Last two were on 12 Nov 19 Nov, both Sundays, as is today. It would seem
clear this has something to do with what happens in the weekly cron job??:
[Sun Nov 26 06:28:15 2006] [notice] caught SIGTERM, shutting down
[Sun Nov 26 06:28:23 2006] [error] Init: Unable to read pass phrase [Hint: key
Hi,
from the package descriptions, feta and wajig seem to have the same features.
Joe Wreschnig, the orphaning maintainer of feta is also it's upstream, so I
wonder what reasons there are to keep feta in the archive?
Wouldn't removing it and adding a conflicts: provides: feta (or
replaces?
I more precise description of the symptoms:
I use Fluxbox for a window manager. I am not sure if other window managers are
affected, but I do have more then one computer and all behave the same way:
what happens is when Ctrl-space is pressed to bring up the xcin input window in
one workspace,
On 25/11/06 at 15:44 -0800, Jeff Breidenbach wrote:
While trying to autobuild lucene, I ran into several different failures.
Over 16 builds, it failed 3 times and timeouted once.
And succeeded 12 times? Sounds good enough to me. Let's leave
this alone until etch is released, then can look
Hi,
quoting #184426: xearth is non-free and there is an excellent free substitute
for it, xplanet. Perhaps there is no longer a need for an xearth package
in the Debian archives?
It's orphaned, not in etch and http://bugs.debian.org/xearth doesn't look good
too.
I suggest to remove it.
Package: nictools-pci
Version: 1.3.8-1
Severity: normal
tulip_diag (and presumably the rest) try to access the legacy
/proc/pci interface which doesn't seem to exist in debian's 2.6 kernel
packages (I recall a kernel config of CONFIG_PCI_LEGACY_PROC, but this
seems to be removed from the kernel
What are the basic concepts of the system? What's a jail? What is
the difference between the configuration subdirectories (some help on
http://fail2ban.sourceforge.net/wiki/index.php/MANUAL_0_8)?
Please have a look at
Probably I'm going to miss that one too. :-(
No, I was just about to build the package..:-)
signature.asc
Description: Digital signature
hi, I have just seen your reply today, sorry about the long delay.
I hadn't checked the code, so it seemed to me infinite. But,
nevertheless, is stupid to wait for a timeout when there is already an
error pending. I still think this is a bug.
You tagged it unreproducible, is that so? Can't you
Package: libnss-ldap
Version: 238-1
Severity: grave
Justification: renders package unusable
Hi!
When I configure CA directory with tls_cacertdir configuration option
in /etc/libnss.conf file NSS querying (for example finger mitar) takes
very long (about 20 seconds per query). With only CA file
detail, see http://www.tdiary.org/20061126.html
Please update your package to 2.0.3.
Thanks.
--
Regards,
Hideki Yamane
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
reassign 324685 gtk2-engines 1:2.8.2-1
retitle 324685 No panel transparency with smooth engine
reassign 400394 gtk2-engines-pixbuf 2.8.20-3
retitle 324685 No panel transparency with pixbuf engine
thanks
Le samedi 25 novembre 2006 à 17:17 -0500, EspeonEefi a écrit :
On Wed, 2006-11-22 at 20:54
Package: libxdamage1
Version: 1:1.0.3-2
Severity: important
Tags: upstream fixed-upstream patch
libXdamage calls UnlockDisplay and SyncHandle without a matching
LockDisplay. This causes a locking correctness assertion failure with
libX11 1.1 and Xlib/XCB in experimental, and will become RC after
Dear maintainer of isoqlog and Debian translators,
On 19 nov 2006 I sent a notice to the maintainer of the isoqlog Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS (bug #312088).
I announced the intent to build and possibly upload a
Package: spamassassin
Version: 3.1.7-1
Severity: normal
This problem is similar to that reported in #333134, but is for the
current version in unstable. Spamassassin recommends
libmail-spf-query-perl and requires libsys-hostname-long-perl, but
neither is currently part of the .deb control file.
retitle 400412 ITA: spong -- A systems and network monitoring system --
server programs
owner Jan Wagner [EMAIL PROTECTED]
thanks
pgpB73pCmU8Hw.pgp
Description: PGP signature
On Fri, 24 Nov 2006 the mental interface of
Vincent Fourmond told:
Package: libasound2
Version: 1.0.13-1
Severity: normal
Hello !
