Re: [Elecraft] Switching to Linux

GenLog is for Windows but runs well in Linux using WINE. Good contest logger. I have not been able to get the K3 memory editor to work using WINE however. -- View this message in context: http://elecraft.365791.n2.nabble.com/Switching-to-Linux-tp7612946p7612982.html Sent from the Elecraft

Re: [Elecraft] K3 won't transmit split (SSB) if monitoring sub

Ron: You will probably find that VFO B is not on the same mode. I have just gone thru that with one of my K3's in that VFO B was set to LSB. I have no idea how it happened, but it did it for every band. I must have done a global setting somehow to mess it up. I had to go into every band and

[Elecraft] K5P and VP8STI

It will be interesting to find out more about the antennas being used by these two DXpeditions. Both, as I understand it, are using Elecraft gear, K3's and KPA500's. K5P has been rather weak but copyable on most bands, at least here in AZ. I had expected to hear them a bit more easily,

Re: [Elecraft] K3 won't transmit split (SSB) if monitoring sub

Ron: One other thing to check, what is your KRX3 menu setting at. I think it should be ANT=ATU, I can't remember there might be one other setting, it has to do with the output of the sub receiver ie Ant 1, Ant 2 or BNC. Hope that also helps, I just don't have the manual handy at the moment.

Re: [Elecraft] Switching to Linux

* On 2016 22 Jan 17:39 -0600, Mike Markowski wrote: > I think someone else got further on such a project but can't recall the > program name. Maybe someone else can. There is the CHiRP project: http://chirp.danplanet.com/projects/chirp/wiki/Home I don't see the K3 listed, although there is an

Re: [Elecraft] AGC Settings

Donald, The AGC settings, particularly the slope and the threshold are best set to your individual preferences. There is no setting that is perfect for everyone - that is why Elecraft allows the parameters to be varied instead of providing one setting for everyone. For guidance on how to

Re: [Elecraft] Buying k2 or kx3

If your primary concern is performance, the KX3 is your answer. You should be able to find a QRP only K2 with ATU for $600-700. An equivalent KX2 will be over $1000. I have a KX3 and a K2, but use the K2 as my base station and only rarely use the KX3 at home. Something about a rig I have/can

Re: [Elecraft] K5P and VP8STI

As a fellow Tucsonan here are my observations. I believe that the K5P guys are using tunable dummy loadsorry...SteppIR verticals on all bands except 160. (If I'm wrong about this, I'm sure I will be corrected.) I too believe that their signals have generally been underwhelming for the

Re: [Elecraft] Fwd: OT Mystery QRM Help (Video)

If one is serious about finding noise, I've found this item to go a long way in identifying down to the building or site from which it originates. It takes a bit of practice and time to triangulate but does work well. I'm sure there's other equipment and methods available as well.

Re: [Elecraft] K5P and VP8STI

My good friend Stan, KE5EE, currently has 22 slots on the K5P. On Thursday he put up temporary inverted V's for both 60 and 160. Within 12 hours, he had worked K5P on 60 SSB and CW, as well as on 160 CW. He doesn't have as many slots with the VP8, but he hasn't really been chasing them. He is

[Elecraft] Buying k2 or kx3

hello all, new to the list, hoping to buy a k2 or kx3 within next couple weeks. I was hoping to find used k2, but seems like all the ones I find are just couple hundred less than used kx3. Seems like the kx3 is well worth 200 more. I only do Cw / Qrp , and just looking for opinions, thoughts

Re: [Elecraft] Buying k2 or kx3

Jim - I’ve owned both rigs. The K2 was a very nice radio, but IMHO, the KX3 blows it away. Your options are far more extensive. If you do want to operate SSB or digital some time in the future - it is built in right from the get-go; no additional boards to install and mess with. Want a band

Re: [Elecraft] Posting new Thread on Reglector

The KX3 DVR stores the message after TX EQ and compression have been applied. That makes it handy for evaluating levels of compression. I wrote up some collected hints here: http://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/

