ts) to simulate tapping the dot and dash paddles in the right
sequence at a certain speed, so you wouldn't have to program the memories
by sending on the paddle yourself. But writing new code to do that is
probably not worth the effort.
73,
Bob, N6TV
___
Just measured my SS-25 using my Fluke 77. Measured at the power supply
terminals.
14.10 volts with 1.0 amp load (radio receive)
14.01 volts with a 17.5 amp load (radio 110 watts carrier)
I find a change of 0.09 volts to be acceptable for the load applied.
73
Bob, K4TAX
On 9/24/2024 9
, the service is protected by 2 individual 20 amp breakers. I did
not use a ganged 2 pole breaker.
No ground issues, no hum issues, no buzz issues and no RFI issues.
73
Bob, K4TAX
On 9/20/2024 12:00 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 11
Date: Thu, 19 Sep 2024 10:34:35 -0600
work.
This is far from accurate!
73
Bob, K4TAX
On 9/20/2024 12:00 AM, elecraft-requ...@mailman.qth.net wrote:
I have heard what you describe which seem to
invariably be sounds from MS Windows.
--
You don’t get to choose how you’re going to die or when. You can only
decide how you’re going to
: http://k9yc.com/GroundingAndAudio.pdf
73
Bob, K4TAX
On 9/16/2024 12:53 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 23
Date: Mon, 16 Sep 2024 10:45:07 -0400
From: Ken WA8JXM
To: Martin Schmiedel
Cc:elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 goes deaf when set to 12W or more
. For WSJT-X modes, use Data A.
My viewpoint: More equipment + more cables = more issues.
73
Bob, K4TAX
On 9/16/2024 12:53 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 15
Date: Sun, 15 Sep 2024 09:35:50 -0400
From: Jim Bruce
To:Elecraft@mailman.qth.net
Subject: [Elecraft] Soundcard
Have you checked the 5.0 volt reference value In the CONFIG Menu at ADC
REF? See page 57 in the manual under CONFIG Menu for instructions.
This will/can affect things like rigs supply voltage.
73
Bob, K4TAX
On 9/4/2024 3:49 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 22
Date
and
do not rely on what "others" have said. Again, more incorrect "old ham
lore".
73
Bob, K4TAX
On 9/1/2024 12:20 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 7
Date: Wed, 28 Aug 2024 10:12:45 -0400
From: "Dave New, N8SBE"
To: Elecraft Reflector
Subject: Re:
this makes it much worse. Just
more contact connections to add resistance to the current path.
73
Bob, K4TAX
On 9/1/2024 12:20 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 6
Date: Wed, 28 Aug 2024 12:24:48 +0100
From: G4GNX
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 shuts
Thanks for the info. I appreciate it.
Bob, WG9L
K4F #304
On 7/28/2024 1:17 PM, Bill Weaver wrote:
Logitech MX Mechanical w/Clicky switches. They make models with different
(soft) switches in the MX line. They probably have other 3 channel keyboards
models in their product line also.
My
Bill,
Which make and model multi-channel keyboard are you using?
Thanks,
Bob, WG9L
On 7/28/2024 12:53 PM, Bill Weaver wrote:
I use a multi-channel keyboard and mouse. Channel #1 is MacOS, channel #2 is
Windows and channel #3 is the K4. That way it only costs an extra USB receiver.
73,
Bill
o if the
keying problem returns, simply perform this procedure again.
Then set CONFIG:PTT-KEY to UNSAFE and there will be no more hassles.
73,
Bob, N6TV
On Thu, Jul 4, 2024 at 5:42 PM W3FPR wrote:
> Frank,
>
> Yes it should bring up RTS-DTR after the port is polled.
> When running wit
le of applications that I rarely use and they control the radio
correctly. So I'd say the configuration is handled by and saved the
application and NOT the radio.
One MUST always shut the K3S down by the power switch on the front
panel, and never by the power supply.
73
Bob, K4TAX
On 7/4
What is the AM transmit bandwith on the K4, and is it adjustable? Also, has AM
receive been activated on the K4, and if so, AM selectable sideband sync
detector?