I first would like to apologize, as this is the most vague bug report
I've ever sent. I hope it will tell something for you.
You are welcome ;)
Hi,
Le 25.11.2006 18:28:50, Goedson Teixeira Paixao a écrit :
Em Ter, 2006-11-21 às 20:03 +0100, Jean-Luc Coulon (f5ibh) escreveu:
Le 21.11.2006 16:03:08, Debian Bug Tracking System a écrit :
Thank you for the problem report you have sent regarding Debian.
This is an automatically
Package: gdm
Version: 2.16.1-1
Tags: l10n
Severity: minor
gdm failed to start on my system. I got two ncurses error dialogs on vt7
but the error messages in it are truncated (last line is missing). This
happens in a German environment where the German strings are probably
longer. I checked the
im-switch needs to have fall back so we can see it as a low level choice
I will close this bug in the upcoming release.
It is not an RC bug. I think gcin still can enter testing, is it not?
Gcin is waiting for m68k build, the 76th in the waiting list.
If I upload a new version now, then I have
Package: libxi6
Version: 1:1.0.1-3
Severity: important
Tags: upstream fixed-upstream patch
libXi has various Display locking correctness issues. These issues could lead
to deadlocks in Xlib; they trigger locking correctness assertions in libx11
1.1 with Xlib/XCB in experimental, and will become
Package: pload
Version: 0.9.5-3.2
Tags: patch
Currently, pload depends on libxaw6. Nothing in Debian other than pload still
needs libxaw6. I checked, and pload appears to build and run fine against
libxaw7; in fact, it looks like it might even run better, with improved widget
sizing. This
Package: logcheck-database
Version: 1.2.51
Severity: wishlist
I'm backup my ldap with slapcat (from package slapd) and get a entry in
syslog. Can you add to /etc/logcheck/ignore.d.server/slpad:
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ slapcat: bdb_db_init: Initializing BDB
database$
-- System
Package: imapproxy
Version: 1.2.4-5
Severity: minor
Hello,
debian/copyright says:
| Exception granted as of 15th March 2004 so that this software can be
| linked against OpenSSL libraries.
However this seems to be the only documentation of this license
exception. The copyright statements in the
Package: libxfixes3
Version: 1:4.0.1-4
Severity: important
Tags: upstream fixed-upstream patch
libXfixes calls UnlockDisplay without calling LockDisplay. This causes a
locking correctness assertion failure with libX11 1.1 and Xlib/XCB in
experimental, and will become RC after the etch release
Peter Eisentraut wrote:
Olaf van der Spek wrote:
Could you have ntp installed by default on a Debian install?
This is not up to the package maintainers. You need to talk to the
Debian installer group.
At #debian-devel LIW said the package maintainer had to ask ftp-master
to increase the
Package: linux-libertine
Version: 2.2.0-1
Severity: important
Tags: patch
Hi,
linux-libertine contains outdated information in the
linux-libertine.hints file for DeFoMa.
The attached patch fixes the issues.
Regards
Peter
-- Package-specific info:
Desired=Unknown/Install/Remove/Purge/Hold
|
reassign 400121 libpcre3
stop
The problem is in the libpcre which konqueror calls : the pcretest program
itself crashes.
[EMAIL PROTECTED]:~$ pcretest
PCRE version 6.7 04-Jul-2006
re /^(.)*$/
data Z... (a few thousand Z in a row)
Erreur de segmentation
Package: libx11-6
Version: 2:1.0.3-3
Severity: normal
Tags: upstream fixed-upstream patch
libX11's XKB and XIM support have several potential race conditions and
deadlocks for multi-threaded applications, due to missing or incorrectly
placed calls to UnlockDisplay or LockDisplay.
