On Aug 17, 2006, at 1:59 AM, cliveb wrote:
1. It's not clear from the info published so far whether it will be
possible to switch between the digital inputs from the remote. The
photo of the remote is just a little too small to be able to read all
the buttons' labels.
Yes, by navigating to a men
Ah, doing a little trial and error, are we?
Glad you found the problem yourself, and now everyone can learn from
your mistake.
Well done! :D
--
nelamvr6
nelamvr6's Profile: http://forums.slimdevices.com/member.php?userid
This is the result of unchecking "mp3" in Server Settings > File Types.
Folks - don't do this!
--
moshulu
moshulu's Profile: http://forums.slimdevices.com/member.php?userid=6811
View this thread: http://forums.slimdevices
I have 5 Homeplug devices tied to SlimP3's throughout the house and I
have convinced my friends with SLIMP's to buy several also (Devolo
among other names). They just work right out of the box. No more "bad
wireless days". No worries about wireless security. My music no longer
cares when the wife
RadioIO provides the OPML directory, so it should just show up
automatically. :)
--
andyg
andyg's Profile: http://forums.slimdevices.com/member.php?userid=3292
View this thread: http://forums.slimdevices.com/showthread.php
My favorite RadioIo host has a new channel, RadioIO Unlimited. Is there
a way I can get that stream thrpough my Squeezebox?
Thanks!
--
JoeHartley
JoeHartley's Profile: http://forums.slimdevices.com/member.php?userid=7058
I plan to drop the wireless connection all together since is only
around 10 feet wire run. My question is there anything I have to set to
use the ethernet?
Nothing too complicated. Since you have wireless I'm assuming you're
running a wireless router. All you'll need to do is run an ethernet
SlimServer 6.3.1 on a G3 iMac.
I want the Mac to be able to get internet over wireless while at the
same time serving music to the Squeezebox over Ethernet. How?
The problem is that the Squeezebox seems to have some problems using
its wireless network connection, perhaps not playing nice with th
No, just plug in the Ethernet cable.
Either power-cycle the SB to get to the network setup menu or press
left on the remote for 5 seconds. Select "Set up networking" then
"Connect to an ethernet network". Then just specify IP address
settings like before and go.
--
Mark Lanctot
-
Last two weeks, I constantly get music dropout I assumed is wireless
related. The server and everything has not changed since then around 3
months.
I plan to drop the wireless connection all together since is only
around 10 feet wire run. My question is there anything I have to set to
use the et
ModelCitizen wrote:
> Rebooted Squeezebox. Asks me to update firmware (why didn't it do this
> first time around?... yes I know, it's beta). Did that and get some
> message like "bad state" or something.
There was a bug (in slimserver, I believe) that caused the wireless
connection to time out bef
ModelCitizen wrote:
> Cheers but I tried Linux.
I hope it was more thorough than when you brought that Pentium 166 with
96MB of RAM round to my place and wanted to install Linux on it :)
R.
___
discuss mailing list
discuss@lists.slimdevices.com
http://
Hi,
Thanks all for the very helpful posts. After considering for a few
minutes I realized that in my particular setup I can move the
cablemodem & router downstairs behind the stereo stuff and wire
everything (network drive, squeezebox, laptop) to the router back there
with short cat5 patch cables
even though all the tags in my compilations say "various artists" and
all are checked as compilations, when browing by artist with slimserver
6.3.0 - 7701 some get listed under artist "various" while others are
listed under artist "various artists". how do i get them all under
"various artists"?
When you have a blank screen does the server think ther is a player
connected?
Which 6.5 nightly are you using?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forum
The owls have gone to bed.
Squeezebox is now pretty much dead.
I did, after rebooting three times get a request to update the firmware
again. I did this. And now, after going through the network connection
stuff again I get "Connecting To SlimServer" and then a black screen.
Can only reboot.
I'm g
Rebooted Squeezebox. Asks me to update firmware (why didn't it do this
first time around?... yes I know, it's beta). Did that and get some
message like "bad state" or something.
