.guel...@enst-bretagne.fr
serge.guel...@enst-bretagne.fr
* Package name: polylib
Version : 7
Upstream Author : Vincent Loechner loech...@icps.u-strasbg.fr
* URL : http://icps.u-strasbg.fr/polylib
* License
guess this bug affects the systems like mine, i.e. where root
partition is not on sda1 (or hda1,
etc..), so it may lead to serious trouble those who less experienced with
Linux.
Regards,
Serge Dudko
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Package: linux-image-2.6-686
Version: 2.6.26+17
Severity: normal
Running postinst hook script update-grub.
User postinst hook script [update-grub] failed to execute: No such file
or directory
dpkg: error processing linux-image-2.6.26-1-686 (--configure):
subprocess post-installation script
adding
cat /proc/mtd and ls /boot
% start --%
inconnu:~# cat /proc/mtd
dev:size erasesize name
mtd0: 0004 0002 RedBoot
mtd1: 0002 0002 SysConf
mtd2: 0002 0002 Loader
mtd3: 0014 0002 Kernel
mtd4: 0062 0002 Ramdisk
mtd5: 0002
Oops, forget -l switch on ls
% start %
inconnu:~# ls -l /boot
total 11452
-rw-r--r-- 1 root root 636580 Oct 16 19:32 System.map-2.6.18-6-ixp4xx
-rw-r--r-- 1 root root 787178 Nov 28 13:55 System.map-2.6.26-1-ixp4xx
-rw-r--r-- 1 root root 42892 May 21 2008 apex.flash
your
website. At the time that was not a debian official installer but an image
that you could install to run debian.
Maybe that is what is biting me now. I will try your suggestion with
upslug2. and the image you suggest.
Do I let you and the bug report know what the result was?
Regards
Serge
with a running image that works. I guess the
bug can be closed now. If there are any steps that I can take to assist in
narrowing the users with this problem and therby aking your excellent
suggestion available to them please let me know!
Thank you!
Regards
Serge Rijkers
--
To UNSUBSCRIBE, email
Package: dia
Version: 0.96.1-7
Severity: normal
Hello,
while trying to generate some code from a simple uml diagram (a unique
class with a single virtual method), It appears that the virtual keyword
is not added.
It makes the code generation rather difficult to use !
Thanks a lot if you have
Package: autodia
Version: 2.03-2
Severity: minor
Hello,
both `autodia --help' and `man autodia' refer to autodia.pl, while the
installed program name is autodia.pl.
It is just cosmetic, yet a bit disturbing :p
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy:
If you are trying to find good health shop. You wont find better solution than
our site. We
have everything to help to recover of ilnesses.Even if you need prompt delivery
at your door you can always
count on us. Get the most experienced help as fast as a mouse click.
levelwisdom.com
20 Jul
Package: w3c-linkchecker
Version: 4.3-1
Severity: important
Good Morning,
after an install of w3c-linkchecker on my debian testing,
I tried to checklink an https website, and this failed with an error
concerning unavailable ssl lib.
I installed libcrypt-ssleay-perl, and this solved the problem.
Cant stand the pressure of her expectations in bed? Heres the answer.
http://www.asestio.com/
Measure Up To Your Future
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Women love their men well hung.
http://www.fantestecs.com/
Add up to 3 inches today.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
ErectileorganQueen-sizeAdolph http://www.Plaserable.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: virtualbox-ose
Version: 1.5.6-dfsg-2
Severity: normal
--- virtualbox-ose.orig 2008-03-05 17:54:46.0 +0300
+++ virtualbox-ose 2008-03-19 23:58:49.0 +0300
@@ -390,14 +390,14 @@
start)
# try to insert module but do not fail if not possible
if [
Order Prescriptoins tomorrow
www.apperceptionacolyte.alba%2econtinuemove.com
be atomicarmature
absent but alexandra
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
of
Midnight Commander or Demos Commander.
