Here's the nature of the problem:
I go through the Access, Update, and Install steps of dselect. Access
works fine, Update works fine, but on Install I get this message:
-- cut here --
Usage: mount [-hV]
mount -a [-nfFrsvw] [-t vfstypes]
mount [-nfrsvw] [-o options] special | node
Johann Spies wrote:
>I got this message after recompiling my kernel and I cannot find out what
>is causing it. I have a single computer that uses a dialup ppp connection
>to the ISP.
>
>Before the error message in the subject line there were two other error
>lines:
>
>request_modul
I got this message after recompiling my kernel and I cannot find out what
is causing it. I have a single computer that uses a dialup ppp connection
to the ISP.
Before the error message in the subject line there were two other error
lines:
request_module[block-major-22]: root fs not mounted
VFS:
On Fri, 25 Jun 1999, Mario Olimpio de Menezes wrote:
> Under your 'some other options', make sure you include:
>
> option routers xxx.xxx.xxx.xxx; # This default gateway passed to clients
> option subnet-mask xxx.xxx.xxx.xxx # The subnet mask passed to clients
Yes, I did this.
On Fri, 25 Jun 1999 16:47:29 -0400 (EDT), William T Wilson
<[EMAIL PROTECTED]> wrote:
>If you want to change the permissions of the volume's / directory, change
>them with chmod once it's mounted.
Under normal circumstances that would merely be an annoying
inconvenience, but since the filesyste
Subject: vpn(?) and firewall
Date: Fri, Jun 25, 1999 at 11:21:43AM -0500
In reply to:Gregory Merchan
Quoting Gregory Merchan([EMAIL PROTECTED]):
> I'd like to use my old 486 box as a firewall.
>
> Here are my questions:
>
> 1) It's a 33MHz with 8Mb RAM, can it do the job? There
On Fri, 25 Jun 1999, Gertjan Klein wrote:
> Unfortunately, the filesystem ext2 recognises neither the gid= nor the
> umask= options, and refuses to mount! I can find no similar options for
Those options are only valid for MS-DOS and other filesystems which do not
have provisions for permission
On Wed, 23 Jun 1999 16:14:04 -0500 (EST), Brian Servis
<[EMAIL PROTECTED]> wrote:
>mount -t ext2 /dev/hda6 /test -o suid,gid=,umask=002
Unfortunately, the filesystem ext2 recognises neither the gid= nor the
umask= options, and refuses to mount! I can find no similar options for
ext2. I really
How do I get Xemacs to colorize/facerize HTML tags in psgml mode?
I did M-x sgml-mode, M-x set-variable, and set sgml-set-face to '1' as specified
in the psgml doc files, but html files are still quite normal looking:(.
Any idea?
Thanks!
Tim
--
E-Mail: Timothy Hosp
On Fri, 25 Jun 1999, Nathan E Norman wrote:
> As a (busy) mirror maintainer, I can assure you that you are wrong.
> Most users get packages from the mirrors, and the mirrors aren't going
> to split off new hostnames. The distinction is an "official" one, made
> on the "official" debian server(s)
I have a Sound Blaster PCI128 card which works Ok with NT
but I have be unable to get it working under Debian Linux
2.1. I compiled the kernel correctly I think, I get the
Sound initialization started
Sound initialization complete
message, but nothing in between.
cat /dev/sndstat gives the card c
On Thu, 24 Jun 1999, Wyn Snow wrote:
[ snip ]
: I suspect that putting contrib and non-free on a different server
: will make it harder for newbies like myself to get packages with
: apt and harder in general to find things. If that's correct, I
: think a different approach to making a clear
>> "Chad" == Chad A Adlawan <[EMAIL PROTECTED]> writes:
Chad> does anyone know of a way to change the default "useradd" or
Chad> "adduser" behaviour in terms of giving permissions to the new
Chad> users home directory ? that is, when u add a new user, the
Chad> permission on his/her new home dir
I've installed egcc as in potato, I get this error message, while
trying to compile linux:
[EMAIL PROTECTED]:/usr/src/linux # make xconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts kconfig.tk
make[1]: Entering directory `/scratch/usr/src/linux-23/scripts'
gcc -Wall -Ws
>Resent-Cc: recipient list not shown: ;
>X-Envelope-Sender: [EMAIL PROTECTED]
>Date: Fri, 18 Jun 1999 15:02:02 +0200
>From: Jean-Philippe Gu?rard <[EMAIL PROTECTED]>
>Content-Type: text/plain; charset=iso-8859-1
>Resent-From: debian-user@lists.debian.org
>X-Mailing-List: archive/latest/53589
>X-Lo
I don't know if this is relevant, but I also got reboot on
the thirteenth dot of "Loading linux". I ended up using the
tecra boot images which got me past this particular problem.