Bob W2VGD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I installed version R35 today, but didn't see any release notes as part of
the update, or on the elecraft website itself.
Any idea what has changed?
73, Bob, WB4SON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
hair splitting issue.
73
Bob, K4TAX
On 4/6/2024 2:03 PM, Fred Jensen wrote:
Hmmm ... I thought that the ALC started AT the 5th bar and the first 4
bars were sort of a VU-meter. Hence Don's occasional advice, "4 full
bars and the 5th occasionally flickering." I've been known to
to prevent any
potential power overshoot. After the initial transmission at the new
power setting, the remainder of transmissions are at the proper power
level setting.
73
Bob, K4TAX
On 4/5/2024 5:50 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 14
Date: Thu, 4 Apr 2024 21:03:20
radio will do the rest.
73
Bob, K4TAX
On 3/30/2024 7:37 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 7
Date: Wed, 27 Mar 2024 10:18:59 -0400
From: Pete Smith N4ZR
To:kpa1...@groups.io, Elecraft Support,
Elecraft List
Subject: [Elecraft] Erratic KPA-1500 behavior
Message-ID
THANKS for posting the result and efforts which took place to get you up
and running. I hope you enjoy your K3S as much as I've enjoyed mine.
73
Bob, K4TAX
Message: 18
Date: Sat, 23 Mar 2024 16:49:27 -0400
From: Carol Richards
To:elecraft@mailman.qth.net
Subject: [Elecraft] K3s
Messa
Here is a direct link to Elecraft covers.
https://www.jse-repair.com/product-category/dust-covers-2/dust-covers/elecraft/
Bob KA9MDP
On Sat, Jan 20, 2024 at 11:42 AM David Rutledge via Elecraft <
elecraft@mailman.qth.net> wrote:
> www.jse-repair.com866-457-3777sa...@jse-repair.com
&g
Bob, K4TAX
On 1/13/2024 3:58 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 5
Date: Fri, 12 Jan 2024 23:28:09 -0600
From: "Michael Reynolds, NO6O"
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT 500 Loses Match
Message-ID:
Content-Type: text/plain; charset=UTF-8; for
an spam and junk e-mail address list. That is how
most of the junk e-mail originates.
73
Bob, K4TAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
magic is the delete option
Bob KA9MDP
On Wed, Jan 3, 2024 at 09:25 jerry wrote:
> Once you find the initial IP address in the headers, you can use any
> number
> of online searches to find out who it belongs to. If you get a notice
> from
> "Fedex", and it's from a
expensive to build and replace a board than pay a good tech a
few hours for troubleshooting.
As the say, "I've been there, and I've done that".
73
Bob, K4TAX
On 12/15/2023 11:57 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 9
Date: Thu, 14 Dec 2023 13:57:33 -0500
F
equipment to do so. There were other reasons as well, but I agree
with Joe, W4TV, the expert knowledge base is in Watsonville.
73
Bob, K4TAX
On 12/15/2023 11:57 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 5
Date: Thu, 14 Dec 2023 13:03:23 -0500
From: "Joe Subich, W4TV"
T
The KPA500 at the station only matches the transmitter to the
transmission line and likewise for the receiver. It does not change
the match between the antenna and transmission line, thus the SWR and
related loss from SWR remains.
73
Bob, K4TAX
On 12/4/2023 8:07 AM, elecraft-requ
I use an external VHF amp with my transverter. Works great! Do be
mindful of the amp switching time. The relay switching time is about 15
ms. I prefer to use hardwire PTT as opposed to using RF detection to
switch the amp.
73
Bob, K4TAX
On 12/4/2023 8:07 AM, elecraft-requ
. After all, that is 1/4 wavelength on 40M.
As to what's in the neighborhood, that's another issue out of my control.
73
Bob, K4TAX
On 12/3/2023 9:52 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 14
Date: Sun, 3 Dec 2023 05:19:39 +
From: Bill Johnson
To:"j...@audios
Just power it from the transceiver power supply and all will be
resolved. There is no point in making life complex.