Package: live-package
Version: 0.99.14-1
Severity: minor
Tags: patch
Hi,
make-live download stuff from testing and not from
sid which is supposed to be the default in /etc/make-live. Patch that
susbstitutes sid with etch in the conf file is attached.
Thanks,
Riccardo Magliocchetti
---
On Nov 26, Martin Michlmayr [EMAIL PROTECTED] wrote:
Indeed, I read something about this on lkml a few days ago and it
seemed like hwclock would get patched to deal with /dev/rtcX.
OK then, I will only move the devices to audio group to match /dev/rtc.
--
ciao,
Marco
signature.asc
Package: cron-apt
Version: 0.4.10
Severity: important
Tags: patch
Dear One,
cron-apt seems to be broken in its latest release typo error in
/usr/sbin/cron-apt): /bin/sh has been replaced by /bin/hs :/
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Martín Ferrari wrote / napísal(a):
hi, I have just seen your reply today, sorry about the long delay.
I hadn't checked the code, so it seemed to me infinite. But,
nevertheless, is stupid to wait for a timeout when there is already an
error
On Sat, 25 Nov 2006 19:25:08 +0100, Holger Levsen [EMAIL PROTECTED]
said:
package: fai
version: 3.1.1
severity: important
Hallo Holger,
bitte nicht zwei bugs in einem Bug report submitten. Das ist schlecht
wenn wenn man nur einem Bug schliessen will. Ausserdem haette ich
Hi.
Looks like I've got the same issue.
Wine can't start anything on my system.
Part of log is below.
Looks like this build of wine somehow requires proper 3d subsystem. This is
bad - wine used to work on displays without 3d (e.g. on vnc).
[EMAIL PROTECTED]:~ rm -rf .wine
Invoking
Package: apache2.2-common
Version: 2.2.3-3.1
Severity: normal
*** Please type your report below this line ***
Today logrotate killed my apache. The last lines in error.log.1 are:
[Sun Nov 26 06:25:25 2006] [warn] child process 6244 still did not exit,
sending a SIGTERM
[Sun Nov 26 06:25:27
Hi,
I did some tests with FC6 without XEN support.
Here Fedoras FC6 boot configuration (without XEN support)
title Fedora Core (2.6.18-1.2849.fc6)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-1.2849.fc6 ro root=LABEL=/ rhgb quiet
initrd /boot/initrd-2.6.18-1.2849.fc6.img
-
Package: xmame-x
Version: 0.106-1
Severity: important
When I run xmame, get this error message and sound doesn't work. Last
version worked perfectly, I think.
David
-- System Information:
Debian Release: 4.0
APT prefers testing
APT
Package: qa.debian.org
Severity: normal
Hi,
Pmidi PTS page [1] is reporting wrong info about upstream release.
PTS page display this message:
uscan had problems while searching for a new upstream version: In
./debian/watch, no matching hrefs for watch line
http://www.parabola.demon.co.uk
Hello,
I explained when I sent the found command:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=388421;msg=17
I gather that I did not follow the proper procedure for re-opening
a bug. What should I have done?
Let me know if you need the full strace or anything else.
--
Miciah Masters
Package: mol-source
Version: 0.9.71.dfsg-4
Severity: important
Tags: patch
Please find attatched patch, which will enable mol-source to build
against 2.6.19 as well as the older ones.
Elimar
--
Experience is something you don't get until
just after you need it!
diff -ur
Package: initramfs-tools
Version: 0.85b
Severity: normal
Looks line postinst script of initramfs-tools package just runs
'update-initramfs -u'
This looks to update initramfs image for one of installed linux-image
packages, while keeping it as-is for all other packages. This could lead
to
* Marco d'Itri [EMAIL PROTECTED] [2006-11-26 01:09]:
I am having second toughts about this.
I agree with the hwclock maintainer, there is no point in having two
names for the same device: http://lkml.org/lkml/fancy/2006/3/29/334 .
Why can't hwclock be fixed instead?