[Elecraft] FOR SALE: KX3/PX3/KXPA100AT CORRECTION

FS: KX3, PX3, KXPA100, KAT100 SETUP, plus KX3 and PX3 Nifty Desk Stands and PX3 Nifty Mini-Manual. Includes all manuals and cables that came with equipment. Purchased new factory assembled July 2015. 36 QSOs to date. Everything in excellent to mint condition; works perfectly or complete

Re: [Elecraft] Switching to Linux

I'm using WINE, on Mint, with N1MM+ that works very well for contests.. I am also using Win32 for a logger. Too bad I can't find something that does both. Have a great day, --... ...-- Dale - WC7S in Wy

Re: [Elecraft] K5P and VP8STI

Dear OMs, I have as part of my antenna system a BigIR Vertical but perhaps this is part of the problem. With stepper motors it would not be wise to put this antenna too close to the water line. For 80M it would not be too good because of the loading coil. Standard verticals might have

[Elecraft] KXV3A For Sale - $95 Shipped

I just upgraded one of my rigs from a KXV3A to a KXV3B. This KXV3A will accept the internal 2 meter option, K144XV. Includes the KXV3A, rear panel plate, TMP cable assembly and mounting screws. The manual is available on line. Pic available. $95 shipped priority mail to USA. Rich - N5ZC

[Elecraft] FOR SALE: KX3/PX3/KXPA100AT

FS: KX3, PX3, KXPA100, KXPAT100 SETUP, plus KX3 and PX3 Nifty Desk Stands and PX3 Nifty Mini-Manual. Includes all manuals and cables that came with equipment. Purchased new factory assembled July 2015. 36 QSOs to date. Everything in excellent to mint condition; works perfectly or complete

Re: [Elecraft] K5P and VP8STI

Something can be learned from their websites. There have also been posts to the NCDXC reflector from K6MM, one of three members on that trip. Wes is correct about K5P antennas, except that they have a Battle Creek special for 80 and 160M. Photos of the SteppIRs suggest an inadequate radial

Re: [Elecraft] AGC Settings

Agree with Don't comments. If signals are blowing your ears off, you need one of the following: lower AF Gain lower AGC Threshold higher AGC Slope (higher SLP value is actually flatter curve which technically is a lower slope) I encourage everyone to learn and understand how to set up their

[Elecraft] Posting new Thread on Reglector

RE: [Elecraft] KX3; Procedure for Setting TX CMP & TX EQ + DVR I desire to utilize both CMP and TX EQ in SSB transmissions on a KX3. In the KX3 Owners Manual, there are well defined procedures for setting Mic Gain, CMP and TX EQ, but it leaves doubt as to which to

[Elecraft] AGC Settings

After installing the new Synth board in my K3 all is well except I notice that on strong CW signals the AGC is not keeping that signal from blowing my ears off when listening to a DX pileup. I am mostly a DX CW operator, and my present AGC settings are: AGC HLD = 0.30 AGC PLS = NOR AGC SLP =

[Elecraft] Elecraft K2/10 For Sale

For SaleElecraft K2 / 10 watt TranceiverOptions include SSB / 160 meter /KDSP2 /Internal ATU /RS232 / MH2 hand micBuilt by Larry (AE4LD) of LNR PrecisionAligned and calibrated by Don Wilhelm W3FPRLike new conditionPrice $750.00 & you pay to shipAdditional items to go with the K2

[Elecraft] Fwd: OT Mystery QRM Help (Video)

A bit more: I watched this mystery QRM pretty closely for an hour Friday evening as 20 meters closed for the day (by 6:30pm PST). The cadence of this noise changed. It slowed. Then faded away with the band. I’m scratching my brain to try think of a mechanical device that would create that kind

