Le 9 avr. 2013 à 22:56, Timo Sirainen t...@iki.fi a écrit :
On 8.4.2013, at 23.26, to...@starbridge.org wrote:
imap(clean-quarant...@spamguard.fr): Panic: file istream.c: line 153
(i_stream_read): assertion failed: (_stream-skip != _stream-pos)
On Wed, 10 Apr 2013 23:46:36 +0300
Timo Sirainen t...@iki.fi wrote:
OK, still not quite v2.2.0, but now it's definitely very close. :)
Looking forward to the release, thank you!
* Running dsync no longer triggers quota warnings.
Not sure if you saw my last post about this change.. it
On Thu, 11 Apr 2013 08:06:58 +0200
Oli Schacher dove...@lists.wgwh.ch wrote:
Error in sys.excepthook:
... and after the first coffee I realize the error is generated by our
python quota script and not by dovecot. I wonder why this only showed up
since this change... sorry for the noise.
--
Hi there,
I ran into an issue yesterday (dovecot 2.0) whereby when we dsync messages from
a local machine (sdbox) to a remote (Maildir) which have different
pop3_uidl_formats configured, the uidl format is not preserved. There doesn't
seem to be any way to force this in the code, although I
Hi
Here are a few unintegrated patches, just tested against 2.2rc7:
1) NetBSD's getmntinfo uses struct statvfs while other BSD use struct statfs
http://ftp.espci.fr/shadow/manu/patch-ak
2) NetBSD 5.x net_getunixcred() support. Build on NetBSD, but not tested
(I am testing on NetBSD 6.0):
Well, receiving ALL mails again, might not be too handy, but 14 days
is a quite short time. So can i change the pop3 settings so old
emails are stored for e.g. 3 months instead of 14 days? And just
curious, where can i disable the configuration that pop3 deletes
received messages?
Hi,
thanks for the answer.
Do I understand you right that currently it's not possible to manage
both system users and virtual users in a dovecot 2 and lmtp setup?
You were talking about adding a generic passdb/userdb {
auth_username_format } setting. Are there any plans to do so?
What are your
On 11.4.2013, at 9.06, Oli Schacher dove...@lists.wgwh.ch wrote:
* Running dsync no longer triggers quota warnings.
Not sure if you saw my last post about this change.. it works but
now maillog always shows these empty error messages after executing the
quota script:
Apr 11 07:55:08
On 11.4.2013, at 11.41, Emmanuel Dreyfus m...@netbsd.org wrote:
Here are a few unintegrated patches, just tested against 2.2rc7:
1) NetBSD's getmntinfo uses struct statvfs while other BSD use struct statfs
http://ftp.espci.fr/shadow/manu/patch-ak
2) NetBSD 5.x net_getunixcred() support.
On Wed, Apr 10, 2013 at 09:21:40PM +0300, Timo Sirainen wrote:
Not if you kick the users out at the correct time:
- dsync
- switch user to new format
- kick users
- final dsync
It doesn't matter if new connections arrive during the final dsync,
because they are using the new format
On 11.4.2013, at 13.07, Thomas Hummel hum...@pasteur.fr wrote:
It doesn't matter if new connections arrive during the final dsync,
because they are using the new format already. dsync merges changes, it
doesn't destroy any changes.
It doesn't destroy changes but the user may see an
On Thu, Apr 11, 2013 at 01:09:18PM +0300, Timo Sirainen wrote:
Which is probably a few seconds, so I don't see this as much of a problem.
Ok, thanks.
--
Thomas Hummel | Institut Pasteur
hum...@pasteur.fr | Groupe Exploitation et Infrastructure
On Thu, 2013-04-11 at 11:04 +0200, David Obando wrote:
Hi,
thanks for the answer.
Do I understand you right that currently it's not possible to manage
both system users and virtual users in a dovecot 2 and lmtp setup?
If you have only a single domain, set auth_username_format=%Ln and
Timo Sirainen t...@iki.fi wrote:
By this I think you don't mean special authentication mechanisms, or even
AUTHENTICATE PLAIN mechanism, but you mean that someone is using LOGIN
command in such a kludgy way that the password field is over 1024
bytes long?
This is for pam_saml. The webmail
On 11.4.2013, at 14.58, m...@netbsd.org (Emmanuel Dreyfus) wrote:
By this I think you don't mean special authentication mechanisms, or even
AUTHENTICATE PLAIN mechanism, but you mean that someone is using LOGIN
command in such a kludgy way that the password field is over 1024
bytes long?