___
Regards,
Serge Vakulenko
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libc6
Version: 2.3.6.ds1-13etch2
This program produces wrong output on etch arm
(compiler version/flags/etc doesn't matter):
#include stdio.h
int main (void)
{
printf (%llu\n, 450ULL);
return 0;
}
$ ./a.out
0826408960
$
--
To UNSUBSCRIBE, email to
That's all.
p.s. sorry sending this report non-standard way. It was created on newly
configured system not yet connected to I-net.., and manually sent via my
regular mailer on myworkplace PC...
Best regards,
Serge Dudko
--
To UNSUBSCRIBE, email
On mar, 2007-06-12 at 17:21 +0200, Agustin Martin wrote:
tag 428277 pending
thanks
On Sun, Jun 10, 2007 at 12:32:24PM +0200, Serge Leblanc wrote:
Package: dictionaries-common
Version: n/a
Tags: l10n, patch
Severity: wishlist
Esperanto translation for dictionaries-common messages
On lun, 2007-06-11 at 07:27 +0200, Christian Perrier wrote:
Quoting Serge Leblanc ([EMAIL PROTECTED]):
Package: debconf
Version: n/a
Tags: l10n, patch
Severity: wishlist
Esperanto translation for debconf messages.
A small default. I can correct it myself, but better show
Package: debconf
Version: n/a
Tags: l10n, patch
Severity: wishlist
Esperanto translation for debconf messages.
Sincere via,
--
Serge Leblanc
gpg --keyserver hkp://subkeys.pgp.net --recv-keys 0x73791C2B
Fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
# translation to Esperanto
Package: dictionaries-common
Version: n/a
Tags: l10n, patch
Severity: wishlist
Esperanto translation for dictionaries-common messages.
Sincere via,
--
Serge Leblanc
gpg --keyserver hkp://subkeys.pgp.net --recv-keys 0x73791C2B
Fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
Package: console-common
Version: N/A
Severity: wishlist
Tags: l10n patch
Bonvolu trovi ĉi kune la esperantan tradukon de la pakaĵo
'console-common'.
Please find attached the Esperanto translation of the console-common
package.
Kore,
--
Serge Leblanc [EMAIL PROTECTED]
gpg --keyserver hkp
.
Kore,
--
Serge Leblanc [EMAIL PROTECTED]
gpg --keyserver hkp://subkeys.pgp.net --recv-keys 0x73791C2B
Fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
# translation to Esperanto
# Copyright (C) 2007 Free Software Foundation, Inc.
# Serge Leblanc [EMAIL PROTECTED], 2007.
#
msgid
Simple Instant Messenger data file
ii zlib1g 1:1.2.3-13compression library - runtime
sim recommends no packages.
-- no debconf information
--
Serge Matveev - GoogleTalk/ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
information
--
Serge Matveev - GoogleTalk/ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: samba
Version: N/A
Severity: wishlist
Tags: l10n patch d-i
Jen traduko de la dosiero samba_po_eo.po.
Voici une traduction du fichier samba_po_eo.po.
Here is translation for samba_po_eo.po.
Sincere,
--
Serge Leblanc [EMAIL PROTECTED]
gpg --keyserver hkp://subkeys.pgp.net --recv-keys
as mentionned in the previous message, the table of content generation
is very usefull, and is somehow missing in current distrib.
It would be very nice to have it packaged !
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: exim4
Version: N/A
Severity: wishlist
Tags: l10n patch d-i
Jen ĝisdatigita traduko de la dosiero exim4_debian_po_eo.po
Voici une mise à jour de la traduction du fichier exim4_debian_po_eo.po
This is the updated translation for exim4_debian_po_eo.po
Sincere via,
--
Serge Leblanc [EMAIL
Same problem with 2.6.18-4-k7.
[EMAIL PROTECTED]:~$ uname -a
Linux ws 2.6.18-4-k7 #1 SMP Wed Feb 21 16:48:19 UTC 2007 i686 GNU/Linux
Just found this bug through google by keywords strace qemu ioctl
TUNSETIFF EPERM
--
Best wishes,
~ Serge. pubkeys: http://uch.net/~fisher/keys.asc
Package: popularity-context
Version: N/A
Severity: wishlist
Tags: l10n patch
Ĉi kune, bonvolu trovi korektitan dosieron popularity-context_debian_po.
