Hi a bit of advice please.
I am in the process of retiring an old PC used when travelling and operating
from XE.
I have DX4win uploaded and running as well as CCUser cluster software connected
to VE7CC-1. I have transferred all (I think) of the setting from one laptop to
the other but when
I could not agree more. A well deserved honour.
Thank you for all you do and have done for all DXers Jim
Andy
G3SVD
From: Bill Barr, N4NX n...@comcast.net
To: DX4WIN@mailman.qth.net
Sent: Friday, 6 April 2012, 18:46
Subject: [Dx4win] Jim AD1C selected to CQ
Hear Hear,
Jim, You do a great job and you work is really appreciated. You fully
deserve this award. Well done.
Andy G3SVD
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John, K9EL
Sent: 06 March 2012 03:50
To: 'PY2YP';
Hi,
I know that I have done this before but I have forgotten how.
Can someone please indicate how I can export my entire log as an ADIF file.
I have tried but it always ends up as a .csv file. Except when I do a
partial export for LoTW for example.
73 and thanks
Andy G3SVD
To: REFLECTOR dx4win
Subject: Re: [Dx4win] Export log
Fileimport/export and then choose the first choise: adif
73 Kostas sv1dpi
- Original Message -
From: Andy Hewitt andyphew...@btopenworld.com
To: Dx4win@Mailman. Qth. Net dx4win@mailman.qth.net
Sent: Sunday, February 19, 2012 1:26 PM
Subject
GM all,
I have been using various versions of DX4Win with the TS950sdx for some
years now but a couple of days ago something went wrong and I have been
unable to find the fault, if such it is. Now if I click on a spot in the
band map I get a beep from the rig, the mode changes, and the red arrow
Mark,
What you have set up works fine for me and has done so for some years. I am
using CC User to connect sometimes to VE7CC-1 but mostly to a cluster in the
UK. I have moved LOCALCC User,localhost:7300 to the top of the cluster list
and I have to click on SH/DX in the packet window. It works
I have just upgraded my laptop from ver 7.06 to 8.04 and now the laptop wont
talk to the IC706mk2g that I use in Mexico. I copied over the ini file and
everything else works fine. It was only after the transfer that I saw that ICOM
data rate is not copied over. Now I cannot open the 7.06 file
thanks for your help, I've copied this to the support reflector just in
case any one else has the difficulty.
73
Andy XE1/G3SVD
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Andy Hewitt andyphew...@btopenworld.com
Cc: dx4win@mailman.qth.net
Sent: Wednesday
that there was a problem
I also saw in a posting that it was functioning without problems.
Javi LU5FF
-Original Message-
From: LU5FF - Javier [mailto:lu...@yahoo.com.ar]
Sent: 28 February 2010 16:32
To: Andy Hewitt
Subject: DX4WIN y el Keyboard
Andy como va todo.. espero que bien..
te hago
I have just made something weird happen to my DX4win log. I was importing my
log for yesterday's CQWW RTTY contest in the same way as I have imported
other logs over the years but this time, I think familiarity breeding
contempt, I did not take any notice of the highlit line in the
Import/export
Hi,
I have just been given a Iomega usb back up drive for my PC. Can anyone
recommend any software that will enable automatic back-up of my files -
especially DX4Win of course? I have tried iomega's own software and that
keeps failing just on the point of finishing a back-up.
73
Andy G3SVD
Very many thanks to all that have made recommendations; I will have to
consider them before choosing which to go for.
73
Andy G3SVD
-Original Message-
From: Wes Attaway (N5WA) [mailto:wesatta...@bellsouth.net]
Sent: 14 November 2009 15:34
To: 'Andy Hewitt'; dx4win@mailman.qth.net
...@gmail.com] On Behalf Of Jim Reisert AD1C
Sent: 28 August 2009 15:57
To: Andy Hewitt
Subject: Re: [Dx4win] ZK2V
LoTW always starts downloading from the LAST day you downloaded, so it
only has new confirmations.
Try downloading lotwreport.adi again, but this time with a really old
starting date
I worked Chris ZK2V on 20m on three modes. My qsos were uploaded to LoTW in
June and were immediately shown ad QSL'd. They appear as such in the Award
Credit Matrix with X for each mode and 20m. Since that date I have
downloaded a lotw report a couple of times but this entity does not flip the
Jim,
Will all the latest versions of the various data files be included with the
download of ver 8 once it is published?
