Dick,
Yep! Its that simple. I have two RS audio cables to interconnect K3
line-in and line-out to my soundcard and my Elecraft USB/RS232
adapter cable to provide keying. For my applications I have PTT-KEY:
DTR-RTS so that DTR keys PTT and RTS provides CW keying. This
probably differs by t
Fellow K3'ers,
Anyone have experience hooking up the RoMac Software for the Call IDer? I am
having difficulty interfacing and setting it up correctly. For me, the RoMac
instructions are difficult to follow. I am using an XP computer with USB to
serial adapter.
Thanks,
Griff N5AG
--
View this
To populate the logging window with a call sign shown in the receive window,
just right-click on it and DM-780 should copy in the call and do the lookup.
73,
Roger
N5RWK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/list
Thanks Wayne - you are correct - that XMIT button does it, although my
installation makes it cumbersome to use that method. I will look into the ACC2
option in the morning. I do see that my KX3 has a “splitter” plugged into the
ACC2 jack and I labelled it “PTT: KPA500”. I have my station set up
Jim,
I assume the microphone is a computer type, and that means it has an
electret element.
That mic need bias voltage. Did you turn on bias in the Mic Select menu?
73,
Don W3FPR
On 11/12/2014 9:15 PM, James Bennett wrote:
Need a little help on this one. I have an inexpensive mic/headset th
John said:
Elecraft K3 remembers the MODE per VFO; when it says "SPLIT N/A", it
is because VFO A is in MODE=DATA, but VFO B is in some other MODE. To
fix it: switch VFO_A/B, change MODE to DATA, switch VFO_A/B, then hold
SPLIT.
A much easier way to do it is hit A->B twice in succession, which
Jim,
Since most soundcard data applications will allow the TX frequency and
the RX frequency to be different on the waterfall, there is usually no
need to put the K3 into split mode unless the offset is greater than the
2.7 kHz bandpass. Check your WJST software to see if it can lock the TX
I sent this a few minutes ago from my iPad Air, and the posting email I got
back said “this message has no content” Huh? So I’m re-sending it again, this
time from my iMac. Sorry if it is double posted. This just isn’t my night…..
Need a little help on this one. I have an inexpensive mic/headset
Jim,
The KX3's mic jack has some special wiring to work with the MH3. As
alternative, you can use the ACC2 jack (2.5 mm) to wire in a PTT switch. This
is discussed in the KX3 owner's manual -- see the ACC2 IO menu entry. This
would allow you to use the mic jack with your headset/mic.
Also note
Need a little help on this one. I have an inexpensive mic/headset that has a
three connector plug (TRS). If I plug it into the Mic jack on the KX3, it works
fine, although I have to use VOX, which, having an 18 month old in the house,
is not a good choice! I've only made a few SSB QSO's (I'm pri
KX3 rev. 2.27 is now available for beta test (see release notes below).
Instructions for loading beta firmware can be found on our KX3 firmware page:
http://www.elecraft.com/KX3/KX3_software.htm
NOTE 1: If you don't see the new releases on our web site, it's probably
because your browser has
Thanks!!!
73
jim
ab3cv
On Wed, Nov 12, 2014 at 8:50 PM, John Nogatch wrote:
> On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller wrote:
> > Is there a technical reason why split isn't available in DATA-A?
> >
> > It would be nice to use since DATA-A nukes all the equalization stuff and
> > would all
On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller wrote:
> Is there a technical reason why split isn't available in DATA-A?
>
> It would be nice to use since DATA-A nukes all the equalization stuff and
> would allow WSJT to do split as needed.
>> ... about setting Transceiver to spilt. I am using
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the equalization stuff and
would allow WSJT to do split as needed.
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qt
ORIGINAL MESSAGE (may be snipped)
On Wed, 12 Nov 2014 16:11:40 -0600, you wrote:
>
>i am considering purchasing an ACOM 2000A amplifier to use with my K3. all
>comments/suggestions regarding usage, installation, cabling, options, etc.
>are welcome.
>
>thanks
>
>buddy spi
Anyone upgrade from KAF2 to KDSP2 and not using their KAF2 board anymore?
Want to sell it to me?
Anyone purchase any of the other K2 options and isn't using them anymore,
or bought the kit but decided not to build it and wants to sell it?
Recently purchased a K2 + KSB2. Wanting to add some of th
The 700 Hz filters are back in stock just in time for the holiday shopping
season! Hopefully this batch will last us through the end of the year.
A subsequent batch can be expected about four months after this batch sells
out. That will probably be in the April 2015 timeframe, although it's much
On Wed,11/12/2014 2:01 PM, Wes (N7WS) wrote:
Admittedly, I haven't yet tried the digital modes that dig out
imaginary signals from the noise, but on RTTY and PSK I simply can't
see an advantage to a better sound card.
I don't disagree much with that, Wes. Although it might make a
difference w
Probably very true, Wes -- for the K3. I have two
mitigating factors which pushed me to Signalink USB:
* I do PSK31 with my K3 and with my older K2/100
(though not much with that anymore)
* My 10.1" $280 HP notebook may or may not have
an adequate sound card; but access to AF in
and o
i am considering purchasing an ACOM 2000A amplifier to use with my K3. all
comments/suggestions regarding usage, installation, cabling, options, etc.
are welcome.
thanks
buddy spiegel, w3bs
__
Elecraft mailing list
Home: http://mailman.