Dankon,
--
Serge Leblanc [EMAIL PROTECTED]
gpg --keyserver hkp://subkeys.pgp.net --recv-keys 0x73791C2B
Fingerprint: 8E0C 0D6D E026 A278 9278 BF4F
processing library - runtime
ii libxss11:1.1.0-1 X11 Screen Saver extension library
ii sim-data 0.9.4.2-1 Simple Instant Messenger data file
ii zlib1g 1:1.2.3-13compression library - runtime
sim recommends no packages.
--
Serge
Package: debconf
Version: N/A
Severity: wishlist
Tags: l10n patch
Please find attached the Esperanto translation of the debconf_debian_po
package.
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED]
gpg --keyserver hkp://subkeys.pgp.net --recv-keys 0x73791C2B
Fingerprint: 8E0C 0D6D E026 A278 9278
* cards ... but apparently not with the BCM5704 :-(
Best regards,
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
the 2.6.18 kernel.
Best regards,
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
) but the
'cached reads' performance is too slow (Pentium M 750 1.86 Ghz). Using
the (K)ubuntu live-cd I get +- 1650 MB/sec.
I tried this on 3 different laptops. Any ideas what the reason might be
?
Regards,
Serge
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500
2006/11/24, Eddy Petrișor [EMAIL PROTECTED]:
Sorry, I miss the answer to this request:
Try keeping the key pressed for a longer time and see if the key press is
recognized.
Sorry for the delay. The programme does not respond to 30-seconds-long
key presses.
Best regards,
jetxee
Package: linux-image-2.6.18-2-686
Version: 2.6.18-5
Severity: normal
Hi,
Ejecting a Cardman 4040 reader freezes my system. A cold boot is the
only way out.
I'm using the cm4040_cs kernel module.
Regards,
Serge
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy
Package: libqt4-dev
Version: 4.2.0-2
Severity: normal
qmake with QT += sql adds the following dependency: -lmysqlclient_r
This only works if libmysqlclient15-dev is installed ...
If I recall correctly, prior to version 4.2 of this package, qmake
didn't generate a Makefile with -lmysqlclient_r
Hi,
I looked at the ru.po file you sent me. There was only
one fuzzy there, and looked fine to me. But there
were also a few empty strings, - I translated them.
Let me know if there are any problems.
Sergei
--- [EMAIL PROTECTED] wrote:
Take your pardon, last mail was against alsa-driver
deb http://www.vanginderachter.be/downloads/debian/packages/archives sarge main
Serge
--
Serge van Ginderachter
http://www.vanginderachter.be/
Sometimes I think the surest sign that intelligent life exists elsewhere
in the universe is that none of it has tried to contact us
by the
bugs :)
Serge
--
Serge van Ginderachter
http://www.vanginderachter.be/
Failing to plan is planning to fail.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
keep using
gpg: WARNING: gpg 1.2.x, 1.3.x or 1.4.x for OpenPGP
gpg: signal Segmentation fault caught ... exiting
Segmentation fault
I am using Debian GNU/Linux Sid, kernel 2.4.27, libc6 2.3.6-16,
gunpg 1.4.3-2, gnupg 1.9.20-1.1
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D/73791C2B 2002-09
Hit the same bug yesterday.
Debian 3.1 r1a, bought on DVDs. Pentium 4 2.40GHz,
1Gb RAM, ST Lab A162 PCI ATA 133 IDE controller,
two Seagate Barracuda ST3250823A 250 Gb HDDs.
Attempts to enable any kind of quotas for XFS mounted
as the root file system resulted in it being mounted ro.
Passing
Hi,
Apparently connecting to Cups from KDE apps seems to work again *after*
adding a new printer through http://localhost:631 ...