I can hear the owls outside now. It's probably a better bet to listen
to them for an hour or two. :-)
MC
--
ModelC
It should work just the same on window as liunx minus the one feature I
mentioned. Post here and we can help you get it up and running.
- do you have a firewall on the new machine?
- can you get softsqueeze to work with the new server
--
Triode
-
Groaaann.
I tried to get my Squeezebox to connect to my alternative 6.5 version
of SlimServer and the box froze at "Press Right now to use SlimServer".
I've had to power off to recover.
I am now trying to balance out the time I take to put CDs in the CDX
(and lack of playlists, internet r
Cheers but I tried Linux. "Panic, Panic cannot mount root". I tried your
(?) Slimserver CD. I couldn't get this to work either. I tried another
four versions of Linux... within the time I had to get it right I had
no joy.
I am sticking with Windows. I do not want to spend time learning new
Os's. I
I have 6.3.1 with the latest NV beta 'b7' and I have the same problem.
It's a little silly, as after installing the font add-on from the
Infrant forum it now displays crylic characters fine on the SB3 display
and in the browser, but not simple acute accents such as é.
--
rickwookie
One thing to point out. 6.5 includes additional features to reduce
dropouts on linux if they occur when you are viewing web pages. Pat is
running this and it may be an option for your laptop (if you are linux
litterate - its probably too big a step otherwise)
--
Triode
---
rickwookie Wrote:
> Also I can't fast forward of rewind the tracks.
No idea about the clicks, but this part is expected - you can't fast
forward or rewind when you're using a file format that is being
transcoded.
The Squeezebox doesn't have a native AAC decoder, it is transcoded to
AIFF, FLAC o
ModelCitizen wrote:
Cheers Triode. I was nearly at this point anyway.
I've spent so many hours getting 6.3.* to work correctly that I'll be
glad to see the back of it.
I've been running the beta 6.5 for a while, and Triode and others have
made great strides at fixing the dropouts in my system.
Cheers Triode. I was nearly at this point anyway. I've installed it on
my main machine and will try it. I hope it will run on my underpowered
dedicated laptop but do not hold out much hope. Maybe it's time to
trash it.
I've spent so many hours getting 6.3.* to work correctly that I'll be
glad to s
6.5 has actually had a lot more tuning to improve performance, but it
possibly requires a bit more memory. I would recommend trying 6.5
rather than hunting for the cause of delays with 6.31.
It is nearing the end of development and so either wait a few more
weeks or try one of the nightly builds
You could always install slimserver now and try it out on your computer
with softsqueeze before you buy. That would give you confirmation of
the answers provided by above.
--
NWP
NWP's Profile: http://forums.slimdevices.c
See also this thread on the Digitally Imported forums.
http://forums.di.fm/showthread.php?t=105112
--
Paul Webster
Paul Webster
http://www.lastfm.com/user/BondJamesBond
Paul Webster's Profile: http://forums.slimdevices.co
Hello all.
Since installing 6.3.* I have spent quite a bit of time trying to get
my system stable again. I thought I'd got it sussed and then, for no
apparent reason I started to suffer from drop outs, something I'd not
experienced for a long time.
I'm running XP Home on a 500mhz PII Dell Latitud
Well as the first time I have evr used a frum - I'M VERY IMPRESSED.
Many thanks to both Pat and MC.
I note the SS software is available in many platforms and as such
either a) I'll try the other OS codes or b) I'll buy a new more
compatible NAS device.
Many thanks again - I'm ordering the blac
I've been using my two SB3s happily now for about a month playing my
existing mp3 collection and newly ripped to FLAC versions of my CD
collection from a ReadyNAS NV.
Today though I added a CD (folder) from my itunes folder that had been
ripped and encoded using itunes with the default settings,
ashmant Wrote:
>
> 1 - Do I need to use the slim server software as I already have a
> networked storage system in use (i.e can the SB3 search this
> permanantly connected network storage - SNAP with GuardianOS)?
