Tom,
After you see the message that 'The QSO does not match the
current filter' , click the OK button followed by an Escape. This
cancels the current filter and lets you select any QSO shown.
If a 'Selection' is active, this does not work, because only QSOs
that are in the current selection
Jim,
The next release has an extra priority added, so I can deal with the
band / mode combinations too. The rest is as you suggested,
with priority given to the 'mode'. This stuff gets complicated!
Paul
At 01:43 PM 9/3/03 -0700, Jim Reisert AD1C wrote:
Thanks for the feedback. My prior
Hello!
I am using a 756P2 and no problems with DX4win, only when announcing a DX
spot it does not show at the window the QSX frequency.
My settings at DX4win are normal : address 00 and 19200.
At the transceiver:
CI-V Transceive= ON (If I set this OFF it does not work at all with DX4win)
CI-V
Sorry Jaime, ICOM radios can not put the split in the QSX window when
announcing a DX spot. This is a limitation of the ICOM radio protocol.
73 - Jim aD1C
--- Jaime P.Ullívarri [EMAIL PROTECTED] wrote:
I am using a 756P2 and no problems with DX4win, only when announcing a DX
spot it does not
Hello All
I just get a second laptop in the house.
Is it posible to use DX4WIN in a Network configuration ???.
Have a plan to use one laptop in the radio rom, and the other one
instaled in the bedrom using wirles network.
73 de Rune LA7THA
Inquiring minds want to know... What exactly are you logging in the
bedroom??
- Original Message -
From: Rune Øye [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Thursday, September 04, 2003 10:37 AM
Subject: [Dx4win] DX4win and Network
Hello All
I just get a second laptop in
Hi Rune,
Yes presently I load DX4win in my main computer in the shack but now in the
summer I operate out at the garden, with a laptop and wireless network, my
Logfile is at the main computer, no problems at all. Many DX4win users load
DX4win in two or several computers. Maybe you want a DX Alert.
Hi Jim,
To see if telnet is working from your PC got to a command prompt. At the
command prompt type telnet na2na.net (with out the quotes). This will let
you know if telnet is working. This is my node here at the house.
If that is working, create an entry in DX4Win for my node and then try to
8 matches
Mail list logo