My whole saga is in:
"Linux on a Fujitsu 280dx"
http://www.wam.umd.edu/~zben/Linux/fuji200.html
--
Charles B. (Be
Is there shh binary debian2.0 ( kernel-2.0.36) package?
If so, where I could find it?
Please send the answer to [EMAIL PROTECTED]
Thanks in advance,
Jan
On Fri, 25 Jun 1999, Dpk wrote:
> On Fri, 25 Jun 1999, Mario Olimpio de Menezes wrote:
>
>Hi,
>
> I tried to setup the dhcp-beta (server) under slink. The machine
>has two interfaces. I would like to serve only one, say eth1.
> I edited the dhcp.conf file, the server w
On Fri, 25 Jun 1999, Andrew Holmes wrote:
> I've looked through the man pages for splay and mpg123 but I can't find an
> option to output the trackname information from an mp3 file.
Have a look at the 'mp3info' package (which gives you the command
'mp3info'). That should do everything you need. I
*- On 25 Jun, Alex McCool wrote about "cdrom and mnt directories"
> How does one create new mount point directories?
> I have three CDROM drives I want to share via samba, but only one cdrom
> directory.
>
There is nothing special about the 'cdrom' directory. You can mount
your cdrom over the /f
Hi,
I've looked through the man pages for splay and mpg123 but I can't find an
option to output the trackname information from an mp3 file.
I have quite a few mp3 files with unhelpful filenames, I want to write a
script to rename all the files according to the names of the groups and song
names b
On Wed, 23 Jun 1999 16:23:08 -0500 (EST), Brian Servis
<[EMAIL PROTECTED]> wrote:
>*- On 23 Jun, Brian Greenfield wrote about "apt 0.3.7 breaks dselect?"
>> Hi
>>
>> I've just installed apt 0.3.7slink0 from netgod.net and I
>> can no longer use the apt method of dselect. Update and
>> Select work
> 1) It's a 33MHz with 8Mb RAM, can it do the job? There will be two other
> machines (Win98, Debian G/L) on my home network.
Yes, but you'll be much happier if you spend $20 and buy more RAM
> 2) How do I physically set this up? I've found info on the software
> setup, but nothing about hardwar
How does one create new mount point directories?
I have three CDROM drives I want to share via samba, but only one cdrom
directory.
TIA
Alex
Hey all,
I'm using potato/slink mix all base files and libs are potato. Apps are a
mixture. Anyway, I use WindowMaker and have no other window manger installed
nor do I plan to. There are some gnome app that I like and want to try but
am find problems with some. gnome control panel works - althoug
On Fri, Jun 25, 1999 at 03:56:31PM +0200, Bruno Boettcher wrote:
> does anybody has a working config file for this card? XF86Setup segfaults, and
> with the result of xf86configure i get only a splitted screen in 640x400
Not sure, but that chipset may not be supported yet.
http://www.xfree86.
I always have to enter commands like "gnome-terminal -e minicom"
in the GNU menu editor instead of simply activating "Run in Terminal",
since GNOME seems to use "xterm" to start applications.
How can I tell GNOME to use "gnome-terminal" instead of "xterm"?
I want to get the most out of my text console screen real estate. I am
wondering
about what is the smallest console cont for linux that can be implimented with
something easy like setfont. Currently I am using gr8x6 however I think that
that is still too big for my screen. Any help would be ap
On Fri, 25 Jun 1999, Mario Olimpio de Menezes wrote:
Hi,
I tried to setup the dhcp-beta (server) under slink. The machine
has two interfaces. I would like to serve only one, say eth1.
I edited the dhcp.conf file, the server was started but the
clients couldn't get
I'd like to use my old 486 box as a firewall.
Here are my questions:
1) It's a 33MHz with 8Mb RAM, can it do the job? There will be two other
machines (Win98, Debian G/L) on my home network.
2) How do I physically set this up? I've found info on the software
setup, but nothing about hardware. Mor
Howdy,
I believe this question has been asked before but I couldn't find it
in the archives.
I'm trying to install debian on a Compaq 2500 with multiple scsi disks.