73
Bob, K4TAX
On 12/3/2023 9:52 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Sun, 3 Dec 2023 01:48:45 +
From: W2HX
To: Michael Carter, Elecraft Reflector
real numbers might be and publish the results. To be fair, one
needs an accurate power meter and a known good 50 ohm resistive load and
a little math.
73
Bob, K4TAX
On 11/13/2023 8:03 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 1
Date: Fri, 10 Nov 2023 09:27:18 -0500
From: Pete
Not only does one have to return the QSL cards, but they must turn in
their EXTRA Class license for a Technician Class license.
73
Bob, K4TAX
On 11/6/2023 2:36 PM, elecraft-requ...@mailman.qth.net wrote:
I wonder how I can work split then on my K3/10 without a 2nd RX...do I have
to return
knob)
5. VFO A is the receive frequency.
That's it.
73
Bob, K4TAX
On 11/6/2023 2:36 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Sun, 5 Nov 2023 21:12:15 -0500
From: Richard
To: Elecraft Reflector
Subject: [Elecraft] K3S Split Operation
Message-ID:
Content-Type: text/pla
If I did my math correct, FT-8 is 46.42% duty cycle. 13+15 = 28.
Therefore (13/28)*100= 46.42%
73
Bob, K4TAX
On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 17 Date: Wed, 11 Oct 2023 21:40:19 -0700 From: David Gilbert
To: elecraft@mailman.qth.net Subject: Re
0163 since 8/2015 at rated
output, 100 watts, on all modes, SSB, CW, FT-8, and a couple of others
with out any issues or concerns. I also run the power supply voltage
at 14.5 at the radio during transmit and 14.8 during receive.
73
Bob, K4TAX
On 10/12/2023 7:33 AM, elecraft-requ...@mailm
, Figure 1 Cabling Diagram, is the better
and safer way to configure the system. NO key line interrupter is needed.
As to the Kenwood, I have no knowledge of the system.
73
Bob, K4TAX
On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 15 Date: Wed, 11 Oct 2023 23:02:09 +
Ken:
I have a K3S with the internal tuner. I find no issues nor concerns in
running 100 watts in any mode. Page 79 of the manual does not address
any reduced power requirement other than operating with a 20:1 SWR (20
watts).
73
Bob, K4TAX
On 10/12/2023 7:33 AM, elecraft-requ
menu PWR SET to Per Band.
73
Bob, K4TAX
On 10/10/2023 7:18 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 23 Date: Tue, 10 Oct 2023 05:17:26 -0700 From: Glenn Maclean
To: elecraft@mailman.qth.net Subject: [Elecraft]
KPA500 / KAT500 and W2 watt meter question Message-ID:
<3a0e28e4-8
Shure SM-58 very successfully. Both sound
good but a bit different.
73
Bob, K4TAX
On 9/28/2023 8:31 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 15 Date: Wed, 27 Sep 2023 13:29:16 + (UTC) From:
E-mail-Server To: "elecraft@mailman.qth.net"
Subject: [Elecraft] Behring
I have the Koss SB-45. Works great and sounds good both ways although I
don't normally use a headset. I do find, as I recall, it has a dynamic
mike element and does exhibit a good amount of proximity effect. Uh,
maybe that is the SB-40. One is dynamic and one is electrect. ???
73
telling or writing.
73
Bob, K4TAX
Message: 20
Date: Mon, 31 Jul 2023 13:20:06 -0700
From: Fred Jensen
To: Geoffrey Feldman
Cc:elecraft@mailman.qth.net
Subject: Re: [Elecraft] A dumb question about lightning
Message-ID:<87985aa1-b606-cec8-f07c-5edbadbdc...@gmail.com>
Content-Type: text/plai
ture.
(C) Each piece of equipment should be bonded to a common point such as
the station power supply , using dedicated bonding jumpers.
All efforts are toward mitigation of lightning damage.
73
Bob, K4TAX
On 7/28/2023 4:14 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 19
From: Al
r the writer of the ALC routine. This prevents
power hunting. The actual Automatic Level Control (ALC) starts AFTER
the 5th bar.
73
Bob, K4TAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
WNERS MANUAL and do what the manufacturer says. (W4TV)
What "others" told is frankly just OLD HAM LORE. The more it is told the more
incorrect it becomes.