Indeed, I read something
Package: coreutils
Version: 5.97-5.2
Severity: wishlist
Hi,
I would really like to have an option to sort by IP address (IPv4 and
IPv6). The existing solutions (e.g. -t. -n -k1,1 -k2,2 -k3,3 -k4,4)
are not really usable if the IP address is not the first field and are
also very clumbsy. Sorting
Package: sky2.c
Version: 1.5
Severity: critical
Tags: patch
Sky2 module available in Kernel =2.6.18.1 have a critical bug on
88E803X chips, made impossible send files to another computers:
http://bugzilla.kernel.org/show_bug.cgi?id=6839
Patch is available in:
Package: gettext
Version: 0.15-3
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It seems, the .gmo files are cleaned in the maintainer-clean target. But
they are created during make and so have to be cleaned in the
clean-target [1]. Otherwise they will never be updated except
Hi Thijs,
On Wed, Nov 22, 2006 at 10:52:34PM +0100, Thijs Kinkhorst wrote:
I'd like to request the approval of uploading a new upstream version of
phpMyAdmin, 2.9.1.1. I'm skipping one upstream version here (Debian
currently has 2.8.0.3) since I deliberately did not upload the newer
upstream
Package: libapache2-mod-auth-pam
Version: 1.1.1-6.1
Followup-For: Bug #394097
libapache2-mod-auth-pam _does_ work with latest apache, but doesn't fall
completely under the hood of AuthType Basic anymore (real reason is not clear
to me)
As long as mod_authn_pam isn't packaged with Debian, user
On Sun, Nov 26, 2006 at 11:18:47PM +1100, Vincent McIntyre wrote:
With the Tk.Blinkenlights it fails out pretty early, after a few
hundred messages. The virtual memory utilisation is about 230Mb when
it dies, on a host with 1Gb and about 2Gb swap.
I have been battling bugs in Python's TK
Hi,
since verion 0.7.1 pbbuttonsd checks for the current runlevel and
won't suspend the machine if a shutdown procedure is in progress.
I think this bug could be closed then. Benoît, would you confirm
this?
Best Regards
Matthias
Hi,
I just checked the brightness issue. The 10% step you
observed irritates me a bit. How did you measure this?
The brightness step in the display module is calculated
dynamically to have always 15 steps independently of the
underlying hardware.
With the PMU driver on my Pismo the maximum
A few select 1awyers found a loophole inside the banking system laws. With
this discovery, we've been successful at eliminating people's creditcarddebt
without them paying one more cent. WeGuarantee that we can help you with
this.
C0ntact us at
314 719 2803
This delayed and bothered them for a
Package: debian-goodies
Version: 0.26
Severity: minor
The script network-test cannot run without the package netcat (nc),
therefore there should be a Suggests: netcat in the debian/control
file.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable')
Hello,
i see two potential issues with radeontool:
1. the author is somewhat confused over the usage of mmap, there's
no need to malloc memory beforehand and then overmap it. in fact,
it's a very bad thing to do.
2. grsec has checks on what can be mmap'ed from /dev/mem, have you
Kurt Roeckx wrote:
On Sun, Nov 26, 2006 at 10:00:30AM +0100, Peter Eisentraut wrote:
Olaf van der Spek wrote:
Could you have ntp installed by default on a Debian install?
This is not up to the package maintainers. You need to talk to the
Debian installer group.
The debian installer group
As per http://www.mnogosearch.org/guesser/ I believe
[EMAIL PROTECTED] might be a working address for the upstream
maintainer.
The address is in cleartext on that page, so I'm not spamproofing it
here ...
Hope this helps,
/* era */
--
If this were a real .signature, it would suck less. Well,
Package: bmp-crossfade
Severity: important
Hello,
As bmp is dead in upstream, many people suggest removing it in favour of
audacious.
That's why I'd be happy to get all bmp plugins available for audacious
before starting transition...
Could you build this plugin against audacious?
Thanks in
[David Härdeman]
the attached patch changes the initscripts mtab script to not use an
extra fd when processing /proc/mounts. This makes SELinux happier as
the extra fds aren't leaked to the utils that are executed later.