The first disk contains a small Compaq-specific partition and an
NT server partition. The second disk contains Debian. I installed
RE: Subject: dselect and contrib/non-free - DWN-6/22
> > Wichert Akkerman has proposed splitting non-free and contrib out to a
> > new server, nonfree.debian.org. The impetus for this is to emphasize
> > that they are not part of Debian, since "the distinction isn't as
> > visible as it used to be;
Hi,
I just upgraded my kernel from 2.2.6 to 2.2.10. And my soundblaster
stopped working since. When it boots up and started londing the
sb module, it produced the following error:
init_module: resources busy.
Any ideas??
Thanks.
Shao.
--
___
Hi,
I tried to setup the dhcp-beta (server) under slink. The machine
has two interfaces. I would like to serve only one, say eth1.
I edited the dhcp.conf file, the server was started but the
clients couldn't get dynamic IPs. Both, Win98 and Linux clients.
The conf file ha
Isabelle Poueriet writes:
> I only have the base system installed.
Then you have pppconfig.
> ...I get some garbage text on my screen,...
That is pppd sending LCP packets to the console. This what it will do when
you start it without telling it what serial port to use. The only place
you have
Brad wrote:
> On Wed, 23 Jun 1999, Frank Barknecht wrote:
>
> > [EMAIL PROTECTED] hat gesagt: // [EMAIL PROTECTED] wrote:
> >
> > > What if /etc/environment comprised of a series of variable=value
> > > statements
> > > that each shell would read and use to set the environment?
> >
> > I would li
*- On 25 Jun, John Foster wrote about "Re: Potential solution to netscape
crashing?"
> ___
> I have a true type server also, and I am curious: should the font path
> lines in /etc/X11/xfs/config match exactly those in /etc/X11/XF86Config
> ?? Includi
Geordy Korte wrote:
>
> > [never ending netscape crash discussion]
> > >
> > >>
> > >> > I'm using Netscape Communicator with RedHat 6.0 on my box and it just
> > >> > dies
> > >> > anytime it has to view a Java applet. Is there any work-around for
> > >> > this?
> > >> How
> > >> > about insta
as the title says
does anybody has a working config file for this card? XF86Setup segfaults, and
with the result of xf86configure i get only a splitted screen in 640x400
i am using potato thus i have XFree3.3.x
--
ciao bboett
=
Hey All,
I just downloaded RealProducer from Download.com. I untared and placed it in
the appropriate location and read the readme and did what it told me to do.
But, it doesn't run. I'm using potato and have recently install java1.2pre
from blackdown.org. I think this may be the problem? Is anyon
Thanks, bedankt, merci, gracias, xie xie. It worked, but alas the header of
the MP3 file was corrupted, so even Sox couldn't help out here. -- Hans
At 04:18 PM 6/24/99 +0200, Remco van 't Veer wrote:
>The following will create "a.wav" from "a.mp3".
>
> mpg123 -s a.mp3 | sox -t raw -r 44100 -w -
On 25-Jun-99 Christian Dysthe wrote:
> Please post a solution to the list. I have spent a lot of time
> trying to make fetchmail/exim 3.02 work, but no go. I rely on my MUA's pop
> abilities right now.
The author of Exim says it is an ipv6 issue and he is looking into it now.
--
Andrew
I run a potato system an came over this while upgrading vi apt, in
the configure phase:
S
syntax error at /usr/lib/xaw-wrappers//XawWrapper.pm line 42, near ");"
syntax error at /usr/lib/xaw-wrappers//XawWrapper.pm line 57, near ");"
BEGIN failed--compilation aborted at /usr/sbin/update-xaw-wrappe
Frankie writes:
> What I am about to say probably isn't appropriate to a newbie, but
depending on your
> competence it may be useful, or you may remember this a few months down
the line...
> In my experience this seems to speed up my computer by about 40 to 50%
when I am
> running lots of apps
On Tue, Jun 22, 1999 at 05:05:33PM -0400, Wayne Topa wrote
> - Forwarded message from Wayne Topa <[EMAIL PROTECTED]> -
>
> Date: Tue, 22 Jun 1999 17:02:36 -0400
> From: Wayne Topa <[EMAIL PROTECTED]>
> To: Anthony Campbell <[EMAIL PROTECTED]>
> Subject: Re: New windows
> Reply-To: [EMAIL P
On Fri, 25 Jun 1999, Michael Meskes wrote:
Is there a tool that allows me to transform MP3 files back to WAV?
Michael
P.S.: Please CC me on your answer since I'm not subsribed here.