73
Andy G3SVD
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: DX4WIN Reflector dx4win@mailman.qth.net
Sent: Monday, 3 August, 2009
Thanks Jim.
I did not want to downloading all your lovely work into Ver 7.06 only to get it
all anyhow in ver 8.0. We really do appreciate your efforts.
Very many thanks
Andy G3SVD
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Andy Hewitt andyphew
Jim,
Questions questions Questions I know, but will there be any upgrade
instructions necessary other than those that have been on your pages for yonks?
I would not vwant to lose and DXCCs or paticularly LoTW credits. Grid squares
on 6m etc.
73
Andy G3SVD
I have just uploaded 24 recent 6m QSOs to LoTW but have a glitch. The
actual upload was for 27 QSOs as I also added some very old QSOs into my log
for some QSL cards that I found for some contacts back in the 1980s. When
the QSOs were uploaded every thing seemed OK but I noticed that my total log
Well guys,
I don't know what to make of it. None of these 27 QSOs could have been
uploaded before. Nothing show about duplicate records on LoTW Your
Account/Your Activity tab. There it just shows an upload of 27 QSOs with 6
QSLs. Below is a copy of the Activity report. It is only when I
Of Jim
Reisert AD1C
Sent: 09 July 2009 19:12
To: Andy Hewitt
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] FW: DX4Win/LoTW help and advice please - Again!
Andy, I'm very confused by your description.
First, have you read this application note, from beginning to end?
http://dx4win.ad1c.us
I was very grateful for the advice given to me on here a couple of weeks
ago. But what I was trying to do then did not work out so I wonder if you
can help me again please.
The problem is that when I did my first log upload to LoTW last year I did
not enter my location details into the system.
I have a selection from my main log (Filter - selection) covering a period
from last November 1ST 'til March 31st. I now need to export this selection
as an ADIF file but have not been able to do so yet. I have saved it as a
.csv file ( right click on logbook window - write to file) but that does
the SUBMITTED award flags and then
rehitting SUBMISSION with the same result. I just cannot see how those 391
cards will fill in all the gaps.
73
Andy G3SVD
_
From: Mike Rhodes [mailto:w...@roadrunner.com]
Sent: 13 January 2009 11:04
To: Andy Hewitt
Subject: Re: [Dx4win] New Application
Jim,
As I said in my direct email many thanks for producing this application
note. One thing that I do not seem to be able to get right is the
SUBMISSION. As I have never submitted an application for DXCC using cards
I have something like 1300 cards to be checked if I apply for separate mode
and
Can somebody please tell me how I can save copy of my log for November to
another log file within DX4win without putting at risk the main log file. I
need to be able to do this for our local club winter contest.
73
Andy G3SVD
___
Dx4win mailing
Hi,
This morning FK8CP was spotted on the cluster on 7016 cw. However in the
DX4Win DX spot window it was only indicating that it was worked but not
confirmed (blue type). I have worked FK on other bands but not 40m and I
have it confirmed only on 20m. Other countries in the same situation i.e
2008 12:48
To: Andy Hewitt
Subject: Re: [Dx4win] DX Spot window
Andy,
If you haven't already done so, check the awards listings under preferences.
If those are not set appropriately (whatever that is for the award(s) you
chase) the program won't respond appropriately regarding the priorities
If anyone is using DX4Win with an IC706mk11g could they please advise me of
the CAT control settings? I have been using this system successfully from my
DX location for around ten years and cannot remember the settings.
Unfortunately I had a nearby lightening strike which took out the
HELP!
I am operating from XE1 at the moment and have had a log for my operations
here set up as xe1-g3svd for the past 10 years. Today I opened up the log as
usual (it seemed) and was operating nearly all day on 6m and worked in excess
of 40 US stations. From time to time I had to close
an error in the manual implying that it's 4E and your unit may have
defaulted to that.
73, Joe
K2XX
Andy Hewitt wrote:
Hi all,
Can any one help with setting up an IC706mkIIG to talk to DX4Win? It used to
work FB but suffered damage from a nearby electrical discharge. It was
returned to ICOM
I have 7.02 working now but, in my case still very strange results when I
click on a spot. I was on 14260 and clicked on a spot for a stn working cw
split on 18MHz. The rig went to split mode but left the RX on 14260 and
qsy'd the TX to 18150. I have checked this with other spots and result is
For a local club contest could somebody please tell me how I can copy qsos
for 80m from my normal log into a special contest log over the period 1Nov
thru 31 March, I don't want to affect my normal station log or risk losing
the qsos.