Sounds like a good idea, but I would like to know if it affect the
tags 400086 moreinfo
severity 400086 important
thanks
On Thu, Nov 23, 2006 at 11:48:35AM -0800, Jacob Greenstein wrote:
iceweasel connects only to the default homepage (not cached).
Any attempt to connect with any other site afterwards makes it hang on
the DNS lookup stage or later. It can
Package: bmpx
Version: 0.32.0-1
Severity: important
Hi.
Launching bmpx without dbus installed (but libdbus) throws the following
error:
$ bmpx
process 18019: D-Bus library appears to be incorrectly set up; failed to
read machine uuid: Failed to open /var/lib/dbus/machine-id: No such file
or
Hi,
Is there any reason why this bug has not been fixed yet?
Would it possible to fix it?
Thanks in advance.
--
Jérôme Marant
Package: totem
Version: 2.16.3-3
Severity: normal
Hi,
When I play a .avi with a unicode subtitle, I can't change the font size in
full screen.
Thx for your work!
Guillaume
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386
Olaf van der Spek wrote:
Could you have ntp installed by default on a Debian install?
This is not up to the package maintainers. You need to talk to the
Debian installer group.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sat, Nov 25, 2006 at 09:01:14PM +, Calum Mackay wrote:
Package: fmit
Version: 0.96.5-1
Followup-For: Bug #385946
Crashing here too on startup:
CaptureThread: WARNING: ALSA: cannot set channel count to one. channels
will be mixed
Program received signal SIGSEGV, Segmentation
Package: xterm
Version: 222-2
Severity: normal
With version 222-2 I get the following error on post-installation of the
package:
Preparing to replace xterm 222-2 (using .../archives/xterm_222-2_i386.deb) ...
Unpacking replacement xterm ...
Setting up xterm (222-2) ...
ln: creating symbolic link
Package: rkhunter
Version: 1.2.9-2
Severity: wishlist
Tags: l10n patch
Dear rkhunter maintainer,
Here's Japanese po-debconf template (ja.po) file that
reviewed by several Japanese Debian developers and users.
Could you apply it, please?
--
Regards,
Hideki Yamane henrich @
close
On Fri, Oct 27, 2006 at 04:09:57PM +0200, David Schmitt wrote:
Hi Enver!
Hi David,
In preparation of the upcoming etch release, would you please
test if either 2.6.17-9 from testing or 2.6.18-3 from unstable
fixes your problem with your touchpad?
First of all, thanks for your
Package: rkhunter
Version: 1.2.9-2
Severity: minor
Tags: patch l10n
I have prepared a translation of the po-debconf template into German.
Please include it in debian/po.
Matthias
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (900, 'testing'), (50, 'unstable')
reassign 400449 xfonts-utils 1:7.1.ds.3-1
merge 400449 389085
thanks
On Sun, 26 Nov 2006, Bas Zoetekouw wrote:
Package: gsfonts-x11
Version: 0.20
Severity: normal
Setting up gsfonts-x11 (0.20) ...
warning: /usr/lib/X11/fonts/Type1 does not exist or is not a directory
warning:
Thanks for the suggestion, I will try disabling it and report back.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: smarteiffel
Version: 1.1-11
Followup-For: Bug #275846
Hi,
well what are the news about the smarteiffel 2.2 package ?
No progress visible. Still dealing with 1.1 ?
If you don't have time or skill, orphane the package.
This story is just unbelievable.
-- System Information:
Debian
Guillem Jover a écrit :
Hi,
On Sat, 2006-11-25 at 19:19:58 +0100, BERTRAND Joël wrote:
Package: dpkg
Version: 1.13.24
Architecture: sparc
Severity: grave
I have some SparcSTATION 20 with one or two SuperSPARC-II and 448 MB
of memory (thus, HIGHMEM is used). On these workstations, dpkg
Package: imapproxy
Version: 1.2.4-5
Severity: normal
Tags: patch
(SID)[EMAIL PROTECTED]:$ apt-cache show imapproxy | grep ^Pre
Pre-Depends: debconf (= 1.2) | debconf-2.0
Which is just wrong. This should be a normal Depends. The Pre-Depends
would only be necessary if imapproxy used deconf in the
Hello.
