Hello everyone,
since a recent update on a Debian sid system, most X applications fail
to start and get killed by the kernel due to a null pointer exception.
The frame of the application window blinks shortly, then the application
gets killed, eg:
Aug 07 21:25:14 glaurung kernel: BUG: kernel NULL
On Sat, Aug 19, 2017 at 10:19:59PM +0200, Alle Meije Wink wrote:
> I have a home theatre PC with an AMD A6-3500 APU. Bit of an oldie but still
> plays everything fine. The drivers supplied by the Jessie repositories
> (including fglrx for hardware acceleration) worked fine.
>
> But then I upgraded
Hi Alle,
the 4.9 kernel already has amd graphics support, but it needs firmware,
others do not have to(perhaps mesa, opengl, opencl). The X window must be
on the radeon driver.
If I were upgrading then I would always install a new one and switch
off the old(or will be secondary hdd :)
(Even if I
I'm running 4.11
Got a bit further by removing the MESA libraries for GLX support. That
removed many graphics applications and libraries. Then added
xserver-xorg-core again and now X starts again.
Some work to do because my (wireless USB) keyboard is not recognised in the
x session but that shoul
And what kind of kernel is installed 4.9 or 4.11?
Check the kernel log to see if the firmware has been loaded.
>>
I have a home theatre PC with an AMD A6-3500 APU. Bit of an oldie but still
plays everything fine. The drivers supplied by the Jessie repositories
(including fglrx for hardware acceler
I have a home theatre PC with an AMD A6-3500 APU. Bit of an oldie but still
plays everything fine. The drivers supplied by the Jessie repositories
(including fglrx for hardware acceleration) worked fine.
But then I upgraded to Stretch and suddenly started without X. The debian
supplied drivers don
Some experiences with squeeze on a laptop.
0) The problems below are (at least for me) tricky to debug. I'm
asking for hints
on how to obtain more information about what goes on so that I can make a
formal bug report.
1) I'm experiencing some bugs with X on a laptop, either at wakeup or suddenly
On Fri, 22 Jun 2007 05:30:11 +0200
Zach <[EMAIL PROTECTED]> wrote:
> On 6/21/07, Kamaraju S Kusumanchi <[EMAIL PROTECTED]>
> wrote:
> >
> > To enable hardware acceleration, In the "Module" section of
> > xorg.conf you should load "dri". So the corresponding stanza
> > in /etc/X11/xorg.conf will lo
On Thu, Jun 21, 2007 at 11:20:20PM -0400, Zach wrote:
>
> What does the mode indicate? Could that be the problem? Maybe the game
> I played was misdetecting, is there a quick way to verify that
> hardware acceleration is working?
on my rig:
[EMAIL PROTECTED]:~$ grep -i dri /var/log/Xorg.0.log |
On 6/21/07, Kamaraju S Kusumanchi <[EMAIL PROTECTED]> wrote:
To enable hardware acceleration, In the "Module" section of xorg.conf you
should load "dri". So the corresponding stanza in /etc/X11/xorg.conf will
look like
Section "Module"
# bunch of load statements here
Load "dri"
# bunch of
Zach wrote:
> I remember when I had my old Nvidia card I could use 'nv' or
> 'nvidia' driver to get hardware acceleration working. Any idea how to
> do so for my ATI card?
>
To enable hardware acceleration, In the "Module" section of xorg.conf you
should load "dri". So the corresponding stanza i
On Thu, Jun 21, 2007 at 04:58:06PM -0400, Zach wrote:
> On 6/21/07, Andrew Sackville-West <[EMAIL PROTECTED]> wrote:
> >
> >first thing I'd do is very closely read the xorg.conf and
> >/var/log/Xorg.0.log generated by *each* system and look for critical
> >differences.
> >
> >It could be something
On 6/21/07, Andrew Sackville-West <[EMAIL PROTECTED]> wrote:
first thing I'd do is very closely read the xorg.conf and
/var/log/Xorg.0.log generated by *each* system and look for critical
differences.