There is a correct or right way, and there are many incorrect or wrong ways.
I don't find any in b
AMEN Just keep on keeping on.
73
Bob, K4TAX
On 7/18/2023 11:43 AM, elecraft-requ...@mailman.qth.net wrote:
Good grief.? Get a life.? Not everything in this world is racist, discriminatory
or homophobic. In fact, I'm old enough to remember when being discriminating was
a virtue, a si
ughed at and called a LID. RTFM
There is absolutely NO reason for transmitting a dirty or distorted or
wide signal. NONE! If your signal is dirty, distorted, or wide, it
is clearly the fault of the operator.
73
Bob, K4TAX
On 7/12/2023 3:33 PM, elecraft-requ...@mailman.qth.net wrote:
Me
Jim, K9YC, says about this. In order, attenuate first
and boost last. There is less phase distortion.
73
Bob, K4TAX
On 6/26/2023 8:13 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 20
Date: Mon, 26 Jun 2023 02:05:33 -0400
From: Richard
To: Elecraft Reflector
Subject: [Elecraft] K3s Rec
USB for all bands. The data convention is always USB
regardless of band.
73
Bob, K4TAX
On 6/5/2023 9:58 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 6
Date: Thu, 1 Jun 2023 06:33:29 + (UTC)
From: Karl W Hubbard
To: Elecraft Reflector
Subject: [Elecraft] FS8Call Eureka
Message-ID
When switching to Data/Packet be sure the radio RX BW is 2.7 kHz. The
BW info is stored by mode in the radio.
On WSJT-X Wide Graph, set the Bin/Pixel value to 4.
73
Bob, K4TAX
On 6/5/2023 9:58 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 1
Date: Wed, 31 May 2023 12:53:32 -0400
thod.
73
Bob, K4TAX
On 5/29/2023 8:45 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 12
Date: Mon, 29 May 2023 07:54:54 -0400
From: Pete Smith N4ZR
To:elecraft...@yahoogroups.com, Elecraft List
, "n1mmloggerp...@groups.io"
Subject: [Elecraft] Odd K-3 Symptom
connecting the K-ON plugin has no
surprise side effects. The rig's POWER switch and PS0; commands continue
to function normally, so the rig shuts down properly while the module
remains connected, as shown in the videos. You can still connect a
RemoteRig box in parallel with no issues either; i
them in the feedline where an
unknown impedance exist, one will also have a false power indication.
Exceptions are a calculating power meter that measures both voltage and
current to determine power. Most power meters I find in ham usage are
only voltage sensing devices.
That's all.
73
a 50 ohm dummy
load or place it in the RF path which is 50 ohms nonreactive.
73
Bob, K4TAX
Message: 2
Date: Fri, 7 Apr 2023 16:15:31 -0600
From: Alan Bloom
To: Elecraft Reflector
Subject: Re: [Elecraft] [P3] P3 woes - repaired but now claims my K3s
puts out 873W!
Message-ID: <3fbef
Page 12 in the manual states; "T indicates FM/Tone, CW/DATA text
decode, or AM-Sync auto-tracking."
73
Bob, K4TAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
are very easy
hunting when operating in the Advanced or Extra frequency segment of any
band.
A good operator, selecting 3 kHz above or below any net is good
operating practice. For those that insist on transmitting wide band
audio, do so at your on risk.
73
Bob, K4TAX
On 1/30/2023 12
I have both a Flex 6600 and Apache Labs Anan 7000. Both of them do
diversity, though the Apache Labs handles it by far the best. I don't have
a K4 to compare to them with.
Bob NN5D
__
Elecraft mailing list
Home: http://mailman.qt
I have both a Flex 6600 and Apache Labs 7000. Both of them do diversity,
though the Apache Labs handles it the best. I don't have a K4 to try.
Bob NN5D
On Mon, Jan 16, 2023 at 12:00 PM Dale Boresz wrote:
> Steve,
>
> AFAIK, only the FLEX radios with TWO SCU's (2nd IDENTI
feed line or lightning
protection device is breaking down under power. The SWR meter won't
show this.