[Elecraft] Soldering station recommendation in preparation for building a K1

Hi. I am preparing to build the Elecraft K1, and am seeking a recommendation for a temperature controlled soldering station mentioned in the K1 assembly guide. Any suggestions? Thank you. -- Mark __ Elecraft mailing list Home:

Re: [Elecraft] Anti Static Bench

Rich, I agree with Alan - there is no information about the "ESD qualities" of that top. You may have better luck if you contact a local cabinetmaker and ask him to build a top using laminate (like a kitchen countertop) to whatever size you want. Then get a proper ESD mat from a good

Re: [Elecraft] Fwd: OT Mystery QRM Help (Video)

Yes, but David says, "only occurs on 20M", so this may not hear it at 135MHz?   Need portable like KX3 and small mag loop tuned to 20M. On Saturday, January 23, 2016 2:14 PM, Bob McGraw K4TAX wrote: If one is serious about finding noise, I've found this item to go

Re: [Elecraft] Anti Static Bench

Places such as LOWE'S and HOME DEPOT carry stock counter tops. Usually in 4 ft, 6 ft, 8 ft and 10 ft lengths of several different colors. Standard depth including the back splash is about 25".I have used one for years. Choose a light solid color as it makes small parts easy to find.

Re: [Elecraft] Anti Static Bench

I agree with the previous responses. ESD material does wear out, especially in my dry climate. It has to be replaced once in a while. In commercial operations is is tested on a schedule and discarded if it does not pass. It has to be conductive enough to keep parts from damage and resistive enough

Re: [Elecraft] Kenwood TS-590SG with KPA500 amp?

As Mark points out, the latest firmware (at the beta page) works quite well with Kenwoord transceivers. If you are using the KPA500 with a Kenwood transceiver, be sure to update your firmware to V1.47 - you should see a difference in how well it works. And, if you have any comments, I’m all

Re: [Elecraft] Soldering station recommendation in preparation forbuilding a K1

Hi I use a Weller WES51. You can get it and all accessories at digikey 73 Tom va2fsq.com -Original Message- From: Mark Petrovic Sent: Saturday, January 23, 2016 10:11 PM To: elecr...@qth.net Subject: [Elecraft] Soldering station recommendation in preparation forbuilding a K1 Hi.

Re: [Elecraft] Soldering station recommendation in preparation forbuilding a K1

Here a WES51, too. An excellent choice. Phil W7OX On 1/23/16 8:01 PM, Tom wrote: Hi I use a Weller WES51. You can get it and all accessories at digikey 73 Tom va2fsq.com -Original Message- From: Mark Petrovic Sent: Saturday, January 23, 2016 10:11 PM To: elecr...@qth.net Subject:

Re: [Elecraft] Soldering station recommendation in preparation for building a K1

Mark, Most any temperature controlled soldering station will do a good job for you. I use the Hakko 936 soldering station although I believe that has been discontinued. Circuit Specialists does have a knock-off of the Hakko 936 which takes the same tips. You might want to consider something

Re: [Elecraft] Soldering station recommendation in preparation for building a K1

I have the Hako FX888D I love it. I work in electronics manufacturing and our factory equipment guy recommended them. http://www.amazon.com/gp/search/ref=sr_1_5_acs_h_2i_2593162011_13837391?ie=UTF8=1453611442=8-5-acs=13837391=2593162011=hakko+soldering+station On 1/23/2016 9:11 PM, Mark

Re: [Elecraft] Soldering station recommendation in preparation forbuilding a K1

Circuit Specialists in the Phoenix area has a nice assortment. I have found them a reliable mail order source as have others. Just a customer. David K0LUM > On Jan 23, 2016, at 10:01 PM, Tom wrote: > > > Hi I use

Re: [Elecraft] Soldering station recommendation in preparation forbuilding a K1

Ditto here on the WES51 solder station, very well-built and reliable. 73 Darrell AB2E From: Elecraft on behalf of Phil Wheeler Sent: Saturday, January 23, 2016 11:47 PM To: Elecraft Reflector Subject: