Dear All ( Gary, Matt, Alan and others),
Thank you for your kind responses.
Last night, after reading e-mails, I have carefully checked the problem again,
and I saw that, problem was disappeared when I press the top of the front
panel, and it did not repeat until I went to the bed.
I wi
Bruce Beford-2 wrote:
>
> Eric,
>
> Would it be possible to release an app note listing the component value
> changes you mention:
>
> "We increased coupling caps and a few other values in the audio chain to
> increase low freq audio response below 300 Hz."
>
> This way, those of us who feel
tom kenville wrote:
>
> Problem has surfaced when running (it seems) with HRD. HRD Ver 5.0 build
> 2290 Beta
>
> In particular CW. Seems that the paddle and straight key are
> mis-behaving.
> Skips early part of break in. perhaps the first 20-30 msec ?
>
> Example: sending W6TJK is get W6
This is a very plain vanilla setup. I'm using an iambic paddle plugged
into the paddle input and my straight key into the key input. Other
than my KUSB connection between my rig and my laptop, which runs Vista,
there is no other connection. And with the K3 in TX Test, there is no
RF possibly
Thanks to all for response and offers for N-Gen. I have sourced one.
73,
Mike
N4JX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.ne
HRD creates quite some RS232 tfc. You see this when spinning the VFO knob and
watching how fast the HRD screen is following. So I guess that RS232 speed
could be an issue. K3 default is 4800bps. I'm using 38400bps and do not have
any keying problems.
73, Markus HB9BRJ
--
View this message in con
Geoff, I believe I read in one of the posts somewhere recently that a
1.2.10.30 version is coming out soon. My version that is the .9 version
tells me the same thing.
73, Len K3LJ
Geoffrey Downs-2 wrote:
>
> Having installed the above latest Utility version, when I start it and
> click
> o
This morning my K3's keyer is behaving erratically - long dashes from
dash paddle, dashes from dot paddle, gaps in strings of continuous
dits. This is my first time transmitting since installing the most
recent firmware a couple days ago. I had HRD connected at the time.
The stuff I've tried
Hi Nick,
I still can't duplicate this. Please describe exactly how both the K3
and HRD are set up.
In particular: Do you have a sub receiver, or at least have the aux
DSP module installed? K3 MCU rev 3.41 allows applications to query the
revision number of the aux DSP even if the KRX3 itsel
Has anyone ever adapted the nice K1 stand to use on a K2. I hate that dammed
wire stand on such a nice looking radio.
Mike
KD8DVV
H. Michael Pierce
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: htt
S meter...what's an S meter??
Doug
W6JD
- Original Message -
From: "Ted Roycraft"
To: "Elecraft"
Sent: Thursday, October 8, 2009 12:08:52 PM GMT -08:00 US/Canada Pacific
Subject: Re: [Elecraft] K3 and XG-2
I was beginning to think that I was the only one who never looks a
I'm getting a similar thing here. I have no KRX3 and have HRD (latest
version) communicating with the K3 at 38400 baud. If I send a series of
dahs, every so often the dah becomes a dit. If I send a series of dits then
that seems okay.
The paddle is plugged directly into the K3 and there is no o
Stephen Prior wrote:
> I'm getting a similar thing here. I have no KRX3 and have HRD (latest
> version) communicating with the K3 at 38400 baud. If I send a series of
> dahs, every so often the dah becomes a dit. If I send a series of dits then
> that seems okay.
>
> The paddle is plugged direc
Is the hardware mod to the DSP board required to see any effect from the f/w
change in
3.41?
That's primarily it. We increased coupling caps and a few other values
in the audio chain to increase low freq audio response below 300 Hz.
when combines with the latest f/w beta release it results in
3.41 fixed the occasional big roar but an occasional small tone remains when
NR is on and something else switched.
73, Dunc, W5DC, K3 user as of yesterday
--
View this message in context:
http://n2.nabble.com/3-41-incomplete-fix-tp3797237p3797237.html
Sent from the Elecraft mailing list archive
Dunc,
Please send me as much derail as possible about this if/when it happens.
Tnx
Wayne
N6KR
http://www.elecraft.com
On Oct 9, 2009, at 1:56 PM, Dunc Carter - W5DC wrote:
>
> 3.41 fixed the occasional big roar but an occasional small tone
> remains when
> NR is on and something else s
Hello Vic
No, I have not, but I will take a look at it tomorrow. I have never looked
at that HRD option before. Time for bed here!