73
Bob, K4TAX
On 12/19/2022 4:55 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 19
Date: Mon, 19 Dec 2022 20:59:21 +
From: "David F. Reed"
To:"elecraft@mailman
Pro machine. I did have to install
Microsoft Framework 2.0.
73
Bob, K4TAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I do not use
any external station ground. Lightning protection is accomplished
outside of the house.
Hope this helps.
73
Bob, K4TAX
On 11/23/2022 9:58 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 13
Date: Tue, 22 Nov 2022 22:36:46 + (UTC)
From: Al Lorona
To: Elecraft Reflector
Su
y case, I've tweaked the numbers a wee bit to suit my voice and my
microphone choice.
Listen to your signal by recording it and then playing it back from the
various SDR remote receivers around the country. That way you know
how your station sounds.
73
Bob, K4TAX
On 11/2/20
I've owned a KPA1500 for 13 months now, and am very pleased. After being a
ham for 59 years, I've used several both tube and solid state amps. Today
in my shack, I have 3 amplifiers, and all three are solid state/LDMOS
units, including a Palstar and a Flex. The KPA1500 is hands down my
preferred
off, but why bother? Changing bands with one K3 and one KPA500 from N1MM
is very quick; no advantage to having two K3 radios unless you configure an
SO2R station.
73,
Bob, N6TV
https://bit.ly/Y-BOX
On Fri, Sep 9, 2022 at 2:53 AM Josep via Elecraft
wrote:
> Hi everybody,
> I have a qu
variants).
I find nothing to indicate the LDG100Z will interface with the K3. In
reviewing the signals on the ACC connector on the K3, I do not find one
dedicated to the TUNE function. See page 20 in the manual, ACC(Accessory I/O)
73
Bob, K4TAX
Message: 13
Date: Fri, 02 Sep 2022 16:
Anyone have an extra one?
72, Bob KI0G
Sent from Yahoo Mail for iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
each. Remember, it is always better to attenuate first,
than to boost.
73
Bob, K4TAX
On 8/26/2022 7:15 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 24
Date: Fri, 26 Aug 2022 20:15:32 -0400
From: David Smith
To:"elecraft@mailman.qth.net"
Subject: [Elecraft] INRAD W1
Mess
protection and grounding is always outside of the structure, never inside.
Jim, K9YC and Ward Silver, N0AX in the ARRL book /GROUNDING AND BONDING
for the Radio Amateur/ contains a wealth of correct information. Use
this information to defuse "old ham lore" regarding grounding.
Regardless of specs, there is one fellow when asked about the best radio
will always answer "it is the one you enjoy using".
73
Bob, K4TAX
Message: 7
Date: Thu, 14 Jul 2022 16:44:23 -0400 (EDT)
From: brianpepperdine brianpepperdine
To:elecraft@mailman.qth.net
Subject: [Elecraft]
ces the Elecraft AUX cables with
standard 15-pin cables and is available in various lengths.
73,
Bob, N6TV
https://bit.ly/Y-BOX
On Mon, Jul 11, 2022 at 11:37 AM wrote:
> Why is the Y-Box no longer needed, does the K4 have multiple ACC ports for
> amp, tuner, band decoder and other station
I’ll take it.
7/, Bob KI0G
Sent from Yahoo Mail for iPhone
On Monday, July 4, 2022, 3:52 PM, Lou Laderman via Elecraft
wrote:
Shack cleaning uncovered an old "Nifty KX1 & Options Quick Reference Guide"
(the small one, 2-3/4" x 4"). $1.00 (mostly to cover shipping)
Hello group.
I found a pair of K3 synthesizer upgrade kits and have them installed and
working. So please disregard by previous post.
Thank you,
Bob Hughes
W7SNR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
to didn’t know if a new run was going to happen anytime
soon.
So as a long shot I thought I would see if by chance any of you might have a
pair that I might acquire.
Thanks for reading this post.
Bob Hughes
W7SNR
Cave Creek, AZ
cation and logging application are suspect.