You will need Slimserver, as Pat says. Nothing else will do. You will
be able to ac
i'm running ss 6.3 on osx 10.4.7 and I have no rr or ff (within a song)
capability at all. the bug link looks like it's a problem in windows as
well.
--
exile
exile's Profile: http://forums.slimdevices.com/member.php?useri
On 19-Aug-06, at 1:12 AM, gdg wrote:
kdf Wrote:
On 18-Aug-06, at 11:10 PM, gdg wrote:
[color=blue]
There are times when moving right that
you will have a lag due to server activity. This part is a work in
progress.
-kdf
Hmmm, it would be a real shame if, as the SB becomes more popular,
ashmant wrote:
1 - Do I need to use the slim server software as I already have a
networked storage system in use (i.e can the SB3 search this
permanantly connected network storage - SNAP with GuardianOS)?
I don't know the details of your setup, but the SqueezeBox is a slim
device. Literally, i
radish Wrote:
> The only issue right now is Logitech's SetPoint software which screws
> everything up. If I quit SetPoint it works fine, if it's running it
> doesn't work. I'm still working on sorting that out.
Have you looked into modifying the player.ini file that comes with
SetPoint so your ap
I have two technical queries if anyone can help:
1 - Do I need to use the slim server software as I already have a
networked storage system in use (i.e can the SB3 search this
permanantly connected network storage - SNAP with GuardianOS)?
2 I pay a subscription to Digitally Imported music for
gdg Wrote:
> My files are all WAV but they've always been WAV and I know I was able
> to get the feature to work in the past.
Hi Gerry,
In some threads in some other forums, notably this thread
http://db.audioasylum.com/cgi/m.mpl?forum=pcaudio&n=14276&highlight=AKG+gdg&r=&session=
and this one
I've built a Tripath based amp for my SB2, and have a spare stepped
attenuator for sale, if anyone is interested.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300019288216
--
plim
plim's Profile: http://forums.sli
As Radish said...
radish Wrote:
> As kdf said...
> > kdf Wrote:
> > What version of the server are you using?> >
Seriously: answering a few questions and doing some tests as adviced
would get us further than statements about why things are so bad
nowadays.
--
mherger
Michael
The Devolo High Speed 85Mbit work superbly. I have four of them and I
can stream video from the security cameras, listen to SB and transfer
data between two TiVo's at the same time. Each device runs at between
50 and 70 Mbit (about 3 times the real speed of 54g) and they are so
simple to setup. Do
Simply change the URL to mms://138.25.162.211:8080/ This instructs
SlimServer to send Windows Media Player headers, which the server
requires.
--
andyg
andyg's Profile: http://forums.slimdevices.com/member.php?userid=3292
That is only an option with 'Now Playing' :(
--
earthbased
I'm not quite sure what you mean by that. If I use Browse artists to
find an artist then an album and play it, after 30 secs the
screensaver (I use MusicInfo) cuts in, then if I use the left key I'm
taken back to the album I originally
VIVA PHONE STORE INTERNATIONAL
21/NEW ROAD
PHONE PLAZ
LAG
NG
WE SELL ALL KIND OF MOBILE PHONES,LAPTOP,IPODS AND GAMES IN AN
ACCOMODATIVE PRICE.
play station 1... $60usd
play station 2 $150
xbox 360...$200
Nintendo ds.70usd
Sony psp150usd
GARMIN 396..160USD
th
Seems like a challenge to me! I have also tried the stream in
foobar2000, but it doesn't work (I've always managed to stream with
foobar2000 before). Maybe there's some media player detection trickery
going on. Any ideas?
--
smc2911
--
kdf Wrote:
> On 18-Aug-06, at 11:10 PM, gdg wrote:
>
> >
> > Did you see the additional problem I'm having with the remote. Could
> > that be a busy server issue?
> >
> maybe. or low batteries, bad angle, fluff in the ir sender on the
> remote.
> -kdf
Non of the above. Happened with my SB rem
46 matches
Mail list logo