It could be something as simple as the dpi setting, for example. It
could also be a theme thin
On Thu, Jun 21, 2007 at 04:43:06PM -0400, Zach wrote:
> Greetings,
>
> I recently tried out a fairly recent Ubuntu boot CD (just to test it -
> no plans on switching from Debian which I love) and was surprised to
> see that my X desktop looked so much better: it was brighter and even
> in the gnom
Greetings,
I recently tried out a fairly recent Ubuntu boot CD (just to test it -
no plans on switching from Debian which I love) and was surprised to
see that my X desktop looked so much better: it was brighter and even
in the gnome-term and xterm I tried the fonts seemed better contrast,
more c
On Friday 05 May 2006 00:37, Bill Thompson wrote:
> On Thu, 4 May 2006 15:37:58 +0100
>
[snip]
> It has been said many times; If you can not afford to deal with problem
> like this DO NOT use unstable. From the comments above I can only
> assume that you do not understand the Debian release method
Toshiro wrote:
> Well, that's what you say, but the fact is that all the major problems I've
> ever experienced with sid were always related to x-server; their performance
> looks very poor to me.
This just indicates that you haven't used sid long enough. After you've
used it ten years, you will
On Thu, May 04, 2006 at 04:50:10PM -0700, Bill Thompson wrote:
> On Thu, 04 May 2006 12:41:11 -0300
> [EMAIL PROTECTED] wrote:
>
> > I don't think we should blame all Debian developers. The only real
> > problems I've had with sid were related to x-server; all other parts
> > of Debian are roc
On Thu, May 04, 2006 at 09:15:09PM -0300, Toshiro wrote:
> > > I don't think we should blame all Debian developers. The only real
> > > problems I've had with sid were related to x-server; all other parts
> > > of Debian are rock solid. Maybe the x-server Debian maintainers are
> > > new/unexperien
> > I don't think we should blame all Debian developers. The only real
> > problems I've had with sid were related to x-server; all other parts
> > of Debian are rock solid. Maybe the x-server Debian maintainers are
> > new/unexperienced in that task?
>
> The Debian X Strike Force are much older, c
On Thu, 04 May 2006 12:41:11 -0300
[EMAIL PROTECTED] wrote:
> I don't think we should blame all Debian developers. The only real
> problems I've had with sid were related to x-server; all other parts
> of Debian are rock solid. Maybe the x-server Debian maintainers are
> new/unexperienced in
On Thu, 4 May 2006 15:37:58 +0100
Mark Crean <[EMAIL PROTECTED]> wrote:
> Just my 2 cents but I am getting a little desperate at the number of
> bog ups in Unstable at the moment. I don't want to leave the platform
> but if things continue like this I will have to. Like many folks
> perhaps, I am
[EMAIL PROTECTED] wrote:
Just my 2 cents but I am getting a little desperate at the number of
bog ups
in Unstable at the moment. I don't want to leave the platform but if
things
continue like this I will have to. Like many folks perhaps, I am
completely
baffled by Debian's reluctance to get t
On 5/4/06, Florian Kulzer <[EMAIL PROTECTED]> wrote:
First of all, I have now looked into this a bit more; I also read the
bug reports which I mentioned in my earlier post in more detail. There
are two nicer ways to fix this problem:
a) /etc/X11/Xsession.xfree86 is in fact /etc/X11/Xsession fro
the
> bug reports which I mentioned in my earlier post in more detail. There
> are two nicer ways to fix this problem:
>
> a) /etc/X11/Xsession.xfree86 is in fact /etc/X11/Xsession from
>x11-common, it just gets renamed by mistake. Therefore you can just
>rename it again and
On Thu, May 04, 2006 at 11:39:29 -0700, L.V.Gandhi wrote:
> On 5/4/06, Florian Kulzer <[EMAIL PROTECTED]> wrote:
> >On Thu, May 04, 2006 at 08:52:55 -0400, Rick Friedman wrote:
> >> I'm running Debian Sid. This morning, I saw that quite a few X/Xorg
> >packages
> >> were available to be upgraded.
On 5/4/06, Florian Kulzer <[EMAIL PROTECTED]> wrote:
On Thu, May 04, 2006 at 08:52:55 -0400, Rick Friedman wrote:
> I'm running Debian Sid. This morning, I saw that quite a few X/Xorg packages
> were available to be upgraded. So, I went ahead and did the upgrades.
>
> I use kdm as my login displa
[EMAIL PROTECTED] wrote:
I don't think we should blame all Debian developers. The only real
problems I've had with sid were related to x-server; all other parts of
Debian are rock solid. Maybe the x-server Debian maintainers are
new/unexperienced in that task?
Managing something as
> I'm running Debian Sid. This morning, I saw that quite a few X/Xorg
> packages were available to be upgraded. So, I went ahead and did the
> upgrades.