73 Stephen G4SJP
On 09/10/2009 21:02, "Vic K2VCO" wrote:
>
> Stephen Prior wrote:
>> I'm getting a similar thing here. I have no KRX3 and have HRD (latest
>> v
I think I can prevent this with a change to K3 firmware. If so, I'll
get another beta version out as quickly as possible.
Wayne
N6KR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.q
Wayne Burdick wrote:
> Dick,
>
> What version of HRD are you using?
>
> tnx
> Wayne
>
> On Oct 9, 2009, at 3:28 AM, Dick Roth, KA1OZ wrote:
>
>> This is a very plain vanilla setup. I'm using an iambic paddle
>> plugged into the paddle input and my straight key into the key input.
>> Other
I just sent a new version of K3 firmware to everyone who reported a
problem with HRD and K3 revision 3.41.
Turns out that HRD (Ham Radio Deluxe, a PC software app) polls for sub
receiver status periodically, even if one isn't installed, which can
result in long timeout delays. In the new rev
Wayne,
No SubRX here - I have tried HRD with the new firmware and have found no
problems here so far. I will pound on it more later.
73,
Don W3FPR
Wayne Burdick wrote:
> I just sent a new version of K3 firmware to everyone who reported a
> problem with HRD and K3 revision 3.41.
>
> Turns out
Sinse installing the latest beta release I have a problem with a loud tone
when I engage the NB. Has anyone else experienced this or am I just doing
something wrong?
Jim G4NWJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
I get a continuous tone when engaging NR, but it requires switch tones set
to on and my FL1 filter to be engaged. Wayne has tried to help me find the
cause without success yet.
Steve N9SZ
-Sinse installing the latest beta release I have a problem with a loud tone
-when I engage the NB. Has any
Snip
Since installing the latest beta release I have a problem with a loud tone
when I engage the NB. Has anyone else experienced this or am I just doing
something wrong?
Jim G4NWJ
End Snip
Hi Jim
I tried turning NB on/of several times, altered the settings several times and
did not hear any
I think that what he's describing is an issue with when changing bands, the NR
goes off during the switch over, and all of the noise floor that was being
suppressed comes back up making a loud noise.
> From: n...@elecraft.com
> To: d...@vibrotek.com
> Date: Fri, 9 Oct 2009 14:12:59 -0700
> CC
Unfortunately, the noise doesn't go away by itself.
73, Dunc, W5DC
The Smiths wrote:
> I think that what he's describing is an issue with when changing bands, the
> NR goes off during the switch over, and all of the noise floor that was being
> suppressed comes back up making a loud noise.
>
>
Here's another bug that now occurs with v 3.41 and I didn't notice this
before updating.
I assigned the programmable function button "PF1" to switch the
configuration menu item "SPKR+PH", now if I have NR on and I try to
switch the external speaker on and off by holding the "PF1" button I get
a
Is the Yamaha cm500 headset stereo or monaural.? I must have missed this
info somewhere in the postings. Thanks Bob K7lay
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmf
Bob
I've always had my PF1 set up like that and always leave my phones plugged
in. I've tried switching with NR on and it works perfectly. There must be
another factor involved.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: "Bob Allen"
To: ; "Elecraft support"
Sent: Frida
> Is the hardware mod to the DSP board required to see any effect from the f/w
> change in 3.41?
No.
The hardware mods improve the *TX* audio path low frequency response from all
three sources (front microphone, rear microphone, line in). They also improve
the Rx low frequency response for *he
Stereo
K6KR
Sent from my iPhone
On Oct 9, 2009, at 8:09 PM, k7...@aol.com wrote:
> Is the Yamaha cm500 headset stereo or monaural.? I must have
> missed this
> info somewhere in the postings. Thanks Bob K7lay
> __
> Elecraft mai
I have mine set up exactly the same way and I can't reproduce your problem in
any mode or at any setting of NR. F/W 3.41, s/n 1417.
Rob
> Date: Fri, 9 Oct 2009 22:58:05 -0400
> From: mc...@gmavt.net
> To: elecraft@mailman.qth.net; supp...@elecraft.com
> Subject: [Elecraft] NR and PF1 key noise
32 matches
Mail list logo