On 04/04/2013 03:56, Christian Balzer wrote:
2. Despite the fact that it will be trivial for anybody to determine that
OEM A is now hosted with us, a SAN SSL makes all the SANs visible in one
go, something they probably don't want.
But someone smart enough to be able to look at a certificate,
Hello all,
I try to configure dovecot to make all imap accesses read-only for a certain
user. I thought this would be possible by creating a global acl file (here
global-acl) like:
user=username lr
and
plugin {
acl = vfile:/etc/dovecot/global-acls:cache_secs=300
}
But that seems to be
On 2013-04-11 5:00 AM, HylkeB hy...@movinsoftware.nl wrote:
I see now, took some time for me to sink in. Is there any way on the server
to disable the pop3 protocol, so all email users cant accidently use pop3
and delete all their old emails?
I suppose i would have to do something like the
Where can I find unaltered distribution config files (/etc/dovecot/ and
/etc/dovecot/config.d/) for Dovecot 2.1.7? I upgraded from version 1
and had to butcher them to get it working. Now that I understand it
better, I'd like to do it right.
--
Dave
Hi Timo,
I'm curious and have questions about the new Object Storage Plugin
(OSP), and how it can be leveraged by an SMB like us.
First, am I reading this right where it could be used as a kind of
'live/realtime backup' solution, where everything is stored *both*
locally and in the cloud,
On Thu, Apr 11, 2013 at 02:54:01PM +0300, Timo Sirainen wrote:
This is for pam_saml. The webmail sends a signed SAML assertion as the
password, and the PAM module validates it.
The pam_saml could easily be changed to use AUTHENTICATE PLAIN instead.
pam_saml is not the component that choose
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
I try to configure dovecot to make all imap accesses read-only for a certain
user. I thought this would be possible by creating a global acl file (here
global-acl) like:
Sorry, there is still no default ACLs feature in
On 11.4.2013, at 15.19, Dave Gattis dave.gat...@suhner.com wrote:
Where can I find unaltered distribution config files (/etc/dovecot/ and
/etc/dovecot/config.d/) for Dovecot 2.1.7? I upgraded from version 1 and had
to butcher them to get it working. Now that I understand it better, I'd
Let me explain some more details, that seem important to understand:
I cannot use acl files per folder/mailbox because the MTA creates folders
dynamically (re-orders mails in folders). So I really would need some idea to
tell dovecot to let a certain user access his mailbox/folders read-only, no
On Thu, 11 Apr 2013 16:00:22 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
I try to configure dovecot to make all imap accesses read-only for a certain
user. I thought this would be possible by creating a global acl file
Am 11.04.2013 15:05, schrieb Stephan von Krawczynski:
Let me explain some more details, that seem important to understand:
I cannot use acl files per folder/mailbox because the MTA creates folders
dynamically (re-orders mails in folders)
why does the MTA that?
normally the MTA should only
On Thu, 11 Apr 2013 15:08:31 +0200
Reindl Harald h.rei...@thelounge.net wrote:
Am 11.04.2013 15:05, schrieb Stephan von Krawczynski:
Let me explain some more details, that seem important to understand:
I cannot use acl files per folder/mailbox because the MTA creates folders
On 11.4.2013, at 16.07, Stephan von Krawczynski sk...@ithnet.com wrote:
On Thu, 11 Apr 2013 16:00:22 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
I try to configure dovecot to make all imap accesses read-only for a certain
On Thu, 11 Apr 2013 16:00:22 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
I try to configure dovecot to make all imap accesses read-only for a certain
user. I thought this would be possible by creating a global acl file
On Thu, 11 Apr 2013 16:15:23 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 16.07, Stephan von Krawczynski sk...@ithnet.com wrote:
On Thu, 11 Apr 2013 16:00:22 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
On 11.4.2013, at 16.24, Stephan von Krawczynski sk...@ithnet.com wrote:
The MTA can work as it used to, if it can just set a group-read permission
to the files. So your read-only user would belong to that read-only-group.
I'm not sure how Postfix assigns permissions, but if it can't do that
On Thu, 11 Apr 2013 12:22:50 +0300
Timo Sirainen t...@iki.fi wrote:
Those errors come from your script. I don't see anything in the quota
warning change that could have changed a behavior in your script.
