Hi Eric
Thanks for the email.
It's not a problem. really. In fact
I'm now seriously thinking of buying a 2nd kpa500 amp for SO2R!
Cheers
Ken..G0ORH
Sent from my iPhone
On 3 Aug 2011, at 16:55, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
wrote:
When the back panel switch
In a recent message, Ken Chandler g0...@sky.com writes
I'm now seriously thinking of buying a 2nd kpa500 amp for SO2R!
Cheers
Ken..G0ORH
Sent from my iPhone
Alternatively, Ken, you could operate your second KPA500 in parallel to
run the full 1kW ;-)
73 de David G4DMP
Sent from my Netbook
SO2R means single operator two receivers. Where does a second linear
come into this?
73 Dave G3YMC
On 4 Aug 2011 at 7:46, David Pratt wrote:
I'm now seriously thinking of buying a 2nd kpa500 amp for SO2R!
Cheers
Ken..G0ORH
Alternatively, Ken, you could operate your second KPA500 in
Dangme thunked it meant Single Operator Two Radios...my bad!
:-)
Gary
On 4 August 2011 17:15, Dave Sergeant d...@davesergeant.com wrote:
SO2R means single operator two receivers. Where does a second linear
come into this?
73 Dave G3YMC
On 4 Aug 2011 at 7:46, David Pratt wrote:
Correct - a 'Radio' is really a receiver. Perhaps he meant SO2T -
'Single Operator, Two Transceivers'
The use of the word 'Radio' to mean 'Transceiver' migrated from the
world of CB :-( In amateur radio we always used to refer to our
equipment as a rig or a transceiver. But the CB world has
Hi
I have just joint the elecraft mailing list as I am interested in the K3.
However I am a Linux user, and as such always have problems with (not)
available software from vendors of most equipment for Ham Radio, among other
things.
I have already sent a couple of emails to K3 support but so
Hello Nick and welcome to the Elecraft list.
Yes, the K3 utility is certainly available for Linux and you can get it
at
http://www.elecraft.com/K3/software/k3utility_1_4_1_8.tgz
I cannot claim to be a user of Linux myself, but you might like to give
the above program a go.
73
David G4DMP
In
Excuse me..
Ken..G0ORH
Sent from my iPhone
On 4 Aug 2011, at 09:46, David Pratt da...@g4dmp.fsnet.co.uk wrote:
Correct - a 'Radio' is really a receiver. Perhaps he meant SO2T -
'Single Operator, Two Transceivers'
The use of the word 'Radio' to mean 'Transceiver'
Thanks for all the responses! They were very helpful.
I'm off to the drawing board.
73
David
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Don - do you mean diode across the K6 and K7 relay coil or do you
mean connect at the NO contact of K5 ? From schematic in Rev E Owner
Manual, it looks like K5 normally open contact provides 12T that
connects to both K6 and K7 coils. The PN preamp + MAR3 are
powered by same 12T, and I
Thanks, David
I have already tried it but it will not work on my box, as it is an old binary
and will not run on a new Linux platform. Still, I was hoping for a reply from
Elecraft, but perhaps they are on their vacation.
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website:
Colin,
No, I mean that D15 would be better connected directly to the coil of K5.
Right now, the cathode of D15 is connected to the cathode of D14.
You can cut that short trace between the diode cathodes and solder a
short jumper from the cathode of D15 to the K5 coil + side - it will be
Neoklis,
To obtain a reply direct from Elecraft, send email to supp...@elecraft.com.
Some of the people at Elecraft (mostly Wayne Burdick and Eric Schwartz)
do monitor the reflector on occasion, but there are no guarantees.
We are a list of users who try to help each other.
Yes Gary has been on
Thanks David, I will wait for him to settle at work ;-)
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website: http://www.qsl.net/5b4az/
- Original Message -
From: David Pratt da...@g4dmp.fsnet.co.uk
To: Neoklis Kyriazis n5b...@yahoo.com
Cc:
Sent: Thursday, August 4,
Ok, I understand what you mean. I'll open up the XV and compare to
the schematic, as it shows the D15 across the coil, cathode not to
D14. But nothing across K7, K6 coils on schematic.