If you are not subscribed it might be beneficial to check the
mailing-list archives, as many a ti
Mario Jorge Nunes Filipe wrote:
>
> Max wrote:
> >
> > Did you make sure that you have an entry like
> >
> > tapetype DAT
> >
> > before all the tapetype definitions. Also, you should have a line
> > that says something like
> >
> > tapedev "/dev/nst0"
> >
> > If this doesn't help, e-mail me your
Dselect automatically asks for the first or second cd as it needs it
when installing programs. At least that has been my experience. You
have to choose 'multi cd' in 'access.'
hth,
kent
Aaron Solochek wrote:
>
> I'm attempting to install stuff using dselect off the double cd image
> that I d
I tried to install a Debian system on a Fujitsu B110 without success.
I use the resc1440-safe.bin Disk form the slink dir and the notebook
restarts while loading the the kernel
`Loading root' works but then after the 13th point of
`Loading linux' it restarts the notebook.
The Linux on Laptops pa
Use the -X switch.
On Thu, Jun 24, 1999 at 20:06, Daniel Barclay wrote:
> > From: David Wright <[EMAIL PROTECTED]>
>
> ...
> > Well there's also the concept of an Alternate Screen in xterm. That's
> > why you don't see, for example, the last screenfull of output from
> > less when you quit, but
I just downgraded to 2.11. Reinstated my old exim.conf, and everything is back
to normal working order.
So, guess it will not be 3.02 on my box until this is fixed.
On 25-Jun-99 Pollywog wrote:
>
> On 25-Jun-99 George Bonser wrote:
>>
>> Hmm, looks like you have enabled ipv6 support in some thi
Hi everyone!
My problem is that I have a Linux computer without CD, and a Lost98 with a 32x.
I don't want to change anything in the hardware config, so I tried to connect
the 2 computers with FastLinx (a DOS program to connect 2 computers via COM or
LPT). It worked fine until I used it on the L
On Thu, 24 Jun 1999, Attila Csosz wrote:
> I'd like to refer to my computer not only as localhost but
> mycomputer.mydomain.com also. I've installed the bind package because of some
> reasons. I'd like to solve this with it. I studied it the named.local file
> seems to be good to do that. How c
I'm running Debian/Linux "potato" kernel 2.2.10 with Samba 2.0.4b and I'm
trying to setup a Linux box to masquerade and allow browsing across the
Linux box. Currently, IP Masquerading is working and I'm using the default
Debian auto-configuration. More specifically, I want the machines on the
loc
Hi Isabelle
I had this error. I did not have the last line of my negotiation
right. You will need to know what your isp expects to be told to
start the negotiation to set up a ppp connection. If the ISP isn't
sent the signal to commence negotiating, your ppp thinks the ISP
isn't 8 bit clean, and
Hi *,
I'm trying to get all the features of a ThinkPad 600E to
work with Debian potato.
What I have:
- all my PCMCIA-cards (xircom, fritz, adaptec) work
- sound (cs4232) works
- X (neomagic, 16bit) works
What I want:
- serial interface is detected but cannot be used
- irda-port?!
- internal mo
Is there a tool that allows me to transform MP3 files back to WAV?
Michael
P.S.: Please CC me on your answer since I'm not subsribed here.
--
Michael Meskes | Go SF 49ers!
Th.-Heuss-Str. 61, D-41812 Erkelenz| Go Rhein Fire!
Tel.: (+49) 2431/72651 | Us
Revenant:
Great that you should contribute back to the liet! congratulations.
The package you mention is WABI, "Windows Application Binary
Interface" or something like that, it is commercial, and as I recall
it only works for 3.1 applications. It has been a long time since I
looked.
This is the
Has anybody ever extracted the $1999 or whatever from anybody who has
spammed this list?
frankie
--
,-.
> Frankie |Drum'n'Bass tunes, samples and links. <
> [EMAIL PROTECTED] | http://ww
Will Lowe wrote:
> > floppy. The only thing i can think of is keeping them on the second
> > drive while the first drive makes the conversion to linux, then im
> > hoping that in linux i can still access the non-linux second drive,
> Sure. Linux can read disk drives that have been formatted unde
Max wrote:
>
> Did you make sure that you have an entry like
>
> tapetype DAT
>
> before all the tapetype definitions. Also, you should have a line
> that says something like
>
> tapedev "/dev/nst0"
>
> If this doesn't help, e-mail me your amanda.conf file and I'll see if
> there are any obvi
> [never ending netscape crash discussion]
> >
> >>
> >> > I'm using Netscape Communicator with RedHat 6.0 on my box and it just
> >> > dies
> >> > anytime it has to view a Java applet. Is there any work-around for this?
