I have a Windows problem.
I usually have the SAME CALL window open, but I seem to have lost it. It is
showing as open in the DX4Win WINDOW menu but I have been unable to recover
it.
I am sure it is my screw up but can somebody tell me how to get it back,
please?
73
Andy G3SVD
Hi,,
Could someone advise please me how I can extract a copy of my log for 2021
so far from my lifetime log? I have been trying and I almost deleted al of
those QSOs!
Please advise.
73
Andy G3SVD
__
DX4WIN mailing list
Home:
Hi I have used RTTY - AFSK a lot in the past using the 590SG with MMTTYY and
DX4Win. Selecting LSB and DATA mode the rig mode has, I think, shown RTTT.
Certainly it was logged as such. However since FT8 etc appeared there has
been very little RTTY on the bands. But today I worked 9X4X on17m RTTY
Hi I hope there is some one on here who can advise me? I am running DX4Win
ver 9.0.9.1259.
I recently had a problem with the SOUND setup in my W10 PC and could not
operate digi modes. That seems to now be resolved as I can now operate
WSJT-X (not that I really want to) and RTTY directly to the
Hi,
I was very surprised to see that there exists the version 9.0, even more so
when I looked up at the title bar to see that I already have it 9.0.9.1259
even!
Many thanks Paul. What a great service.
73
Andy G3SVD
__
DX4WIN
HI I need some advice please. I am in the process of loading up a new W10
Laptop. The predecessor had DX4Win 8.05 loaded with the data updater. I have
loaded DX4Win 9.03 and my key. That is working OK but I am not sure if I
need to download a newer UPDATER or whether I can copy over the one I
Hi,
I am running DX4Win 9.0.3.1160 and just updated using Jims Updater prog
dated Jan 23rd but it does not recognise Z6 as being valid.
I understood that the latest version had automatic updating anyhow. How do I
switch this on (if possible) and, more importantly how do I get it to
qualify Z6
Hi,
I have just installed 9.03 on my W10 PC and it all seems to be good. Only
two matters worry me. It seems that I cannot enlarge the QSO entry window,
the menu bar is on two line and some of the text is outside the relative
fields. This was not the case on 8.05. Is there a way to make the
Gary,
I have not been using FT8 much or for long until recently although I did dip
my toes in some weeks ago. Now, however, I have worked a few new ones for
the UK CDXC marathon and as they count I might as well transfer them to my
DX4Win 8.05 log. But I did see some instructions somewhere
I have just ordered DX4W ver.9+ and I believe that I am already subscribed
to the reflector although I have not been on here for ages.
Could someone please confirm that is the case and I don't need to
re-subscribe?
73
Andy G3SVD
From: andyphewitt [mailto:andyphew...@btopenworld.com]
Sent: 08 October 2017 14:07
To: DX4Win sales (sa...@dx4win.com)
Subject: USING FT8
Are any members of the reflector, still using DX4Win, now using FT8?
I have just started doing so and just uploaded some QSOs into DX4W, they all
Hi All,
Can anyone advise me if Paul is going to update DX4W?
I have been a happy user of the prog for more years than I care to count
but I am now in the process of changing the PC in the shack for a modern
machine running Windows 10. I am therefore thinking I should be using a
modern
Hi=, I have just purchased a TS590SG and I'm in the process of setting it
up. I have it working 100% with the Kenwood ARCP control program but I have
not yet been able to get it to talk to DX4Win. I have tried the basic
KENWOOD settings on the RADIO page of preferences and also the TS870 with no
Hi,
I am taking delivery of a TS590SG tomorrow, it will replace a TS570S, and
become my main (only) 6m rig as well as a stand by should my 950SDX not
behave.
Can anyone advise if there is a specific new .rig file for this rig and if
it will interface with DX4Win please?
Are there any tips
On Tuesday I posted a question on this reflector concerning how to upload
LoTW confirmations from DX4Win to ClubLog.
