Re: [Elecraft] (K2) CW key

good evening robert, I have this model is very practical in mobile and it's magnetic http://www.palm-radio.de/english/english.html 73 , Christophe F8ACF-56 Le vendredi 30 mars 2018 à 15:33:33 UTC+2, Robert G Strickland a écrit : I am searching for a small CW key that will atta

Re: [Elecraft] K2 paint wanted

Good evening, Ask a car bodybuilder he will do a color scan and will make you a sample with their color scanner they are capable of a lot of things 73 , Christophe F8ACF-56 Le jeudi 7 décembre 2017 à 15:32:13 UTC+1, Dave Lankshear a écrit : Hi everyone.  I'm restoring a

Re: [Elecraft] K2 and kpa 100 (2)

hello don , hello to all , I will put everything in the box I will not have time to work on the KPA100 before mid September Too much work at the professional level Thanks again for the help of forum 73 , Christophe F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56 ; Elecraft Reflector

[Elecraft] K2 and kpa 100 (2)

Sorry for vocabulary mistakes I try to explain at best 73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This l

Re: [Elecraft] k2 and kpa 100

, Christophe F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56 ; Elecraft Reflector Envoyé le : Mardi 27 juin 2017 16h01 Objet : Re: [Elecraft] k2 and kpa 100 Christophe, That is the modification I thought you were referring to. If your K2 serial number is 3000 or higher, that

Re: [Elecraft] k2 and kpa 100

WX R10 1K 470 Ù (# E53) p47, rt. collar. Sheet 1, right R16 10K 100K (# E56) p47, rt. collar. Sheet 1, right D8 n / a 1N4148 (# E560002) n / a (new) Sheet 1, right; Diode add D8 with Cathode to Q18-S (source), Anode to GND Is this what you give me as an explanation dear Don? 73 , Chri

[Elecraft] k2 and kpa 100

, Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] K2 - "INFO 80 " problem

cillator (RF-Z5).   With power ON, check all voltages associated with U1. You should see 6V at pins 1 and 20 at all times, even when the IOC is sleeping (not being accessed by the MCU).   K2 SN 7369 73 , Christophe F8ACF-56 De : Giuliano À : elecraft@mailman.

Re: [Elecraft] K2 cntrl brd res reading

Good evening to all, the values ​​are correct here was also "95 K" and everything works fine K2 # 7369 10 to 100 W in progress   73 , Christophe F8ACF-56 De : wt5y À : elecraft@mailman.qth.net Envoyé le : Lundi 25 novembre 2013 20h28 Objet : [El

Re: [Elecraft] k2 vco alignment

goodnight, I made ​​a mistake for "T5", I put the black toroid "T3" while they should be yellow are both the same size only the color differentiated If this can help you. 73 F8ACF K2 # 7369   73 , Christophe F8ACF-56 De : Rob Gault À :

Re: [Elecraft] K2 and SSB

7369 De : Don Wilhelm À : Ralf Wilhelm Cc : Christophe F8ACF-56 ; "elecraft@mailman.qth.net" Envoyé le : Lundi 20 mai 2013 19h59 Objet : Re: [Elecraft] K2 and SSB Ralf and Christophe, Yes, what you say is true, but the answer is still in the filter alignment. All

Re: [Elecraft] K2 and SSB

Hello Don, I will review it with the page of your site, the problem for me I think is a misunderstanding of the text in your language, but the idea is to learn your language :-) I'll let you know as well as the list of results thank you again for your help  !   73 , Christophe F8A

Re: [Elecraft] K2 and KAF2

thank you Don, Phillip, I found that this is a fast handling that initiates the process, "short press" to change the first "digit" and "long press" for minutes or months! info only understood well go to the twelfth month to set the exact year .. many thank

[Elecraft] K2 and SSB

7369   73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please he

[Elecraft] K2 and KAF2

play" I have to screen "01.01.01" if long press and hold "+ band and band -" I "1/1/01" corresponding to the date I have no response by pressing either "+ or - only" for change. someone an idea of ​​the stupidity that I made? Th

Re: [Elecraft] K2 - KSB2

Good evening to all, yes it is that it is written in pencil "3.6" on the back of the envelope thank you again for your help   73 , Christophe F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56 Cc : "elecraft@mailman.qth.net" Envoyé l

[Elecraft] K2 - KSB2

Hello list, in manufacturing manual it says: Locate the envelope containing the matched SSB filter crystals (X1-X7). On the outside of the envelope you'll find a calibration number that ranges between 3.2and 3.9. Record the number: __. Note: If the envelope is unmarked, use 3.6 in the acc

Re: [Elecraft] K2 and KPA 100

e K2! 73 F8ACF K2 # 7369   73 , Christophe F8ACF-56 De : Ron D'Eau Claire À : 'Christophe F8ACF-56' ; elecraft@mailman.qth.net Envoyé le : Samedi 4 mai 2013 22h50 Objet : RE: [Elecraft] K2 and KPA 100 Yes, it's designed to do just that. Furthermo

[Elecraft] K2 and KPA 100

Good evening to all, is there a way to put off the K2 100 kPa for the 10w version for travel and 100W QRP version home   73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] K2 problem RX

_ De : Don Wilhelm À : Christophe F8ACF-56 Cc : "elecraft@mailman.qth.net" Envoyé le : Mardi 30 avril 2013 15h04 Objet : Re: [Elecraft] K2 problem RX Christophe, What you observe is normal if your sidetone pitch setting is 700 Hz. When using CW mode, the K2 transmit frequenc