The approach is to launch and run only one application at a time. If it
doesn't work, then debug and find out why and get it working before
moving on. Too many variables may take eons to sort out.
73
Bob, K4TAX
On 7/1/2022 5:27 PM
ents from there.
As to others, they can adjust their receivers, their speakers, their
hearing aids and a host of other things that will make ones signal
sound..err, many different ways. So which one of the "many
different ways" is best? Likely none of them.
73
Bob, K4T
I used my K3S on 6M extensively on FT-8 over the Field Day weekend. I
used WSJT-X with the Radio Mode set for Fake IT .
For the radio I have DATA MD set to DATA A. I think this is band
specific. There should be no difference in the set-up for 6M being the
same for 160M - 10M.
73
Bob
The same thing is happening in our schools and colleges in order
to get desired passing numbers.
73
Bob, K4TAX
On 6/27/2022 1:39 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 4
Date: Sun, 26 Jun 2022 13:21:51 -0700
From: Jim Brown
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] Field
level of non technical expertise? It sure seems so.
Then I was off to 80M and 40M for a few FT-8 contacts. No different.
WOW! This is all very disappointing.
73
Bob, K4TAX
--
IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS,
ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOG
Glad the solution was simple. And THANKS for posting your results. I wish
others would do the same when their issues are resolved.
73
Bob, K4TAX
Sent from my iPhone
> On Jun 15, 2022, at 10:25 AM, N4ST - Jim wrote:
>
> For some reason, my previous post did not show up.
>
&
some random or frequency distant from VFO A? I
suggest setting the WSJT-X Setup to Fake it.
73
Bob, K4TAX
On 6/14/2022 7:46 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 6
Date: Tue, 14 Jun 2022 09:37:33 -0600
From: "N4ST - Jim"
To:,
Subject: Re: [Elecraft] K3S - Hig
I really think NOT!
On the other hand..the DELETE key works well and as to the JUNK
filter, it works too.
73
Bob, K4TAX
On 6/8/2022 10:20 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 19
Date: Wed, 8 Jun 2022 10:37:33 +0200
From:"df...@darc.de"
To:elecraft@mailm
250 watts.
Yes, FT-8 is a weak signal mode. I run near legal limit on 2M to a nice
array just to have a weak signal off of the moon. Low power just won't
get it.
73
Bob, K4TAX
On 6/6/2022 11:29 AM, elecraft-requ...@mailman.qth.net wrote:
From:elecraft-boun...@mailman.qth.neton b
AMP and
RCS-12 controller. If you don't need 5 ft between rig and Y-BOX, replacing
it with a 2.5 ft cable will reduce the the total length (and loss) by a
little bit. But it will probably won't make any difference.
73,
Bob, N6TV
_
e. I can supply a 2.5' M/M cable from rig to Y-BOX if you
need one.
On Thu, Jun 2, 2022 at 6:33 PM wrote:
> Forgot to add in my reply that I have LAN connectivity at the proposed amp
> location, connected directly from the main switch on the other side of the
> b
A long ethernet or a WiFi to Ethernet extender will provide KPA1500 Remote
software connection capability, though you may want to set up your Router
to assign a fixed IP address to the KPA1500. KPA1500 Firmware updates
still require a local USB cable, but you can temporarily use a WiFi-enabled
laptop
15 will be connected, but that will be
sufficient. I could theoretically make a USB to RJ45 cable that would
allow USB connection to the amp. for firmware updates, but the theoretical
maximum length if USB 2.0 is about 15', so that may not work well at all.
73,
Bob, N6TV
https://bit.ly/Y-BOX
Look on menu for sidetone volume
Sent from Yahoo Mail for iPhone
On Tuesday, May 31, 2022, 7:02 PM, Richard wrote:
For code practice, I tried plugging a straight key into the “KEY” jack on the
back of my K3s. I hear a tone when I operate the straight key but the volume is
low and I can’t c
KPA500 / KAT500 has been SOLD.
73
Bob, K4TAX
On 5/30/2022 8:52 PM, Bob McGraw wrote:
Making room for something else. I have for sale my personal KPA500-F
and KAT500-F. Includes cables ready to connect to your K3 or K3S.