Thanks to John 5B4AHK I have the solution. All one has to do is, when you
have downloaded the lotwreport.adi file following an upload to ARRL, and
imported that into DX4Win. You
I am using version 8.05. Just now I was checking something on ClubLog and
noticed that some QSOs were just showing as worked (W) and not confirmed (C)
as I knew them to be. Once a week or so I produce an ADIF file and do an
upload to LoTW using the functionality of DX4W and TQSL. I wait a while
I have just been having difficulty importing an ADIF contest log into
DX4Win, I don't know what the problem was but after various attempts it
eventually worked and the QSOs are appearing in my log. Now I want to export
the past 2 weeks QSOs to LoTW and ClubLog. But when selecting export to
Lotw in
Hi Wes,
Thanks for the advice, I actually did a fresh install of DX4win but copied
over the .ini file and the SAVE directory then the licence key. Everything
works, I think, although I have not yet connected it up to a rig, except the
DX4Win internet connection. I have a good internet connection
Can I add my name to the list please?
Andy G3SVD
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Ricardo Navarrete
Sent: 11 October 2013 00:27
To: Bud Semon N7CW
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Using 2Tone
I am running DX4W ver8.05 and as of yesterday afternoon the bandmap is
longer being populated. Spot are passing through the DX Spots window but not
appearing on the bandmap. Why should that be, it has been working OK for
some years.
Something changed yesterday.
Any Ideas anyone?
73
Andy
.
Andy G3SVD
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of andyphewitt
Sent: 21 June 2013 11:02
To: 'DX4WIN Reflector'
Subject: [Dx4win] Help with a small problem please
I am running DX4W ver8.05 and as of yesterday afternoon
...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim Reisert AD1C
Sent: Monday, June 03, 2013 7:38 PM
To: andyphew...@btopenworld.com
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] LoTW problem v 1.14.1
On Mon, Jun 3, 2013 at 10:27 AM, andyphewitt
andyphew
Jim,
Sorry - I thought you had to be logged in so that you could do an upload.
Obviously I am wrong so that anyone can upload.
My mistake.
73
Andy
G3SVD
-Original Message-
From: jjreis...@gmail.com [mailto:jjreis...@gmail.com] On Behalf Of Jim
Reisert AD1C
Sent: 03 June 2013 18:05
To:
Today I had a situation, my screen froze and to get out of it I had to
reboot. When I rebooted and started DX4Win it opened apparently as normal
but only showing QSOs up to March 3rd. I have some ADI files covering part
of the missing log which I produced on March 11th and again on March 19th
for
where you save your log and after
reboot, dx4win came back to its original configuration where it found an
old dxl file. Search your computer for *.dxl and *.~xl
good luck
73 Kostas, SV1DPI
Στις 20/3/2013 15:51, ο/η andyphewitt έγραψε:
Today I had a situation, my screen froze and to get out of it I
Hi,
Could somebody please advise me how I can generate an ADIF file of my log in
order to upload it to ClubLog?
I have done this before but a few years ago and it worked Ok but I tried to
generate the file from the Report drop down menu as g3svdlog.adi but it
does not seem to have worked and
10:58
Para: dx4win@mailman.qth.net
Assunto: Re: [Dx4win] Generate ADIF file of entire log
FileImport/export and select Adif
73 Kostas SV1DPI
Στις 16/1/2013 2:03 μμ, ο/η andyphewitt έγραψε:
Hi,
Could somebody please advise me how I can generate an ADIF file of my
log in order to upload
I am in the process of getting set up to make an online application. On the
ARRL website they recommend that one uses a logging program to produce an
ADIF file of the QSL card details. Can anyone please tell me where I can
find details of how to go about this using DX4Win? Or, tell me what to do?
Garry,Kjell,
Thank you for your replies and please pardon me for my ignorance. However I
don't think these will do what I want. I am OK as far as LoTW is concerned
now there are a good number of QSOs for which I want to submit the QSL cards
via an on-line application and get the cards checked by
29 matches
Mail list logo