I've had a problem with output spikes on switching sometimes - power
meter will show 1 bar for a fraction of
OK Charles,
It doesn't work on Arch X86-64 because it has no 32 bit compatibility. If
needed, I could add 32 bit compatibility via multilib.
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website: http://www.qsl.net/5b4az/
- Original Message -
From: Charles
OK Don,
I did write to support a couple of times over the last few days, but I did
think they are very likely on vacation, so I thought I should try the list
also. Everyone is very helpful.
Thanks and 73 - nick 5B4AZ
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website:
Hi Neoklis,
The binary I downloaded from Elecraft works just fine on my Linux netbook,
running Ubuntu 11.04, there wasn't any problems either before or after I
upgraded from 10.10, so I don't know why it doesn't work for you. What
output do you get - maybe there are some library packages you need
I need a BL2 balun for my 44' Doublet project. If anyone has one they don't
need/want, please contact me off list.
pasek...@umn.edu
tnx
de George
WD0AKZ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/WTB-BL2-tp6652733p6652733.html
Sent from the Elecraft mailing list
The hum seems to be the 50 Hertz power supplies?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA-500-HUM-from-PA-and-not-from-Speaker-tp6647675p6652787.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hi Thomas
The problem is that I have installed a 64-bit only Arch Linux X86-64 distro and
the utility is 32-bit. If necessary I beleive I can install multilib, which
could give me 32-bit compatibility so the utility can run. I will try later
after I finish some upgrade work on some of my Ham
Mine is 6.25 (15.9 cm).
Ron AC7AC
-Original Message-
Hi All,
Can someone tell me the height of the K3 with the tilt stand extended?
I guess about 6 inches.??
I don't have a K3 yet but need to allow for it in case I get one for
Christmas.
I'm constructing a new shelving system on the
Hello,
I want to remotly control my K3 with Ham Radio Deluxe and LogMeIn Hamachi
If someone have this working will appreciate help in private since this is
not 100% elecraft topic.
I have my K3 connected to HRD working properly
I have LogMeInHamachi in two notebooks and the are seeing each
Anyone operating RTTY regularly on 6? If so what frequency do you make most of
your QSO's? Been trying to find an active 6 meter RTTY frequency with no luck.
According to ARRL, 50.700 is the calling freq, but even during openings, never
hear anyone on RTTY there.
Jim - W0EB
Advance notice for list readers and our loyal Elecraft customers:
We will be increasing prices slightly on the K3 and several other
products during September. If you have been undecided on when to order,
this is your chance.
Orders received before the price increase will be honored at the
Hi, Jim...
There was a recent call for input about usage on VHF/UHF, and your
topic (or an extension of it) was one that I mentioned (fairly strongly).
The general idea I wanted to convey is that there are many times
when signals are marginal on 6 meters, and that a mentality that
On 8/4/2011 3:48 PM, Jim Sheldon wrote:
Anyone operating RTTY regularly on 6? If so what frequency do you make most
of your QSO's? Been trying to find an active 6 meter RTTY frequency with no
luck. According to ARRL, 50.700 is the calling freq, but even during
openings, never hear anyone
Eric - Thanks as always for the advanced notice; I'm sure I'm not the only
one who appreciates the alert.
I hope we all will reciprocate by honoring your request to NOT ask for
further details.
--Andrew, NV1B
On Thu, Aug 4, 2011 at 12:03 PM, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com
I have the following books for sale:
1. Antenna Theory Analysis and Design - Hardcover Text Book by
Constantine A. Balanis
Second Edition - New condition, still has the program disk (3.5)
sealed inside front cover.
$65 shipped US only.
2. Semiconductor
Good Day Everyone,
Is there an *easy* (i.e., efficient) way to search the list archives other
than month-by-month? Have I simply overlooked the obvious?
Tnx es 73
John KK4BOB
--
John Flynn
Tallahassee, Florida
USA
__
Elecraft mailing
Hi John. I think there is more than one archive of this list. This one:
http://elecraft.365791.n2.nabble.com/
has a search box in the upper-right corner.
73, Wayne Conrad KF7QGA
On 08/04/11 10:44, John Flynn wrote:
Is there an *easy* (i.e., efficient) way to search the list archives
Thank you. Thank you. Thank you.
73
John KK4BOB
On Thu, Aug 4, 2011 at 1:48 PM, Wayne Conrad wcon...@yagni.com wrote:
Hi John. I think there is more than one archive of this list. This one:
http://elecraft.365791.n2.nabble.com/
has a search box in the upper-right corner.
