Hi:
Has anyone used or had experience using the K3EXREF with this item as the 10Mhz
source:
Trimble GPS Receiver GPSDO 10MHz 1PPS GPS Disciplined Clock with RS232 Port
http://www.ebay.com/itm/Trimble-GPS-Receiver-GPSDO-10MHz-1PPS-GPS-Disciplined-Clock-with-rs232-port-/252162780444?hash=item3ab6
I was curious as to what I would truly gain if I upgrade my K3 to the new K3IOB?
Thank you
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mai
The USB CODEC chip is 16 bit. The sample rate is set by the attached
PC, but is usually 44.1 kHz or 48 kHz.
73,
Lyle KK7P
Any info on the audio bit depth and sample rate?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
On Sat,12/19/2015 12:04 PM, kg9hfr...@gmail.com wrote:
Jim… I think you were the guy that presented at our EMC meeting a long time ago
here in Chicago if.. my memory is correct…
(I have been the Chairman of our EMC MiniSymposium here in Chicago for the past
18 years…)
Yes, that was me. Thanks
I do pretty much what you want to do: use N1MM+ and paddle/external keyer.
I have: paddle connected directly to the K3; QSK selected; VOX selected;
PTT/KEY set to off/dtr; and N1MM+ keying through the serial port dtr line. It
gives full QSK to hear other stations between characters.
73,
Brian
Any info on the audio bit depth and sample rate?
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Eric,
interestingly I didn't get your mail yet, neither the direct one nor
that via the reflector although Chas already responded to it. Who knows
... so will pick his one to answer. Thanks for the explaination. The
insight is much appreciated although not what I wanted to hear. ;-) Will
make
You make a very good case for buying a new K3s.
I chose that route, and after all the finagling and swapping, it cost me under
$500 to go from a 2007 K3 to a brandie new 2015 K3s.
Heckuva deal if you axe me.
I must add that the recovered audio is absolutely THE best I've heard from any
tran
That's true, Lynn. Nevertheless it's a question of perspective. I
already own all the other features of/with the KIO3 so I can only make
up my mind on the additional features and decide if it's worth it or not
as that is what makes the difference for me. If they would offer a trade
programm, i.
Thanks for all the replies.
Ah, it all makes sense ... now. I kept thinking that the SWR signal was
being sent from the K3S to the P3 via the RS232 port. Wrong.
So, guess I have, with the P3 SWR display, something of an antenna analyzer.
Nice to be able to have the K3S provide an "adjusted" SWR an
Also note that the KIO3B has all of the original KIO3 analog and digital
functionality and HW. Adding the usb sound and USB data hw to that did not
increase the end price by over $200.
Lastly at ham radio market volumes, which are much lower than most consumer
products, the cost to develop and
unsubscribe
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this ema
Hi Olli,
Yes, 389.95 is the correct price.
This is not a single board. It is a three board set that costs much more than
our old KIO3B to manufacture. The board set also now contains a new USB Codec,
USB Comm port, Internal USB hub and additional logic to handle routing of data
between the U
So now into the winter months, I have an issue where I have RFI getting into
things.
After some searching.. I found an excellent guide by our own Jim Brown.
Jim… I think you were the guy that presented at our EMC meeting a long time ago
here in Chicago if.. my memory is correct…
(I have been th
Ditto
-Original Message-
From: "pe1bsb"
Sent: 20/12/2015 5:03 AM
To: "elecraft@mailman.qth.net"
Subject: Re: [Elecraft] K3IOB
same for me
William PE1BSB
Sent from my iPhone
> On 19 dec. 2015, at 19:51, wrote:
>
> I have been anxiously waiting for the K3IOB but also find the pri
Maybe, but how do they sell the "sound card part" without selling the
KIO3A parts?
On 12/19/2015 11:07 AM, Oliver Dröse wrote:
Would have expected something in the 200 US$ price range but 400 bucks
for an "USB sound card" (as this is the only functional difference to
the KIO3A) is too heavy fo
Would have expected something in the 200 US$ price range but 400 bucks
for an "USB sound card" (as this is the only functional difference to
the KIO3A) is too heavy for my liking, too ... will probably keep going
with my microHAM USB III then ...
73, Olli - DH8BQA
Contest, DX & radio projects
same for me
William PE1BSB
Sent from my iPhone
> On 19 dec. 2015, at 19:51, wrote:
>
> I have been anxiously waiting for the K3IOB but also find the price much more
> than expected, so now suspect I will not order one.
> Emory WM3M
>
> -Original Message- From: Robert Vargas-KP4Y vi
I have been anxiously waiting for the K3IOB but also find the price much
more than expected, so now suspect I will not order one.
Emory WM3M
-Original Message-
From: Robert Vargas-KP4Y via Elecraft
Sent: Saturday, December 19, 2015 1:01 PM
To: Wes (N7WS)
Cc: elecraft@mailman.qth.net
S
I agree w/ Peter on this. I also find the price for upgrade outrageous. But,
Mr. Schmidt's comment was out of line.
73,
Robert-KP4Y/W4
Sent from my iPhone
Sent from my iPhone
Sent from my iPhone
> On Dec 19, 2015, at 8:38 AM, Wes (N7WS) wrote:
>
> Eric is the moderator of this list.
>
>>
The WinKey http://k1el.tripod.com/ , in conjunction with N1MM
Logger+, does this beautifully. It has separate delay
adjustments for paddle-generated and computer-generated CW. You
can set the computer delay to zero and the paddle delay to a hang
time of 1 to 2 letter spaces, so the paddle del
Once you have enabled VOX, you are stuck with whatever delay it imposes.
In effect, the VOX and PTT functions are in a logical OR relationship -
if either one of them wants the rig to be in transmit, it will be in
transmit. In your current setup you could disable computer PTT control
entirely a
Eric is the moderator of this list.
On 12/19/2015 4:27 AM, Peter Pauly wrote:
Let's remain civil on this mailing list please.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.n
Hi Robert,
If you are using VOX there should be no difference in the delay between
using your paddle and using your PC. It sounds like N1MM is still sending a
PTT command over the serial link. You can prove this by changing
CONFIG:PTT-KEY to OFF-OFF on your K3.
73,
Mike K2MK
s57aw wrote
> Hi,
>
I will be getting a KX3 in the next couple of months and I do like the form.
My K2 sits next to the K3. I switched off the K3 and am working a few Qs in
the RAC contest on the K2.The K2 has a great look, I just thought it might
be a nice option if the KX3 was also offered in a similar case to the K
Hi,
Simple question... Is there a way to avoid VOX delay on CW mode when PTT is
used?
To be more concrete:
- CW and PTT signal are sent to K3 with N1MM directly from serial port (no
external keyer)
- external electronic keyer is connected to K3
- VOX is enabled
If I want CW keyer to work withou
Hi
I have a K3 with KPA500 P3 and KAT 500
According to the manual I am to connect the COM2 form the RRC-1258 to RS-232
and IO to ACC on the K3 but the K3 has cables going to the P3/KPA500/KAT500
so how do I connect the RRC-1258 to my full K Line?
Wishing you and your family a Merry
Let's remain civil on this mailing list please.
On Fri, Dec 18, 2015 at 11:15 PM, Dr. William J. Schmidt, II <
b...@wjschmidt.com> wrote:
> Son of a bitch.
>
>
> Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
>
> Owner - Operator
> Big Signal Ranch – K9ZC
> Staunton, I
28 matches
Mail list logo