>
> I use kdm as my login display manager. After the upgrade, X started fine.
> However, when any user would try to login, the screen would go bl
On Thu, May 04, 2006 at 03:37:58PM +0100, Mark Crean wrote:
> On Thursday 04 May 2006 13:52, Rick Friedman wrote:
> > I'm running Debian Sid. This morning, I saw that quite a few X/Xorg
> > packages were available to be upgraded. So, I went ahead and did the
> > upgrades.
> >
> > I use kdm as my lo
On Thu, May 04, 2006 at 11:01:14 -0400, Rick Friedman wrote:
> On Thu May 4 2006 10:01, Florian Kulzer wrote:
> > I had the same problem this morning. I could not spend too much time on
> > investigating it, but it seems to me that there is some sort of
> > dependency loop which screws up the insta
On Thu May 4 2006 10:01, Florian Kulzer wrote:
> I had the same problem this morning. I could not spend too much time on
> investigating it, but it seems to me that there is some sort of
> dependency loop which screws up the installation of the new version of
> x11-common. I extracted /etc/X11/Xses
On (04/05/06 15:37), Mark Crean wrote:
> On Thursday 04 May 2006 13:52, Rick Friedman wrote:
> > I'm running Debian Sid. This morning, I saw that quite a few X/Xorg
> > packages were available to be upgraded. So, I went ahead and did the
> > upgrades.
> >
> > I use kdm as my login display manager.
On Thursday 04 May 2006 13:52, Rick Friedman wrote:
> I'm running Debian Sid. This morning, I saw that quite a few X/Xorg
> packages were available to be upgraded. So, I went ahead and did the
> upgrades.
>
> I use kdm as my login display manager. After the upgrade, X started fine.
> However, when
On Thu, May 04, 2006 at 08:52:55 -0400, Rick Friedman wrote:
> I'm running Debian Sid. This morning, I saw that quite a few X/Xorg packages
> were available to be upgraded. So, I went ahead and did the upgrades.
>
> I use kdm as my login display manager. After the upgrade, X started fine.
> Howe
I'm running Debian Sid. This morning, I saw that quite a few X/Xorg packages
were available to be upgraded. So, I went ahead and did the upgrades.
I use kdm as my login display manager. After the upgrade, X started fine.
However, when any user would try to login, the screen would go black
momen
Fred J. wrote:
>Hello
>
>I have bee struggling with this problem for a while
>not, I would appreciate some help in fix it. I am not
>able to boot into wdm or X.
>
>I just did an #apt-get dist-upgrade from woody to the
>testing tree. Also I upgrade to kernel 2.6.12-1-686
>My system was working good
Hello
I have bee struggling with this problem for a while
not, I would appreciate some help in fix it. I am not
able to boot into wdm or X.
I just did an #apt-get dist-upgrade from woody to the
testing tree. Also I upgrade to kernel 2.6.12-1-686
My system was working good but now I have a problem
I had the some problem last night.
I fixed it this morning, some how it broke when i upgrade somehting,
but i dont know.
That's the recipe:
note: i'm not sure if all the steps are necesary, that's because it
worked for me this way.
1. rmmod nvidia
2. apt-get remove --purge nvidia-kernel*
3. cd /u
Hi,
I thought of restarting my machine after the browser was getting stuck
at some websites since last night. On restarting, X couldn't start. The
error log indicated that the Nvidia module couldnot be loaded. Below are
the last few lines from the XFree86 log:
(II) Setting vga for screen 0.
(**)
Paul Mackinney wrote:
Thanks a million. Since I was running without X, googling for the answer
as a previous correspondent suggested would have been difficult. Now I'm
off to read those 2.6.x docs...
If you're not aware, there are text-mode web browsers (lynx is the best
known one; links can b
Ritesh Raj Sarraf declaimed:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 2.6.x kernels do:
> # modprobe mousedev;
> # modprobe psmouse;
>
Thanks a million. Since I was running without X, googling for the answer
as a previous correspondent suggested would have been difficult. Now I'm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2.6.x kernels do:
# modprobe mousedev;
# modprobe psmouse;
HTH,
rrs
On Fri, 19 Mar 2004, Didier Caamano wrote:
> Date: Fri, 19 Mar 2004 03:00:29 -0700
> From: Didier Caamano <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subjec
On Fri, 19 Mar 2004 03:00:29 -0700
"Didier Caamano" <[EMAIL PROTECTED]> wrote:
>
> Is this just a bug that is being fixed or it is actually a problem in my
> computer; any hint in how I can work with this problem will be
> appreciated.