Both items have the last release of firmware installed. Both items
Making room for something else. I have for sale my personal KPA500-F
and KAT500-F. Includes cables ready to connect to your K3 or K3S.
Both items have the last release of firmware installed. Both items are
in excellent condition and include cables and accessories. Shown on my
QRZ page.
the problem.
N1MM works in Manual VFO mode.
Suggestions?
72, Bob KI0G
Sent from Yahoo Mail for iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Many many radios are loaded with "whistles and bells". But the better
radio is.the one you enjoy using. If it does everything you
wish, then look no further.
73
Bob, K4TAX
On 5/25/2022 1:18 PM, elecraft-requ...@mailman.qth.net wrote:
From: Al Lorona
To: Elecraft
ill
consume lots of unnecessary transmitter power not being used for
effective communications. 50Hz - 16dB, 100Hz -16dB, 200Hz - 16dB, 400Hz
- 9dB, 800Hz - 0dB, 1.6kHz - 0dB, 2.4kHz +0dB, 2.4kHz +3dB, 3.2kHz + 6 dB.
Works for me.
73
Bob, K4TAX
On 5/20/2022 4:30 PM, elecraft-requ...@mailman.qth.ne
Richard:
Oh yes, there are many knowledgeable folks on the reflector. I'm not one
of them. HI HI
I would ask of you to better define your needs, objective, concerns,
frequency of usage, and such. It will enlist a lot better and specific
answers.
73
Bob, K4TAX
On 5/12/2022 9:
t does not say all SELLERS are
scams. But it does say that all SCAMS are sellers. Sell you something
to get your money, but never get your something, but they get the money.
73
Bob, K4TAX
On 5/8/2022 11:18 AM, elecraft-requ...@mailman.qth.net wrote:
PayPal holding payment. (Follow up)
I believe the K3 has one preamp while the K3S has two. The synth
boards have nothing to do with the preamp.
73
Bob, K4TAX
On 5/8/2022 11:18 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 11
Date: Sat, 7 May 2022 15:40:07 -0600
From: Mike Fatchett W0MU
To:elecraft@mailman.qth.net
antennas and frequencies, then when I go
to 6M the KAT500 goes automatically to BYPASS mode. The other bands
are selected for "last used" by the Utility.
73
Bob, K4TAX
On 5/5/2022 1:49 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 21
Date: Thu, 5 May 2022 07:45:40 -0700
F
results
to an extensive numerical value. OK so be it. It is your amp. I just
choose to run mine in the "quiet" mode of NORMAL {and not suck in a load
of dust by it running all the time} and allow the control system in the
amp to apply the fan and fan speed as so dictated by the software.
urves on their amplifiers. The results are enlightening.
73
Bob, K4TAX
On 4/24/2022 6:48 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 12
Date: Sun, 24 Apr 2022 14:03:55 -0400
From: EMAIL
To: Elecraft K4 Group,
"elecraft@mailman.qth.net"
Subject: [Elecraft] K4D - KPA5
The following link provides some very interesting data regarding many
new and current signals heard on or near the ham bands.
https://www.sigidwiki.com/wiki/Category:Military
73
Bob, K4TAX
--
IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS,
ONE DOESN'T UNDERSTAND COMP
Interesting reading. Also the links are equally interesting.
http://www.southgatearc.org/news/2022/april/iarums-newsletter-military-intruders-in-ham-radio-bands.htm
73
Bob, K4TAX
--
IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS,
ONE
bonded to a
common point. I use the station power supply ground terminal for my
common point. Each piece of equipment has a dedicated jumper to this
point.
73
Bob, K4TAX
On 4/21/2022 7:50 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 13
Date: Mon, 18 Apr 2022 22:20:38 -0700
From
-DTR to enable
computer-generated CW and PTT keying. If not, set it to OFF-OFF
73,
Bob, N6TV
On Mon, Apr 18, 2022, 3:51 PM Rip R wrote:
> Thanks for the help W0VTT, AB7E, & K6MKF. I tried each advice as I received
> it and thought I had it fixed until today. I had been switching out
1 - 100 of 4053 matches
Mail list logo