Operationally, at least with a K3 and the modes I operate I've seen no
difference between the built-in sound card on my Lenovo T400, a TASCAM US-100 or
a SignaLink.
Admittedly, I haven't yet tried the digital modes that dig out imaginary signals
from the noise, but on RTTY and PSK I simply can
There's a review of the Hardrock-50 amplifier kit written by Phil Salas,
AD5X in the December QST.
73
Ken - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Wed,11/12/2014 11:50 AM, dm...@nexicom.net wrote:
using the mic input is a problem because of noise presumably because
you have to set the levels way to low so that the line output of the
K3 doesn't swamp the mic input and by this you drastically narrow the
dynamic range. would building so
Jim Im just curious
using the mic input is a problem because of noise presumably because
you have to set the levels way to low so that the line output of the
K3 doesn't swamp the mic input and by this you drastically narrow the
dynamic range. would building some sort of attenuator at the m
Believe its . if you look at the sample macros, the 73 macro has
in it.
scott
sasimp...@gmail.com
On Wed, Nov 12, 2014 at 12:30 PM, Ian - Ham wrote:
> If you're using macros, there is a macro command (something like
> ,
> I don't recall exactly off the top of my head) that you can insert into
>
There is also a situation with using DTR or RTS to key the rig.
When the computer boots, those port signals will be 'wiggled' active as
the OS tests the ports. It does not matter if the signals appear in a
real serial port or a USB to serial adapter - it will still happen.
If you are using DT
On Wed,11/12/2014 10:06 AM, RIchard Williams via Elecraft wrote:
All I did was connect the line out on the K3 to the mic in on the computer
(using a stereo cable) and the line in on the K3 to the headphone jack on the
computer.
Yes, it works. The headphone out to the K3 is good enough for all
The best is to key PTT via the serial port either use RTS or a
command. most good digital programs will do this for you. I use
VSPE so that I can use serveral programs at once that access the
serial port that controls the rig like MMSSTV and logger. and RTS
and DTS will pass through the
The major problem with using VOX for digital modes is that often hams
forget to turn off Windows Sounds and end up transmitting those sounds
on the air. Listen to the data mode sections of the bands and you will
hear it.
If you are using the internal soundcard, turning off Windows Sounds is
th
If you're using macros, there is a macro command (something like ,
I don't recall exactly off the top of my head) that you can insert into your
"73" macro to handle it. Also, you can right-click on the call sign and
there is an option on the pop-up menu to log the call.
Hope this helps.
73 de,
A lot of people use VOX instead of PTT for digital modes. —wunder
K6WRU
CM87wj
http://observer.wunderwood.org/
On Nov 12, 2014, at 10:06 AM, RIchard Williams via Elecraft
wrote:
> Jorge,
> Interesting enough, at a recent club meeting, the presentation was on using
> the SignalLink as an inter
Jorge,
Interesting enough, at a recent club meeting, the presentation was on using the
SignalLink as an interface between your radio and computer to operate Winmore
using RMS Express. Until reading all the threads the last couple of days, I
was contemplating purchasing a SignalLink; however,
Does anyone use a small microphone such as the speaker/mic type. Watson
makes one, QS-112E but is available on EBay UK. Looking to go small. Any
advise would be appreciated.
Rick NK 9G
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://w
Ken,
Do you know what a "permanent 270v rail fault"
means? First I've heard of it.
As a KPA500 I've been following your Blown Fuse
posts with interest.
Phil W7OX
On 11/12/14 9:03 AM, Ken Chandler wrote:
Hi
Just to update, and there are a few interested etc, I have now some new 6v250v
fst
Hi
Just to update, and there are a few interested etc, I have now some new 6v250v
fst blow fuses.
The amp now switches on, data from the err log sent off to Elecraft engineer
yesterday.
But having connected k3 - kpa500 back together today, the amp turns on now ok,
but it has a permanent 270v ra
Just a friendly reminder that the W6SFM Bug Roundup event will be held
this Saturday the 15th at 1800 UTC through 0600 UTC !
It's time to Grab that bug, clean those contacts, and let’er fly! Let’s
hear that “Banana Boat / Lake Erie Swing" or that commercial KPH/WCC
quality fist.
We're going to
Right mouse click on it.
Gerald
On Nov 12, 2014 8:56 AM, "Paul VanOveren" wrote:
> Just getting back into psk and everything working ok, except cannot
> remember settings to populate the Add Log Entry window with the call signs
> that appear in the receive window. I want to be able to click on
Just getting back into psk and everything working ok, except cannot
remember settings to populate the Add Log Entry window with the call signs
that appear in the receive window. I want to be able to click on a
stations call sign that is calling CQ and have the call sign appear in the
log entry win
I still have not connected my KSPA100 yet, because the KX3 gets excellent Audio
reports every time. I find that I almost never need phoenetics to help others
understand me. WB6IVF. Gain 42, Compression 9.
Sent from my iPhone this time
> On Nov 11, 2014, at 9:44 AM, Wayne Burdick wrote:
>
39 matches
Mail list logo