73 es thanks in advance.
Andy G3SVD
Could someone please explain how I can export some QSOs, made yesterday, in
ADIF format in order to submit them in a contest log. The QSOs form part of
my normal qso log.
73
Andy G3SVD
! is there anyone out there that has a solution!
The strange part about this is that using version 6.04 it worked FB.
73
Andy G3SVD
-Original Message-
From: Roger Borowski [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 12, 2005 2:37 AM
To: Andy Hewitt
Subject: Re: [Dx4win] Rig control
: Saturday, November 12, 2005 3:17 PM
To: Andy Hewitt; DX4WIN List
Subject: Re: [Dx4win] Rig control DX4Win Ver7.01
copy the file from version 6.04 dx4win6/radios/ xx to your new
dx4win7/radios folder
and see what is happening with the radio
probely the files is screwed or you did find a bug
W1TJL [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 12, 2005 4:22 PM
To: Andy Hewitt
Subject: Re: [Dx4win] Rig control DX4Win Ver7.01
Hi Andy, I use the 950SDX and the 690SAT both with Version 7.01 with
no problems. However I did originally have an issue of the radio
(950) not changing the 2nd
Bill,
Many thanks for your investigation. I recently upgraded from 6.04 to
7.01
and found that i could only read about 50% of any qso.I investigated and
found that the version of 7.01 that I downloaded also had the psk core file
115. Now I have downloaded pskcore119, it prints out very
GE all,
I could do with a little help. Recently I upgraded from 6.04 to 7.01, now
when I want to qsy to a spot and click on the station in the spot window the
only thing that happens is that the rig changes to cw mode whether or not
the spot is cw. The program shows the change of band and mode
I have been a DX4win user for at least ten years but I have only just got
around to trying to print qsl labels. In the course of setting up I was
advised that it would print out the labels for 410 cards. As I have only
just set one QSO so for a label I was very surprised! Maybe the programme is
I have two rigs connected to DX4win a TS950SDX and a TS570S as Radios 1
2. Could somebody please tell me why the TS570S times out after being
connected for a few minutes. If I click on start Radio it has no effect
until I have switched the rig off and back on again. If I select the TS950
it will
MY COLOUR PREFERENCES WERE NOT TRABSFERRED TO THE NEW DIRECTORY EITHER.
73
ANDY G3SVD
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of J. F. Samuels
Sent: Saturday, January 22, 2005 6:57 PM
To: DX4WIN List Server; Paul van der Eijk
Subject: [Dx4win] Low
-Original Message-
From: Andy Hewitt [mailto:[EMAIL PROTECTED]
Sent: Saturday, January 22, 2005 3:55 PM
To: [EMAIL PROTECTED]
Subject: RE: [Dx4win] Instructions for Upgrading from 6.03 to 6.04
Alan N5PA,
Many thanks for your instruction - this is simpler than those given
GM All,
Just a thought - I personally have gone away from serial ports. I am
using
USB interfaces for rig control etc. produced by MicroHam, I am using these
ti interface with IC706mk11g/TS570 and TS950SDX all work FB, and if I need
more USB connections I can just buy a splitter.
Try
GM all,
I have just upgraded from 6.02 to 6.03, without loading the latest ver
9 of
the country file, yet. despite a few hic-cups initially everything is
working fine. BUT - when I checked the DXCC wkd/cfmd reports I am 200
countries down approx. I transfered the .CTY file from the old
Hi,
I have been using ver6.02 for a couple of years and as there is a new
country .CTY file I decided to upgrade both the Prog itself and .cty file.
In the FAQs it says that you should create a .INI file, find the line
RC=XXetc. in the SYSTEM section and delete it. I cannot find this line.
All
-Original Message-
From: ANDREW HEWITT [mailto:[EMAIL PROTECTED]
Sent: 30 March 2004 16:19
To: [EMAIL PROTECTED] Qth. Net
Subject: Kenwood TS570S
GA all,
About a week ago I was asking for assistance on connecting my
TS570S to the PC to control it with DX4win ver 6.02. A
Hi all,
I am running dx4win ver6.02. and want to control two rigs
TS950SDX( which I have been contolling for years thru ver 4.xx), and a
TS570S which I cannot get the program to recognise. The Kenwood options
offered in preferences--radio are:-
Kenwood / 850-950(that works for my
48 matches
Mail list logo