As it happens, shortly after the problems have been solved[1] for producing
the package of version 2.8, the new version of lilypond is out!
Best,
Gilles
[1] Although not yet for AMD64, it seems :-(
Hi,
This bug about new release was already reported as:
#399356.
Regards
--
On Sun, Nov 26, 2006 at 10:00:30AM +0100, Peter Eisentraut wrote:
Olaf van der Spek wrote:
Could you have ntp installed by default on a Debian install?
This is not up to the package maintainers. You need to talk to the
Debian installer group.
The debian installer group already said that
On Fri, Sep 29, 2006 at 07:39:26PM +0200, Petter Reinholdtsen wrote:
[Mario Holbe]
I personally think that something around 100k should suffice, but if
you like to have it somehow dynamic, I attached a small sample patch
which limits the size to one tenth of available memory.
Thank you
Package: fmit
Version: 0.96.5-1
Severity: grave
Justification: renders package unusable
Crashes on startup, every time. Different stack traces, examples below.
thanks much.
regards,
calum.
example 1:
CaptureThread: WARNING: ALSA: cannot set channel count to one. channels
will be mixed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Wed, 1 Nov 2006, Loïc Minier wrote:
This is a followup for Debian bug http://bugs.debian.org/359161.
On Mon, Mar 27, 2006, Taco IJsselmuiden wrote:
When trying to install a rpm-database in some dir using rpm --root, the
wrong dbpath is
Package: libmysqlclient15off
Version: 5.0.26-3
Severity: normal
Hi,
http://bugs.mysql.com/bug.php?id=24590
What is the purpose of those repeated calls?
Isn't setting the receive and send timeouts once (directly) after socket
creation not enough?
setsockopt(3, SOL_SOCKET, SO_SNDTIMEO,
Package: offlineimap
Version: 4.0.9
Severity: normal
*** Please type your report below this line ***
I can reproduce this, though not always at the same point in the transfer.
My setup is as follows
server: ms exchange 2000 version 6.0.6603.0
On the server I have two folders in the listed
On Wed, 15 Nov 2006 21:17:34 +0100 Francesco Poli wrote:
On Tue, 14 Nov 2006 11:11:04 -0500 Mathieu Malaterre wrote:
[...]
Could you please verify the bug report:
http://vtk.org/Bug/bug.php?op=showbugid=4041
And tell me if this is enough to fix your issue or does this need
some
hi Ludovic, thanks for the reply.
This is not the same bug.
Yes, Steve Langasek has just told me the same, and asked me to file a
new bug, which I have.
It is very strange, I tested today on my i386 with a Debian Unstable
updated with latests packages, and I didn't meet this problem.
Package: libudns-dev
Version: 0.0.8-1
Severity: important
Tags: patch
Including udns.h in a C++ source results in the following error, caused
by using the reserved word class in the C header file. Patch included below.
/usr/include/udns.h:700: error: expected primary-expression before
‘enum’
Hi,
I also can reproduce this bug.
The r300 driver causes a SIGSEV while running nexuiz.
This bug is 100% reproduceable by shooting the weapon Mortar
(just before the explosion).
I discovered that this problem is in libgl1-mesa-dri by running
nexuiz-sdl in gdb and getting a backtrace after the
Hi.
Thanks for the report.
Before I forward it upstram. Could you please tell me if you can still
reproduce using version 0.16 in experimental?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, 26 Nov 2006 10:57:11 +0100
Bill Allombert [EMAIL PROTECTED] wrote:
On Mon, Nov 20, 2006 at 02:15:20PM +0100, Tim Dijkstra (tdykstra) wrote:
Package: menu
Version: Patch to just fork and die, instead of waiting on a signal
Followup-For: Bug #374834
Hi,
I prepared a patch
Hi Frits,
On Wed, Nov 22, 2006 at 11:27:10AM +0100, Frits Daalmans wrote:
upgrade from etch-1-month-ago to 20061120 broke my X server,
solution found, still needs a good patch.