It's neither a bug nor a problem with your computer. It's a
c
Greetings:
I'm having a little bit of trouble starting X with kernel 2.6.4 from
unstable, I was using the standard kernel that comes with woody, then I
upgraded it using the normal method: apt-get install kernel-image.
With the old kernel X work flawlessly, but after the upgrade it start
havin
Thanks for your Inputs!
@Dave: I tried allready with several depth-parameters with no effect.
I think it's really the power-management wich makes these problems.
I tried another monitor yesterday and got the same troubles.
Now I play arount with PM-parameters in the ServerFlags of XF86Config-4 an
On Wed, Mar 17, 2004 at 04:36:57PM -0600, David wrote:
> On Wed, Mar 17, 2004 at 09:28:47PM +0100, [EMAIL PROTECTED] wrote:
> > I have serious problems to start the X with my sony multisync 17se.
> My monitor is a Sony Multiscan 15 sf2
> I had a lot of identical blackouts when I was upgrading XF
On Wed, Mar 17, 2004 at 09:28:47PM +0100, [EMAIL PROTECTED] wrote:
> I have serious problems to start the X with my sony multisync 17se.
> My configuration is as follows:
> Debian 24 from ftp.de.debian.org (woody)
> XFree86 V4.4.0 (after I crashed with 4.1.0)
Is this from some Debian package (i
On Wed, 2004-03-17 at 21:28, [EMAIL PROTECTED] wrote:
> hi!
>
> I have serious problems to start the X with my sony multisync 17se.
>
> My configuration is as follows:
>
> Debian 24 from ftp.de.debian.org (woody)
> XFree86 V4.4.0 (after I crashed with 4.1.0)
>
> Graphic-Device: 3dLabs Oxygen VX
hi!
I have serious problems to start the X with my sony multisync 17se.
My configuration is as follows:
Debian 24 from ftp.de.debian.org (woody)
XFree86 V4.4.0 (after I crashed with 4.1.0)
Graphic-Device: 3dLabs Oxygen VX1 (Glint Permedia V3) on PCI 1:0:0
Monitor: As described above.
It seems
On Fri, Feb 27, 2004 at 12:13:13PM +0100, David Baron wrote:
| Feb 27 11:57:27 d_baron ypbind[619]: broadcast: RPC: Timed out.
| ypbind[619] broadcast: RPC: Timed out. I have one of these every 74 seconds.
| This was flagged on google (this time I checked) but no solutions. What is
| it. This i
On Friday 27 February 2004 10:10, you wrote:
> --- David Baron <[EMAIL PROTECTED]> wrote:
> > 1. Netbeans Java-IDE, after recent upgrade including
> > XFree86, immediately
> > kicks out the session. One logs in again to a new X
> > session. This is not the
> > same as control/alt/bksp since in the
--- David Baron <[EMAIL PROTECTED]> wrote:
> 1. Netbeans Java-IDE, after recent upgrade including
> XFree86, immediately
> kicks out the session. One logs in again to a new X
> session. This is not the
> same as control/alt/bksp since in the 2.6.2 kernels,
> the mouse needs be
> exercised a bit
1. Netbeans Java-IDE, after recent upgrade including XFree86, immediately
kicks out the session. One logs in again to a new X session. This is not the
same as control/alt/bksp since in the 2.6.2 kernels, the mouse needs be
exercised a bit before it starts working. A new session.
(Note that Open
* R Ransbottom <[EMAIL PROTECTED]> [31-08-2003 02:30]:
> In installing xserver-common (4.2.1-10) on unstable I get a
> note:
> Note: not updating /etc/X11/Xwrapper.config; file does not exist.
A new version of that package is available. I am not sure if it
solves this issue though. The problem bit
R Ransbottom wrote:
In installing xserver-common (4.2.1-10) on unstable I get a
note:
Note: not updating /etc/X11/Xwrapper.config; file does not exist.
This is followed by xserver-xfree86 (4.2.1-10) noting:
Note: not updating /etc/X11/X; file does not exist.
Note: not updating /etc/X11/XF86Config-4
On Sat, Aug 30, 2003 at 08:44:34PM -0400, R Ransbottom wrote:
> What should I read/do to get X going?