> >> How
> >> > about installing a Java VM? Anything would help. I want
Hi,
I user two syncppp isdn interfaces ippp0 and ippp1 for dialin at the ISP
(ippp0) and my office (ippp1) respectively.
The first one works fine.
When I ping the ip address for ippp1 dialing works, but the
/etc/ppp/ip-up script is not executed so there is no network setup with
the new IP address
I'm attempting to install stuff using dselect off the double cd image
that I downloaded and burnt from debian.org. I have no idea how to do
this. I put the second cd in first, and had it scan to look for the
files it wanted, but I don't know when or how to put the other cd in.
Is there a apge tha
Hello everyone. I'm sorry to post this again, but I'm having new problem
now.
I made some changes to those files I sent before and now when I type pppd
at the command prompt I get some garbage text on my screen, and after a
little while(30 seconds or so) I get the prompt back.
I tailed d my /v
My kernel is a 2.2.9.
dmesg gives the following error message:
--
ide-scsi scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: RICOH Model: CD-R/RW MP7040A Rev: 1.1j
Type: CD-ROM ANSI S
Cdrecord can write multisession CD's. I want to use that function for
making backups on a RW CD. My problem is that after such a backup, I can
only read the first file that was written on to the CD and not any other.
Is there anybody who do write multiple data-sessions using cdrecord?
I would l
unsubscribe [EMAIL PROTECTED]
--
http://reidster.dhs.org
Sounds like a permissions problem. If you moved your 'dden' directory
while logged in as root, it is possible that it is now owned by root and
as user dden you dont have access to it.
Can you do an `ls -la /home` and email the result?
or alternatively you could try this...
1. log in as root
2. c
On Friday, June 25, 1999 at 12:40:33 +1000, Revenant wrote:
> Message-ID: <[EMAIL PROTECTED]>
> X-Mailer: Mozilla 4.08 [en] (Win98; I)
> X-UIDL: 9569986813774c33b6403a623e7a5f5b
> I configured PSAUX in XF86Setup. This worked before I deleted the
> How do I kill gpm and try again?
You appear
Try MySQL. It's a free database server. It is supported by Linux.
got to www.mysql.org. You 'll also need DBI. Sounds like a good
Perl/MySql project. You can also download DBI from the web. Check out
www.perl.org and search for DBI. You'll also need a MySQL module. You'll
find all the info
On Thu, 24 Jun 1999, David Densmore wrote:
> When I try to login to my normal user account I get this message:
>
> Unable to cd to "/home/dden"
>
> I can still log in as root, but I don't know how to fix the problem.
> I used the adduser command to create a new account and couldn't
> get into th
rathon wrote:
> Hi,
>
> I installed the Xserver for this Matrox Millennium using the
> xserver-svga_3.3.3.1-2_i386
rathon's x.log says:
XFree86 Version 3.3.2 / X Window System
This is your problem here... I'd say that the svga server v3.3.3.1 that
you said you installed is not being used, t
Please post a solution to the list. I have spent a lot of time
trying to make fetchmail/exim 3.02 work, but no go. I rely on my MUA's pop
abilities right now.
Right now exim 3.02 and fetchmail is a no go combo.
TIA.
On 25-Jun-99 Pollywog wrote:
>
> On 25-Jun-99 George Bonser wrote:
>>
>> Hmm,
On 25-Jun-99 George Bonser wrote:
>
> Hmm, looks like you have enabled ipv6 support in some things but not
> others. ;)
It looks as though I will have to stick with version 2.11 of Exim, or else
build from source instead of a Debian package, so that I can keep the ipv6
stuff out.
--
Andrew
On 25-Jun-99 George Bonser wrote:
>
> Hmm, looks like you have enabled ipv6 support in some things but not
> others. ;)
YES :) It looks that way, but I did not do that. I will look at the docs to
see if perhaps I did so in error and how I might fix that.
I have returned to version 2.11 until
Hi,
too funny! Right after I posted this I upgraded to exim 3.02. AFTER the upgrade
dselect gave me this message:
Important! Exim configuration file format has changed!
==
Your old configuration file has been renamed to /etc/exim.conf-pre-v3. An
I configured PSAUX in XF86Setup. This worked before I deleted the
device. I don't understand what you mean by "What says the driver?".
How do I kill gpm and try again?
Thanx.