Regards,
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
/cupsd.conf does not help.
Best regards,
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libqt4-debug
Version: 4.1.3-3
There are no symlinks created to be able to build programs correctly
with the debug versions of the Qt libs.
For example the QtSql lib:
When building with 'g++ -lQtSql_debug' the following error is shown:
/usr/bin/ld: cannot find -lQtSql_debug
The reason
sim recommends no packages.
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-686-smp
Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R)
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Jun 13, 2006 at 04:51:51AM +0100, Mark Purcell wrote:
On Sunday 11 June 2006 10:28, Serge Matveev wrote:
This version doesn't show exif info in images. The exif tab in image
properies is empty. In conqueror the exif info displays properly.
Serge,
Thanks for this report
KDE's advanced file manager, web b
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: exim4
Tags: l10n patch
On Sun, 2006-05-28 at 19:02 +0200, Andreas Metzler wrote:
On 2006-05-28 Serge Leblanc [EMAIL PROTECTED] wrote:
Package: exim
Tags: l10n patch
Saluton, i kune esperanta traduko de la dosiero :
./exim4/debian/po/eo.po
Kore,
Hello, herewith
Package: exim
Tags: l10n patch
Saluton, i kune esperanta traduko de la dosiero :
./exim4/debian/po/eo.po
Kore,
Hello, herewith a translation in esperanto of the file:
./exim4/debian/po/eo.po
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D/73791C2B 2002-09-30
Primary key
Package: newt
Tags: l10n patch
Hello, herewith a translation in esperanto of the file:
./newt/newt/po/eo.po
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D/73791C2B 2002-09-30
Primary key fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
# translation
Package: evolution
Version: 2.6.1-2
Severity: normal
starting evolution loads processor to 100% with dbus error messages. this make
the system unresponsive.
I am unsure whether this is caused by a plugin.
I am using the exchange connection and 2 imap connections.
The system functions barely.
thing I will try
to comply.
What I will not do is step through code line by line.
Regards
Serge Rijkers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: mldonkey-server
Version: 2.7.3-2
Severity: wishlist
Version 2.7.5 of mldonkey is availble since April 12, 2006
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
libkdepim1a 4:3.5.2-1+b1 KDE PIM library
ii libqt3-mt 3:3.3.6-1Qt GUI Library (Threaded runtime v
ii libstdc++6 4.1.0-1+b1 The GNU Standard C++ Library v3
akregator recommends no packages.
-- no debconf information
--
Serge Matveev (home) - ICQ
Package: cuetools
Version: 1.3-2
Severity: wishlist
cuetools-1.3.1 is available. This release fixes several bugs in version
1.3.0.
http://developer.berlios.de/project/showfiles.php?group_id=2130
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy:
Package: cuetools
Version: 1.3-2
Severity: wishlist
cuetag.sh is very useful utility. Please add this utility to binary
package. cuetag.sh resides in extras source directory
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
On Tue, Apr 11, 2006 at 01:17:54AM +0200, Yann Dirson wrote:
On Mon, Jan 10, 2005 at 01:11:24AM +0300, Serge Matveev wrote:
Package: konwert
Version: 1.8-9
Severity: minor
Man page for konwert is formatted incorrectly - I can't see end of page
Package: exim4
Version: 4.60-4
Followup-For: Bug #233803
Bad choice Debian-exim user name, too long and has capital letter for
no reason
-- Package-specific info:
Exim version 4.60 #1 built 22-Feb-2006 10:45:11
Copyright (c) University of Cambridge 2005
Berkeley DB: Sleepycat Software: Berkeley
Package: tasksel
Tags: l10n patch
Saluton, i kune esperanta traduko 'tasksel'-dosierojn.