You should read the BTS, like any other unstable user would. This is
endlessly reported there, including workarounds.
--
Marc Wilson | All of the true things I am about to tell you are
[E
In installing xserver-common (4.2.1-10) on unstable I get a
note:
Note: not updating /etc/X11/Xwrapper.config; file does not exist.
This is followed by xserver-xfree86 (4.2.1-10) noting:
Note: not updating /etc/X11/X; file does not exist.
Note: not updating /etc/X11/XF86Config-4; file does not exi
--- Joris Huizer <[EMAIL PROTECTED]> wrote:
> Hello everybody,
>
> Today I did an upgrade using
> apt-get upgrade
> with the bunk packages in the /etc/apt/sources.list
> -
> and it had a lot of upgrades for x in the bunk
> packages. I never had problems with the bunk
> packages
> before but... no
Hello everybody,
Today I did an upgrade using
apt-get upgrade
with the bunk packages in the /etc/apt/sources.list -
and it had a lot of upgrades for x in the bunk
packages. I never had problems with the bunk packages
before but... now suddenly the X isn't working anymore
!
I now removed the bunk p
-- Matthew Weier O'Phinney <[EMAIL PROTECTED]> wrote
(on Monday, 20 January 2003, 04:18 PM -0500):
> I just installed an ATI All-in-Wonder PCI VGA card in my machine, and
> I'm having a few problems with X.
>
> I'm using a Slimline flat-panel LCD monitor
> I'm getting some wierd behaviour, thoug
Hi Matthew.
I have ATI All-in-Wonder Pro AGP card and I use driver from GATOS for
XFree86 version 4.1.x. This driver works fine for me (XVideo, TV tuner ...)
<>
> Section "Module"
> Load"GLcore"
> Load"bitmap"
> Load"dbe"
> Load"ddc"
> Load"dri"
> Load"extmod"
> Load"freetype"
> Load"glx"
> Load"speedo"
> Load"type1"
> Load"vbe"
Load
I just installed an ATI All-in-Wonder PCI VGA card in my machine, and
I'm having a few problems with X.
I'm using a Slimline flat-panel LCD monitor, and I have a chart showing
Horizontal frequency and Vertical refresh rates. I've specified the
appropriate ranges in my /etc/X11/XF86Config-4 file. I
Hey, thanks Kent that's great.
(I have been following the list, honest! Guess I missed that post
though...)
:-)
Chris
Kent West wrote:
Chris Owen wrote:
I have now found a solution for this mouse problem in X: it seems gpm
was the problem. After uninstalling gpm, the PS/2 mouse now works
Chris Owen wrote:
I have now found a solution for this mouse problem in X: it seems gpm
was the problem. After uninstalling gpm, the PS/2 mouse now works
correctly in X. If anyone can tell me why this is, or whether there's
a workaround which lets me keep gpm, that would be interesting
(alt
I have now found a solution for this mouse problem in X: it seems gpm
was the problem. After uninstalling gpm, the PS/2 mouse now works
correctly in X. If anyone can tell me why this is, or whether there's a
workaround which lets me keep gpm, that would be interesting (although
to be honest I
Hi, if someone could help me get my X server + mouse running I'd be very
grateful.
Hardware details:
Old AJP 5400 laptop (you won't have heard of it), 75MHz Pentium, 16MB RAM
Trackpad PS/2 mouse
Cirrus Logic 754x display chipset
800x600 LCD display
Debian 3.0r0
The story so far:
I used to have R
Hello all,
i have two monitors (2x 1024x768) on my debian 3.0 with X 4.1.0.1 and WindowMaker
0.80.0. I configured the xinerama mode and most all works properly. When i set a
scaled backround picture its being resized to 2048x768 but the right monitor shows the
same "left part" of the picture t
Okay, I figured out the problem. Seems the xbase-clients package needs
to be installed. I don't quite understand why the packages of programs
like xosview don't depend on this.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> ssh -X [EMAIL PROTECTED]
-X is the same as saying "X11Forward = yes" and root@ is the same as
saying "-l root". Doesn't help. (I did try, just to make sure.)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello i have a computer with a Gforce2gts 32 ddram, 1.3mhz athlon-tbird
computer , 256 mb of memory.
