Hi,
Just getting some idea on when my order #2135-5082-0730 will be filled.
Thanks very much,
Chuck Hawley, KE9UW
c-haw...@illinois.edu
Jack (ret.)
Jack Hawley MOA and RA #224, KE9UW (Chuck, my first name, for Ham Radio and
Lionel Trains).
So sorry. Meant to send to Elecraft and had the same nickname in my address
file for the reflector and the sales.
Sorry, Chuck, KE9UW
Original message
Date: Tue, 10 Aug 2010 09:25:07 -0500
From: Mark Bayern plcm...@gmail.com
Subject: Re: [Elecraft] Just checking on order #
It's a solid state amp...you just turn it off. Why have two off switches?
Original message
Date: Mon, 09 Nov 2009 16:28:49 -0600
From: Radio Amateur N5GE n...@n5ge.com
Subject: Re: [Elecraft] Macro to Disable Key out
To: Elecraft List elecraft@mailman.qth.net
On Mon, 09 Nov
I forgot to say yes it is bypassed when off. Also I believe if you are using
the vox relay input to key the amp, switching the front panel switch from to
QSK keying instead of RELAY keying will also disable the amp keying.
Chuck, KE9UW
Original message
Date: Mon, 09 Nov 2009
Does this app note apply here?
Application Note: Alternative Wiring for the K2's AF GAIN Control
Wayne Burdick, N6KR, with illustrations by Tom Hammond, N0SS
Oct. 25, 2001
This optional modification greatly reduces the level of noise or other
artifacts that might be heard on a small
From: Gil Cross
Sender: elecraft-boun...@mailman.qth.net
To: elecraft@mailman.qth.net
Subject: [Elecraft] J W Miller coil forms
Sent: Nov 5, 2009 7:05 PM
Hi all. Looking for info as to the diameters or any where this info
could be found of the following:
4500-2
I thought it was when I ordered the autotuner and then the serial port option
(almost just to fill up the hole).
Chuck, KE9UW
Original message
Date: Thu, 29 Oct 2009 12:42:19 -0600
From: Gary D Krause n7...@bresnan.net
Subject: Re: [Elecraft] Elecraft moving this week to larger
Super. Well deserved. Thanks for the excellent and rapid service your company
provides.
But how did I get so lucky to order the accessories for my K2 last week without
knowing you would be moving? Stuff should be here tomorrow.
Regards and best of luck in your new facility,
Chuck, KE9UW
. Version 2.04r firmware eliminated the U6-25 sidetone
output option and will save a lot of support effort in the future.
73,
Don W3FPR
C. J. Hawley wrote:
Thanks. I went back and re-read his note and he did mention K2-T2 as well.
Then I went to the newest manual and K2-T1 and K2-T2
the schematics with me while on
vacation, so you will have to find out which one on your own.
73,
Don W3FPR
C. J. Hawley wrote:
Yes the W6 point gets 8 volts either thru the diode D2 or D6 depending on
whether in receive or xmit. I think I have an oscillator at Q5-Q6. I am
checking all
very closely at the PCB, parts, and
soldering and you might find the problem just with
your eyes.
--
73, Gary AB7MY
=
supp...@elecraft.com
Elecraft Technical Support
C. J. Hawley wrote:
Thanks again for the help. I checked all the 4007's with a Simpson 360 just
to make
-
From: C. J. Hawley c-haw...@illinois.edu
To: elecraft@mailman.qth.net
Sent: Tuesday, October 20, 2009 4:07 AM
Subject: [Elecraft] Just built K2 and finals seem to be oscillating...
I just finished this K2 rev A with most all mods incl B and cannot do the
transmitter alignment.
The finals
Yes. Made me want a W2 just reading this. I just looked at it and it would be a
nice addition to the bench.
Chuck, KE9UW
Original message
Date: Tue, 20 Oct 2009 10:01:56 -0700 (PDT)
From: NZ0T n...@cox.net
Subject: Re: [Elecraft] [MM] W2 Manuals
To: elecraft@mailman.qth.net
I just finished this K2 rev A with most all mods incl B and cannot do the
transmitter alignment.
The finals seem to be oscillating at about 450 KHz on all bands.
The power goes to max (17 watts), the current goes to 3 amps, on the Bird meter
(50 watt slug) I get about 13 watts showing. The
14 matches
Mail list logo