[Elecraft] K2 problem RX

l KAF2 under construction and KNB2, KSB2, KPA100 build thank you for your help K2 # 7369   73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: ma

[Elecraft] final test part 3

Good evening to all, I made emissions there fore the results of measurements tests: views of K2 RX dummy load, and ditto TX 3.750MHZ =>RX 13.2V ; 220mA / TX 11.6V; 2.06 A for 10W 3.750MHZ=> RX 13.2V ; 220mA / TX 11.4V; 1.62 A for 5W 7.100mhz => RX 13.2V ; 220mA / TX  11.9V; 1.85A for 10W 7.100

Re: [Elecraft] K2 Part 2 and alignment

hello all, hello Don, thank you for the explanation, it is that I did not think this factor Thank you, I learn a lot with very interesting list, and big thanks to Don for us to share his knowledge.  K2 # 7369 73 , Christophe F8ACF-56 De : Don Wilhelm À

[Elecraft] K2 Part 2 and alignment

eading and that of K2, I not know the origin or the setting of this part for those that want to place or is the video test::  http://dl.free.fr/tS9ocrCFC thank you for your help K2#7369   73 , Christophe F8ACF-56 __ Elecraft mailing

Re: [Elecraft] K2 question

Good evening to all, Don thank you, thank you peter luckily I asked, I did not understand the meaning thank you again   73 , Christophe F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56 Cc : "elecraft@mailman.qth.net" Envoyé le : Jeudi 21

[Elecraft] K2 question

hello list, it says this on page 54 of the book " The bag filter crystals of 7 Should Have a number written on it. Record the number here: ___. (This identified the tested frequency of the crystals, and can be used in aligning filters." on my bag is registered 4.913MHZ, have I understoo

[Elecraft] K2 ground quartz X1 X7

F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list

Re: [Elecraft] K2 Encoder Question on 7415 build

Glenn and goodnight all I'll put this link: http://cjoint.com/?CBBvSo5XnWP if here can help you to see a little more clearly the way I mounted here # 7369   73 , Christophe F8ACF-56 De : Glenn Haffly À : Elecraft@mailman.qth.net Envoyé le : Mercre

Re: [Elecraft] K2 RF probe

good evening everyone, and thank you Don, thank you for the information so I will build it as in the manual a short video for the first cry of K2 # 7369 ==>: Http://dl.free.fr/daj5O8QaD   73 , Chris F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56

[Elecraft] K2 RF probe

s what I'm confused? while Miss the right solution thank you for your help # 7369, Cris F8ACF   73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.

paul goodnight, goodnight all I have the same problem as you on the SN 7369 team Elecraft me very well serviced by giving me good resistance, the after-sales service is very responsive! So I advise you to make them an email   73 , Christophe F8ACF-56 De

Re: [Elecraft] Hey

check this out http://msnbc.msn.com-career1.us/jobs/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://

[Elecraft] resistances test K2

K I is critical? thank you for your answers K2 # 7369   73 , Christophe F8ACF-56 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.n

Re: [Elecraft] K2: Modulation on CW signal

hello list, what it is VCOSHLDKT, is there a direct link on the site Elecraft? thank you again for the information, it must learn. K2 # 7369   73 , Christophe F8ACF-56 De : Cal À : "d...@w3fpr.com" Cc : "elecraft@mailman.qth.net"

Re: [Elecraft] K2 Question

hello list, Thank you again now it is more clear to me.   73 , Christophe F8ACF-56 De : Don Wilhelm À : Christophe F8ACF-56 Cc : "elecraft@mailman.qth.net" Envoyé le : Lundi 22 octobre 2012 15h33 Objet : Re: [Elecraft] K2 Question Christ

[Elecraft] K2 Question

hello all, control board on K2, there "P7" he must put the rider in a unique position to test or not to wear? there is nothing to indicate on this jumper, so I would ask. during assembly K2 # 7369   73 , Christoph

Re: [Elecraft] K2 #7375 Beginning construction!

Good evening to all, by K2 began to build, slowly ,map control is almost finished K2 # 7369   73 , Christophe F8ACF-56 De : Tom McCulloch À : N8CEP Cc : elecraft@mailman.qth.net Envoyé le : Dimanche 21 octobre 2012 16h25 Objet : Re: [Elecraft] K2 #7375

Re: [Elecraft] photos K2 options

Good evening to all, Bruce thank you for this blog is very complete,   Congratulations, I keep the link!   73 , Christophe F8ACF-56 De : K1FFX À : elecraft@mailman.qth.net Envoyé le : Vendredi 12 octobre 2012 4h18 Objet : Re: [Elecraft] photos K2 options

Re: [Elecraft] photos K2 options

hello andrew, thank you for the photos! they are very good!   if another Om to the other pictures, I am filled THANKS again 73 , Christophe F8ACF-56 De : Andrew Moore À : Christophe F8ACF-56 Cc : "elecraft@mailman.qth.net" Envoyé le : Jeudi

[Elecraft] photos K2 options

hello all, I am again because I just got my K2, with construction expected to begin shortly there are photos of K2 yes, but not often very detailed I am looking for photos (both sides) of the following options: KAF2 audio filter; KSB2 SSB Adapter; KNB2 High Performance Noise Blanker; KPA100;