I have Debian woody installed using xf4 and Sometimes X crashes dont know
why?. And i have checked /var/log/X* and .xsession-errors. The /var/
file when i do tail the only error i see is: "mous
Em Sáb, 2002-03-23 às 22:10, David Wright escreveu:
> Argh! I hate^H^H^H^H^H am having some trouble with X.
>
>$ ssh -l root foo.example.com
>foo# xosview &
> Can't open display named
>
this should be
ssh -X [EMAIL PROTECTED]
Michel.
> Yes, sshd_config on foo contains
>X11Forwardi
Argh! I hate^H^H^H^H^H am having some trouble with X.
$ ssh -l root foo.example.com
foo# xosview &
Can't open display named
Yes, sshd_config on foo contains
X11Forwarding yes
and ssh_config on my machine contains
ForwardX11 yes
In fact, everyting works fine on many other machines I have
* Stephen E. Hargrove ([EMAIL PROTECTED]) spake thusly:
> Cameron Kerr ([EMAIL PROTECTED]) spake thusly:
> > On Sat, 2 Feb 2002, shock wrote:
> >
> > Does it happen with any other user account?
>
> it happens with all accounts.
okay, i'm not really sure what's going on, but rebooting my client
Cameron Kerr ([EMAIL PROTECTED]) spake thusly:
> On Sat, 2 Feb 2002, shock wrote:
>
> Does it happen with any other user account?
it happens with all accounts.
> Try running the server in debug mode. This will likely tell you whats
> happening.
this results in output on both the client and ser
On Sat, 2 Feb 2002, shock wrote:
>I have two servers, and both have exactly the same configuration files.
>I can ssh2 to one and fire up X applications. However, the other
>results in the following. (Both servers have X forwarding enabled in
>the ssh2_config file.)
[snip debugging output]
Let'
I have two servers, and both have exactly the same configuration files.
I can ssh2 to one and fire up X applications. However, the other
results in the following. (Both servers have X forwarding enabled in
the ssh2_config file.)
[EMAIL PROTECTED]:~/bin/perlmonks$ ssh2 +x -v server2
debug: Connec
On Wed, Jan 30, 2002 at 02:25:31AM -0800, David Wright wrote:
> I am trying to set up a diskless workstation (to centralize maintainance) but
> am having problems getting X sessions to work.
I have done this as well.
> The system boots (from a floppy, then mounts root and /usr seperately over
>
I am trying to set up a diskless workstation (to centralize maintainance) but
am having problems getting X sessions to work.
The system boots (from a floppy, then mounts root and /usr seperately over
nfs), and I can login and work from a text console. The xdm login appears, but
when I log in,
On Friday 18 January 2002 14:25, Benjamin Sommerfeld proclaimed:
>
> default window-manager: look at the links
> /etc/alternatives/x-window-manager and /etc/alternatives/x-session-manager
> they point to your default window managers. i think if you set the
> x-session-manager to gnome for instance,
Hi,
On Fri, Jan 18, 2002 at 12:25:00PM +0100, Benjamin Sommerfeld wrote:
> the installation of these drivers is really no problem. just read the
> Readme form their homepage.
> default window-manager: look at the links
> /etc/alternatives/x-window-manager and /etc/alternatives/x-session-manager
On Fri, 18 Jan 2002, Xavier Hubin wrote:
> I experienced also flickering but i fixed it by updating manually in the
> XF86config-4 file the refrech rate given in my monitor documentation.
> Be carfull with that! Be sure to put value given in your monito doc!!
If they're not printed on the monitor
On Fri, 18 Jan 2002, David Wright wrote:
> I don't need top 3D performance, so I would prefer not have have to
> deal with nVidia's closed-source drivers -- isn't there also an
> open-source driver from XFee86-4? ("nv"?) And shouldn't the kernel
> load agpart to use the AGP slot? How do I get it t
On Friday 18 January 2002 11:45, David Wright wrote:
> I am using an AGP nVidia GeForce2 MX video card and am experiencing video
> problems. The screen, even in text mode, shows lots of flickering,
> horizontal lines.
>
> The monitor is a 1600 x 1200 19" LCD; I can plug it into another machine
> an
On Fri, 18 Jan 2002, David Wright wrote:
>
> I am using an AGP nVidia GeForce2 MX video card and am experiencing video
> problems. The screen, even in text mode, shows lots of flickering, horizontal
> lines.