./debian/po/eo.po
./tasks/po/eo.po
./po/eo.po
Kore,
Hello, herewith a translation in esperanto of the files:
./debian/po/eo.po
./tasks/po/eo.po
./po/eo.po
Cordially,
--
Serge Leblanc [EMAIL PROTECTED
Package: tome
Version: 2.3.3-2
Severity: wishlist
Please add -DUSE_X11 in the makefile.std - this target is very nice and
allow to change fonts and windows sizes
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386
Package: kchmviewer
Version: 1.3a-1
Severity: wishlist
Feb 4 2006 Version 2.0 released. Added 'locate in content window' button
to look up currently opened topic in the content window. Content tree parser
made bullet-proof. Fixed showing images-only pages. In full screen mode the
menu bar and
On Tue, Feb 07, 2006 at 11:31:22PM +0900, Osamu Aoki wrote:
On Sun, Feb 05, 2006 at 03:19:58PM +0300, Serge Matveev wrote:
Package: ipmasq
Version: 4.0.6
Severity: normal
If I use dash as /bin/sh, I get the next error message:
/etc/ipmasq/rules/A01routes.rul: 22: Syntax error
-conffiles:
ipmasq/ppp-turn-off:
* ipmasq/ppp-turn-on:
ipmasq/move-ipmasq.rules: true
* ipmasq/ppp-recompute: false
ipmasq/old-ipmasq.conf: true
ipmasq/old-rc.boot-file: true
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
Package: popularity-contest
Tags: l10n patch
Saluton, i kune esperanta traduko de la dosiero :
./popularity-contest/debian/po
Kore,
Hello, herewith a translation in esperanto of the file:
./popularity-contest/debian/po
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D
'
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D/73791C2B 2002-09-30
Primary key fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
# translation of templates.po to Esperanto
#
#Translators, if you are not familiar with the PO format, gettext
#documentation is worth
in repository `/cvsroot/popcon/popularity-contest'
cvs [checkout aborted]: read lock failed - giving up
Sincerely,
--
Serge Leblanc [EMAIL PROTECTED] GnuPG id: 1024D/73791C2B 2002-09-30
Primary key fingerprint: 8E0C 0D6D E026 A278 9278 BF4F 1A93 D552 7379 1C2B
signature.asc
Description
these
sources aren't 'official' and may be 'incorrect', but works perfectly with
apt.
OTOH, empty MD5 sum may be result of some errors. Because that I ask
you config option for this.
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
-level object-o
ii python-apt0.6.13.1 Python interface to libapt-pkg
wajig recommends no packages.
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.12-1-686-smp
Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R)
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email
.
-- no debconf information
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: ospics
Version: 0.72d-2
File /usr/share/ospics/Debian.png fails integrity check:
$ pngcheck /usr/share/ospics/Debian.png
/usr/share/ospics/Debian.png CRC error in chunk IDAT (actual 55757ba0, should
be 5dcbdc43)
$
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
The same happens with ubuntu package 1.3.21-6ubuntu3,
ubuntu 5.10, i386
--
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: openoffice.org
Version: 1.1.3-9
Severity: important
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.14.2
Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R)
Hello!
oodraw crashes when inserting an epsi file with preview into a
to load.c, and recompile irqbase. Now it works.
This is ugly solution, but I do not know the better one.
--
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-profiles/replace-gconf-system-wide-path-file:
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
=-s 1
ENABLE=yes # if you do not need to start irattach, set no
thanks
--
Serge
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
In can meanwhile confirm that this update also solves the problem in
rsnapshot. Upstream has also been updated on this.
Is there any way where this patch could go into Sarge?
--
Serge van Ginderachter
smime.p7s
Description: S/MIME Cryptographic Signature
any feedback
I could learn from, thanks.
I will further monitor the behavior of rsnapshot, which was broken in
Sarge because of this bug. I expect that problem to be solved now in Sarge.
HTH,
--
Serge van Ginderachter
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
' from degault pstree settings and close this
bug.
--
Serge Matveev (home) - ICQ:3575357
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
tag 325050 upstream
forwarded 325050 http://gcc.gnu.org/bugzilla/show_bug.cgi?id=23567
thanks
Analysed and reported to upstream developers.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
301 - 400 of 424 matches
Mail list logo