73,
Jim,
Yes I have worked a few RTTY and mostly PSK 31 on 50.280 - 50.290.
You could also run JT65a , That's a fun mode. Also Meteor scatter.
73 Ken K5DNL
--
From: Jim Sheldon
Hi Neoklis,
Installing the 32-bit compatibility libraries (ia32-libs) should solve the
problem with 64-bit Linux. I expect you will find many Linux apps will require
the 32-bit libraries.
David, W4SMT (Author of K3 Utility for Linux)
From: Neoklis Kyriazis
All I'll say, is shame we can't order the KX3 before the price increase :)
73, Thomas M0TRN
On 4 August 2011 17:26, Andrew Moore andrew.n...@gmail.com wrote:
Eric - Thanks as always for the advanced notice; I'm sure I'm not the only
one who appreciates the alert.
I hope we all will
Colin,
The XV blinking all the powerbar lights is quite a different problem
which really has a simple solution (in all cases I have seen it). In
some setups, it seems that noise is coupling onto the signal line to the
firmware IC which triggers that situation (pin 26). A .001 to .01 uF
I don't get it. What is a price increase on a product we don't the price in
the first place?
Love my two K3s
George, W6GF
--- On Thu, 8/4/11, Thomas Horsten tho...@horsten.com wrote:
From: Thomas Horsten tho...@horsten.com
Subject: Re: [Elecraft] Elecraft price increases in September
I believe he was engaging in subtle humor.. :-)
73, Eric WA6HHQ
---
www.elecraft.com
On 8/4/2011 4:42 PM, george fritkin wrote:
I don't get it. What is a price increase on a product we don't the price in
the first place?
Love my two K3s
George, W6GF
--- On Thu,
Please ignore... Test Message
Richard Griest - WB4VMH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
It is with a heavy heart that I report the passing of Tom Hammond, N0SS,
at 0125 UTC Friday, August 5th.
Tom died peacefully with his family around him at his residence in
Jefferson City, Missouri, following many battles with cancer over the
last 15 years. No one I have ever known handled
It is really a piece of sad news and I will miss Tom.
73,
Johnny VR2XMC
從︰ K9ZTV k9...@socket.net
收件人︰ Elecraft elecraft@mailman.qth.net
傳送日期︰ 2011年08月5日 (週五) 12:04 PM
主題︰ [Elecraft] TOM HAMMOND, N0SS, SILENT KEY
It is with a heavy heart that I report the passing of Tom Hammond, N0SS,
at 0125
RIP Tom,
Thanks for all your work on the K3 (and other projects).
Jeff Cochrane - VK4BOF
Elecraft K3 #4257 + PR6 + K144XV + KPA500 #166
- Original Message -
From: K9ZTV k9...@socket.net
To: Elecraft elecraft@mailman.qth.net
Sent: Friday, August 05, 2011 2:04 PM
Subject: [Elecraft] TOM
Hello Everyone,
If you missed it here is Song's posting on the QRP and HF pack group
meeting this week-end. If you're in the Bay Area please stop by and say
hello.
73,
---Paul AK1P
Original Message
Subject:[QRP-L] NorCal QRP club/HF pack meeting
Date: Wed, 3 Aug
Thanks, David
I also feel this is the problem, as you say some apps also need 32 bit support,
notably Skype. But it would be nice to recompile the utility on an X86_64
platform, as this is now becoming the common platform.
73's de 5B4AZ
Regards
Neoklis - Ham Radio Call 5B4AZ
QTH Locator
Kent,
Thanks for the news, but yes, it leaves me with a very heavy heart. Tom
was a great friend, and Tom's courage was contagious. His experiences
helped me deal sensibly with my own battle with cancer and chemo
treatments. He will be sorely missed.
Yes, I am one of those cancer survivors
Oh, my. Terribly sorry to hear that. Tom was a good guy, good op, good
friend, just a wonderful human being with so much optimism, determination
and courage. We'll all miss him a lot.
/Rick N6XI
On Thu, Aug 4, 2011 at 9:04 PM, K9ZTV k9...@socket.net wrote:
It is with a heavy heart that I
46 matches
Mail list logo