Maybe your script changed also around the same time?
yeah, sorry. there was indeed a
On 2013-04-11 8:31 AM, Charles Marcus cmar...@media-brokers.com wrote:
Third - I'm a little confused by the Amazon S3 pricing page,
Specifically, the 'Request Pricing' shown here:
http://aws.amazon.com/s3/pricing/
Also...
Would the plugin support the ability to use two different storage
On Thu, 11 Apr 2013 16:35:32 +0300
Timo Sirainen t...@iki.fi wrote:
On 11.4.2013, at 16.24, Stephan von Krawczynski sk...@ithnet.com wrote:
The MTA can work as it used to, if it can just set a group-read permission
to the files. So your read-only user would belong to that read-only-group.
On 2013-04-11 9:55 AM, Charles Marcus cmar...@media-brokers.com wrote:
Would the plugin support the ability to use two different storage
'namespaces', e.g., one for primary email storage (stored on S3's
'Standard' storage tier), and one for 'older or 'archived' emails
stored on the much
Am 11.04.2013 15:00, schrieb Timo Sirainen:
On 11.4.2013, at 15.07, Stephan von Krawczynski sk...@ithnet.com wrote:
I try to configure dovecot to make all imap accesses read-only for a certain
user. I thought this would be possible by creating a global acl file (here
global-acl) like:
Sorry for top posting, but I have no additional info on this.
BTW I need to refresh the question as I have tried squat, and I'm biting the
dust with the already known problems
( Corrupted squat uidlist file or Panic: file squat-trie.c: ).
Is there some pointer on where/how to find assist on
On Thu, Apr 11, 2013 at 12:57:45PM +, Emmanuel Dreyfus wrote:
Perhaps [MASTER_AUTH_MAX_DATA_SIZE] could be configurable?
I tried to add a configuration option for that, but dovecot design
makes a good job at separating master and login structures, hence
The Right Way is not obvious. Anu
On Thu, 2013-04-11 at 15:41 +, Emmanuel Dreyfus wrote:
On Thu, Apr 11, 2013 at 12:57:45PM +, Emmanuel Dreyfus wrote:
Perhaps [MASTER_AUTH_MAX_DATA_SIZE] could be configurable?
I tried to add a configuration option for that, but dovecot design
makes a good job at separating master
On 5.4.2013, at 18.19, Max Pyziur p...@brama.com wrote:
So my question relates to the second part of the configuration examples
in the links above:
service tcpwrap {
unix_listener login/tcpwrap {
group = $default_login_user
mode = 0600
user = $default_login_user
}
}
Where
On 11.4.2013, at 18.29, Pigi p...@frumar.it wrote:
Sorry for top posting, but I have no additional info on this.
BTW I need to refresh the question as I have tried squat, and I'm biting the
dust with the already known problems
( Corrupted squat uidlist file or Panic: file squat-trie.c: ).
On 11.4.2013, at 15.31, Charles Marcus cmar...@media-brokers.com wrote:
I'm curious and have questions about the new Object Storage Plugin (OSP), and
how it can be leveraged by an SMB like us.
I'll give some more complete answers and examples and such within a few days..
Or probably better
On Thu, 11 Apr 2013, lists-dovecot wrote:
[... snip ...]
I've put in a test ip address in /etc/hosts.deny like so:
dovecot: 166.84.1.2
And then I execute the following from 166.84.1.2 to port 110:
bash-3.2$ telnet SiteWhereImConfiguringDovecot 110
Trying SiteWhereImConfiguringDovecot...
How to lock dovecot-uidlist file before reading by an external program?
[perl script]
On 04/11/2013 10:39 PM, Andrzej A. Filip wrote:
How to lock dovecot-uidlist file before reading by an external program?
[perl script]
I have been too sending happy.
http://wiki2.dovecot.org/MailboxFormat/Maildir
The dovecot-uidlist file doesn't need to be locked for reading.
Hi!
I wrote a little something about how to prevent delivery to mailboxes
over quota while still being in the SMTP dialogue:
http://sys4.de/en/blog/2013/04/08/postfix-dovecot-mailbox-quota/
(Postfix/Dovecot-2.2)
--
[*] sys4 AG
http://sys4.de, +49 (89) 30 90 46 64
Franziskanerstraße 15, 81669
Max Pyziur p...@brama.com wrote:
I've put in a test ip address in /etc/hosts.deny like so:
dovecot: 166.84.1.2
Maybe
imap: 166.84.1.2
imaps: 166.84.1.2
pop3: 166.84.1.2
pop3s: 166.84.1.2
Joseph Tam jtam.h...@gmail.com
47 matches
Mail list logo
