Somewhat related to my other post, but sufficiently different that I
figured it should be its own thread: I consistently get the "Timeout in T>R
Latency Measurement" message from Winlink Express using the built-in
software Winmor TNC.
After some poking around and trying different things, I set up
While spending some quality time with the K3s tonight, I noticed that if I
switch on the "listen to" feature in Windows to listen to the USB codec
microphone audio through my computer speakers, I always hear the audio when
transmitting; ie, it behaves as though the audio being sent out the USB
Code
Your suggestion of my listening to me
transmitting into a dummy on another radio
was a good idea. However, I pulled my
backup K3 out of its box & replaced the
K3s with it. It's Serial #202 but it is
updated to the final K3 specs and has most
of the K3s upgrades so I just switched one
for the
If you are using the MH4 Elecraft mic plugged into the front panel. Set mic to
“FpL -bias”. Set EQ to flat. Set Cmp to zero and adjust micgain for 4-5 bars
ALC. Now adjust Cmp to provide about 10dB and get on the air and get
assistance from someone who knows your voice.
If you’re having inter
As per list guidelines, no personal attacks please.
Eric
Moderator for way too long.. :-)
elecraft.com
_..._
> On Oct 10, 2018, at 3:51 PM, wrote:
>
> Nicely done.
> Anybody suppose he'll find a more "reputable" mail list to troll on?
>
> R. Kevin StoverAC0H
_
No changes in PS operation at all since the early KPA1500s shipped.
If the fans in the. PS do not turn off within 10 secs or so after the RF deck
front panel power button turns it off, please contact supp...@elecraft.com for
help.
73,
Eric
elecraft.com
_..._
> On Oct 4, 2018, at 7:28 PM, D
This thread was closed some time ago. Please, no more zombie threads :-)
Eric
Mooderator
elecraft.com
_..._
> On Oct 3, 2018, at 7:22 AM, Bert Craig wrote:
>
> Why is Elecraft in 2nd place? I know we can do better than that! (Selective
> exposure?) Here's the link.
> https://dx-world.net/wor
Thanks, it's set at 00.
73,
Gary
KA1J
> check MENU CONFIG TX GATE in the tech menu if set to high it will
> do that
>
> Ed KD7PY
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home:
Folks,
Thank you for all the replies regarding
the clipping and a thank you for the
replies regarding proper setting for the
Mic. That's just what I was looking for.
Unfortunately my transmit issues remain.
I'm beginning to think there is perhaps
something wrong with the radio. I was on
40M
check MENU CONFIG TX GATE in the tech menu if set to high it will do that
Ed KD7PY
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://ma
On 10/10/2018 1:47 PM, bill steffey wrote:
Shure manufactures ( or at least did when I repped them) in Mexico at
their plant. They also were maintaining capabilities of manufacturing
in the states,,,
used to be Evanston.. now has plant in Wheeling, IL.
YES. This is generally true of REAL micr
Nicely done.
Anybody suppose he'll find a more "reputable" mail list to troll on?
R. Kevin StoverAC0H
ARRL, FISTS, SKCC, NAQCC.
“If it doesn’t work the first time you push the button it won’t work the
20th…Just stop.”
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Be
First, I don't think any Heil mic ought to be taken as a standard. I
view Heil as most audio professionals view Bose -- "better sound through
advertising."
Second, the SM58 is a single-D cardioid, and Shure's published data is
for the mic at considerable distance from the sound source. When us
Shure manufactures ( or at least did when I repped them) in Mexico at
their plant.
They also were maintaining capabilities of manufacturing in the states,,,
used to be Evanston.. now has plant in Wheeling, IL.
Those old 444 and 450 paging mics were always emphasizing the 2.5 - 3
k region..
At
The SM58 is representative of a wide variety of the hand-held
"vocal" mics by many manufacturers. It would not surprise me
if they didn't use a common element - probably manufactured
off shore - which means the read difference would be in mounting
and the wind screen which would effect handling/
For my SM58 and my K3S I use the following:
50 Hz -16
100 Hz -16
200 Hz - 9
400 Hz 0
800 Hz 0
1600 Hz 0
2400 Hz +3
3200Hz +6
The Behringer XM8500 dynamic mike gives identical performance and it
costs only $20. Heard one and just had to try it. I can swap between
the
My P3 cursors have disappeared. The menu selections are there but the
cursors do not appear when selected. I have the latest P3 firmware loaded.
Ed W5TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
If one has a flat "wide band" mic (electret) the typical TX EQ settings
needed to emulate the Heil HC4 (DX)/HC5 elements, a couple classic
"communications" mics and a typical dynamic "vocal" mic (SM58) are:
-- SHURE --
HC4 HC5D-104 444SM
Amazon reviews are not good for similar cells of the same brand, lots of
references to them popping and leaking chemicals out, sometimes even with
the supposed right charger. They also are reported to lose capacity quickly
with a few discharge cycles. I also expect that 3000 mAh is an
exaggeration.
I have not used them, however I looked at them and the discharge curve shows
a very steep drop in output voltage very early on in the discharge cycle
(15%). Also having to remove them continually increases the potential to
damage the ribbon cable. so I choose to stick with Eneloops
--
Sent from
And if all of this fails look for a blown HPA.
Wes N7WS
On 10/10/2018 8:29 AM, Don Wilhelm wrote:
Gary,
If you just plugged in the MH4 and turned on bias, then I suggest that may be
the cause of the problem.
Assuming you had the K3 set for the low output Heil microphone, you should
change t
Gary,
If you just plugged in the MH4 and turned on bias, then I suggest that
may be the cause of the problem.
Assuming you had the K3 set for the low output Heil microphone, you
should change the MIC SEL menu to FP.L bias. If you have MIC SEL still
set for FP.H, you may be overdriving the mic
Hi Peter,
Although we have not tested that specific brand of alkaline cell, in
general alkaline cells when compared to NiMH or LI cells show much
higher internal resistance. This is of course why they are not as
suitable for high-current use, and though the Duracell cells also
measure 1.55 V
Tom,
The PA voltage connector pin problem will normally result in an ERR 12V
message.
It sounds like something has just gotten "mixed up".
Do you have a saved configuration file for that K3? If so, you may want
to try doing a Reset to Factory Defaults (EEINIT)and then restore the
configura
The main problem regarding Cycle 25 is that I won’t be here for Cycle 26.
Vy 73 de Bob DJ0RD/WU5T (Licensed since 1960)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq
I would look closely at the ALC level and the CMP level to see that the
new mike, which has more output, is not driving things into
saturation. Likewise, as Jim, K9YC says, use the TX EQ to get rid of
some of the low end, thus not to suck up power which is not heard on the
other end. And
I have to agree with Buddy 100% !!!
I’ve owned Elecraft radios for almost 10 years now, it’s all I own !!
I had my KX3 two weeks (s/n 0045) and a glitch appeared, couldn’t use the
radio. I emailed Elecraft on a Sunday night around 10pm, not expecting to hear
from them til Monday morning.
I got an
Hi Gang,
Was doing the New England WX Net this AM on 75m and all of a sudden, NO
OUTPUT...hmmm!
I put it into PA By-pass and still nothing. I can hear the tone in another
RX whether on PA or by-pass but NADA on the watt meter.
Before I send it to the "Mother Ship", I was wondering if t
Hi all,
did anybody tested these PURE ENERGY RAM cells AA size 1,5V / 3000mAh in
KX3?
I found in spec. that they are Alkaline-Manganese technology cells which are
not dedicated
for permanent high current (over 1A) consumption equipment...
It is promising 12V instead of 9.6V in 8pcs pack. the only
29 matches
Mail list logo