I think it should be reassigned to xserver-xorg?
No, your problem can't possibly be related to the problem
Package: wnpp
Severity: wishlist
Owner: Michael Biebl [EMAIL PROTECTED]
* Package name: liblazy
Version : 0.1
Upstream Author : Holger Macht [EMAIL PROTECTED]
* URL : http://www.freedesktop.org/wiki/Software_2fliblazy
* License : LGPL
Programming Lang: C
On Wed, Oct 04, 2006, Filipus Klutiero wrote:
The descriptions of the binary packages built from p7zip don't clearly
describe the packages. For example, p7zip's short description 7-Zip
is a file archiver with high compression ratio makes wonder ...OK, but
what is p7zip?. If there's no room for
Package: imapproxy
Version: 1.2.4-5.2
Attached the diff for the 1.2.4-5.2 NMU I just uploaded.
cu andreas
--
The 'Galactic Cleaning' policy undertaken by Emperor Zhark is a personal
vision of the emperor's, and its inclusion in this work does not constitute
tacit approval by the author or the
This bug is caused by debian/xterm.doc-base containing descriptions for
two documents. According to dh_installdocs, If your package needs to
register more than one document, you need multiple files. To accomplish
this, you can use files named debian/package.doc-base.*
Therefore, to fix this
I was not the translator, but I'm updating the translation. The
most important thing is that I converted it from ISO-8859 to UTF8. And,
of course, attached (and gzipped) you will find the Brazilian Portuguese
translation for twig po-debconf. It is UTF-8 encoded, tested with
msgfmt (2t)
tags 267385 - l10n
thanks
Though related to locales, this bug is not a *localization* bug
strictly speaking. Having it tagged this way messes up the work in
tracking down old localization bug reports.
--
signature.asc
Description: Digital signature
On Sun, Nov 26, 2006 at 11:53:13AM +0100, Yann Dirson wrote:
Package: ifupdown-extra
Version: 0.3
Severity: wishlist
As long as this package wants me to replace host with the much-restrictive
bind9-host, I'm highly unlikely to install it :)
I believe it should work with host, I'll update
On Sun, 26 Nov 2006, Frans Pop wrote:
On Sunday 26 November 2006 02:13, you wrote:
Could you please also test that whether Vista boots if you remove
/pagefile.sys after ntfsresize? You can use ntfs-3g for this, it's in
Debian unstable. Usage: http://www.ntfs-3g.org/index.html#usage
Or
tag 399440 +pending
thanks
Hi,
as per doko's suggestion, the NMU with attached diff is on its way. As
this there are two NMUs pending for maintainer confirmation, I'm CCing
2.1's NMU bug log.
Kind regards
T.
--
Thomas Viehmann, http://thomas.viehmann.net/
diff -u
On Sunday 26 November 2006 10:26, Todd A. Jacobs wrote:
This package is (or should be) recommended by spamassassin. However, it
fails to initialize as follows:
[...]
Nov 26 01:20:55 penguin spamd[32583]: plugin: failed to create instance of
plugin Mail::SpamAssassin::Plugin::DKIM: Can't
Package: imapproxy
Version: 1.2.4-5
Severity: serious
Justification: Policy 7.2
The init-script contains:
. /lib/lsb/init-functions
but the package does not depend on lsb-base.
As I am going to NMU for #399362 I'll fix this bug, too.
cu andreas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
On Thu, Nov 09, 2006, Jason Spiro wrote:
When 7z runs out of disk space during an uncompress operation, it says:
ERROR: E_FAIL
I wish it said Out of disk space. That way I would immediately know
why it failed.
Arg, that's a bad p7zip boy :) Thanks for noticing.
It is definitely a bug.
If I might add a bit of info here since I suspect that Jeremy hit the
same problem that I did when I had very similar signs after doing a
dist-upgrade yesterday, it seems that the IfDefine SSL gates in the
v. host ( elsewhere) configs need to be changed to IfModule
ssl_module. When I did that
1 - 100 of 340 matches
Mail list logo