Robert Pintarelli wrote:
> On Thu, Jun 24, 1999 at 07:05:53PM +1000, Revenant wrote:
> > I've now tried this and it did
> From: David Wright <[EMAIL PROTECTED]>
...
> Well there's also the concept of an Alternate Screen in xterm. That's
> why you don't see, for example, the last screenfull of output from
> less when you quit, but just your interactive commands. less uses
> the alternate screen, and you can switch
*- On 25 Jun, Revenant wrote about "Re: I need some info/piece of mind before
installing linux"
>
> I believe there is a UNIX win emulator called WAPI, but it's commercial
> and I don't know how much it would cost.
It's WABI.
There is also VMware(www.vmware.com) which is an amazing piece of
sof
After upgrading to Potato and Dosemu 0.98.1-7, the latter fails with the
following message:
ERROR: slang_keyb_close(): failed to restore keyboard termios settings!
This happens when starting from the console or under X.
The only change was the upgrade itself and the updating of the new co
Hi,
one thing I would like to see is some kind of "warning" when a package that can
be upgraded using dselect if the upgrade means the software needs to be
majorly reconfigured after the upgrade.
An example would be if for instance program-x could be upgraded and
/etc/program-x.conf would have t
This is what Fetchmail says:
~$fetchmail
1 message for shadypond.com/pollywog at mercury.he.net (4589 octets).
reading message 1 of 1 (4589 octets) .fetchmail: SMTP connect to localhost
failed
fetchmail: SMTP transaction error while fetching from mercury.he.net
fetchmail: Query status=10
If this
On 24-Jun-99 Sebastian Canagaratna wrote:
> I had the same sort of problem
> Did you run eximconfig?
> The .fetchmailrc should also have a line
> mda "/usr/lib/sendmail -oem $USER" or something like that:
> do a man fetchmail
>
> My problem was that that it fetched the mail but would not deliver
I had the same sort of problem
Did you run eximconfig?
The .fetchmailrc should also have a line
mda "/usr/lib/sendmail -oem $USER" or something like that:
do a man fetchmail
My problem was that that it fetched the mail but would not deliver
it to me. Your problem may be a little more serious. In t
Mounting an MS-DOS filesystem should work - I was doing that until I
realised you could do VFAT. You'll just be without your
long filenames.
There is a Windows 'emulator' called "WINE" for Linux but it's not 100%
reliable and is still listed as a developer's-only alpha release to the
best of my k
On Thu, Jun 24, 1999 at 10:16:31PM +0200, Martin Bialasinski wrote:
>
> >> "KS" == Kevin Septor <[EMAIL PROTECTED]> writes:
>
> KS> program pops up allowing you to choose between tasks or profiles
> KS> and it then passes that info on to dselct so that you don't have
> KS> to tool around with 200
I cannot get Fetchmail to deliver mail now that I upgraded Exim to 3.02.
The problem is with Exim or my DNS but I cannot figure out how to fix this.
Any ideas?
1999-06-25 00:41:27 connection from [:::127.0.0.1] refused
(:::127.0.0.1 does not match any IP address for localhost)
1999-06-25 0
On Thu, Jun 24, 1999 at 07:05:53PM +1000, Revenant wrote:
> I've now tried this and it didn't work. The drivers reappear, but when
> I configure the mouse in XF86Setup the pointer refuses to respond.
>
> Does it make a difference that it is a PS/2 mouse?
>
> Thank you.
>
what says the driver,
> From: David Wright <[EMAIL PROTECTED]>
...
> Well there's also the concept of an Alternate Screen in xterm. That's
> why you don't see, for example, the last screenfull of output from
> less when you quit, but just your interactive commands. less uses
> the alternate screen, and you can switch
Gentleman Loser wrote:
> I guess all in all im fine with just blazing over my hard drive with
> linux, but i really want to keep my mp3 files, text/doc/wri files, my
> webpage, and real audio files. If you could only tell me one thing it
> would be how i could carry these things over to linux. I
Hi,
Except for people who try to understand
the workings of computers, most computer users
treat them as a tool. They learn how to use their applications,
maybe to only 1/10th of capability, but enough for
what they want to do.
How many car drivers will do a full overhaul
on the e
rathon wrote:
>
> Hello,
> I never got a response for this request. Sorry for re-posting one more
> time.
> Rathon.
I have the same card and I'm using version 3.3.3 of X and the G200 is
supported. To upgrade place the following in your sources.list file is
/etc/apt/:
deb http://ftp.netgod.net x/
93 matches
Mail list logo