>
> The monitor is a 1600 x 1200 19" LCD; I can plug it into another machine and
> th
I am using an AGP nVidia GeForce2 MX video card and am experiencing video
problems. The screen, even in text mode, shows lots of flickering, horizontal
lines.
The monitor is a 1600 x 1200 19" LCD; I can plug it into another machine and
the image is beautiful, so I don't think the problem is in
On 12-10-2001, at 08h 27'18", Kurt Lieber wrote:
> I had a similar problem -- check to make sure you aren't also running gpm
> (General Purpose Mouse interfaces) It doesn't always play nicely with X.
>
I know, it was the first think I checked. After that I looked at
IRQ. Everything seams fine.
I had a similar problem -- check to make sure you aren't also running gpm
(General Purpose Mouse interfaces) It doesn't always play nicely with X.
You can check if gpm is started by doing 'ps ax |grep gpm'
hth
--kurt
> My problem is that I can't use the mouse and sometime the
> keyboard. Th
I have a problem with the X server.
I have a new PC, with P IV on a Intel 850 chip set
with a PS2 mouse and keyboard.
I run Xfree 4.1.0.1-3 and kernel 2.4.10ac12.
My problem is that I can't use the mouse and sometime the
keyboard. The error is not reproducible. By simply restarting
X I can have
> "Aaron" == Aaron Traas <[EMAIL PROTECTED]> writes:
Aaron> When I start emacs, using my trusty old .emacs file I've
Aaron> been keeping and maintaining for years, The colors I've
Aaron> selected aren't quite working right. Basically, I set the
Aaron> background color to black,
Yes, I am running KDE 2.1.1, and that was the problem! Everything works
now. I did have to restart X to get this to work, however...
Thanks for your help!!
--Aaron
Daniel Katz wrote:
>
> > "Aaron" == Aaron Traas <[EMAIL PROTECTED]> writes:
>
> Aaron> I'm using Woody/testing, and XFree86 4.
> "Aaron" == Aaron Traas <[EMAIL PROTECTED]> writes:
Aaron> I'm using Woody/testing, and XFree86 4.x. I'm using emacsen
Aaron> flavor of Emacs20.
Aaron> Basically, I set the background color to black, and that works,
Aaron> except or where there's text. Each character taken up by
Aaron> somet
I'm using Woody/testing, and XFree86 4.x. I'm using emacsen flavor of
Emacs20.
When I start emacs, using my trusty old .emacs file I've been keeping
and maintaining for years, The colors I've selected aren't quite working
right. Basically, I set the background color to black, and that works,
exce
I can't figure out just what package is causing this problem.
I noticed it first when i got branden's 4.1.0-pre5 X packages and
installed them. every once and a while the screen would just freeze. if
I Ctrl-Alt-F1 to a console and then return to the F7 (X) terminal it is
back to normal. After a f
On Mon, May 28, 2001 at 11:24:36AM +0100, [EMAIL PROTECTED] wrote:
> Hello
>
> I am trying to to install Debian GNU/Linux 2.2 rev 2 non US on to Compaq
> Professional Workstation 5000 (system outline below).
>
> So far I have managed to successfully install the basic Debian system. But I
> nee
Hello
I am trying to to install Debian GNU/Linux 2.2 rev 2 non US on to Compaq
Professional Workstation 5000 (system outline below).
So far I have managed to successfully install the basic Debian system. But I
need to recompile the kernel to take advantage the systemy?s dual processors on
try
On Fri, 18 May 2001, harsha wrote:
>
> hi,
>i was using a potato system. i did a dist-upgrade to woody. the upgrade
> went without a hitch but for X. some packages were of version 3.3.6-18. i
> tried removing 3.3.6-18 but said dependency problems.
>
> I have Riva TNT2 ULTRA card. download
Hello
You can try this ...
1. Add " deb http.us.debian.org/debian sid main " to your
/etc/sources.list 2. apt-get update
3. apt-get install xserver-xfree86
4. Download nvidia's driver sources ( NVIDIA_GLX-0.9-769.tar.gz
and NVIDIA_kernel-0.9-769.tar.gz
hi,
i was using a potato system. i did a dist-upgrade to woody. the upgrade went
without a hitch but for X. some packages were of version 3.3.6-18. i tried
removing 3.3.6-18 but said dependency problems.
I have Riva TNT2 ULTRA card. downloaded the binary drivers from nvidia and
installed th
1 - 100 of 200 matches
Mail list logo