m
(I have nothing to do with them...they just often have what I need.) :)
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Nov 4 12:18 , "Phil & Debbie Salas" sent:
>"...My local store have this Y adapter, I don´t know if it´s exactly a
>DB
urn it off with a CAT command in the appropriate logger
macro in the same way you CLEAR RIT. Then just turn it on as needed.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Nov 4 8:07 , "Jim Cox" sent:
>I agree Wes, way too much ringing for my taste.
fine.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Oct 21 6:34 , "Jim McDonald" sent:
>I uploaded my DXLab Commander user-defined controls and sliders (just AF and
>RF gain so far) for the K3 to the DXLab Yahoo Files folder:
>http://groups.yahoo.com/g
display.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Oct 21 6:29 , pastor...@verizon.net sent:
>
>Been trying to decode PSK 31 the past 2 nights with no success. I received my
>K3
2 days ago and I've set the mode to Data plus pushed the decode
Sold to N3ND. Thanks for the emails. :)
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Oct 18 14:52 , Greg - AB7R sent:
>I have two of these for protecting the input of an SDR from two radios. I now
>only need one. They're less than 9 mos old, min
I have two of these for protecting the input of an SDR from two radios. I now
only need one. They're less than 9 mos old, mint condx and bought new by me.
They
sell for $88.95 new. Selling this one for $65 shipped CONUS.
-
73,
Greg - AB7R
Whidbey Island WA
N
And for those who like to melt solder, this is a great project too:
http://home.comcast.net/~kk1l/kk1l_2x6switch/
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Oct 7 15:51 , "Dave Hachadorian" sent:
>Here's a great inexpensive b
set in MMTTY. For example, if the K3 is set to 2125-170
you
want to make sure MMTTY is set for 2125 Hz.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Sep 22 15:33 , W8JH sent:
>
>Any suggestions on an easy to use RTTY program for the K3? Very casual use
>
bit.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Aug 12 12:04 , Dennis KB7ST sent:
>
>Ron,
>
>I share the same challenges with PSK and RTTY decoding. My baseline is to
>operate my K3 while RV camping and to explore as much as I can without using
That was quick. One is spoken for...on still available.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Aug 12 10:11 , Greg - AB7R sent:
>I have TWO TopTen Devices Yaesu/K3 band decoders WITH the decoder to K3
>interconnect cables in excellent condition fo
cable). New this would cost $180.
Please contact by email or phone at (360)320-3436.
Thanks.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
NA-065 will surely have its share of operators. :)
Me too! But will only get to operate part time this weekend.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jul 22 14:24 , "Dick Dievendorff" sent:
>K6KR will be using a K3 (and generator pow
one with reduced sensativity to alloy you to hear
those
who are calling a bit off freq but not so much as to hinder someone you are
working
on frequency.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Jul 14 8:30 , "John King" sent:
>As another data
Always glad to help. :)
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Jul 2 13:01 , "Jim McDonald" sent:
>That was it, Greg!
>
>I am dumb as a box of rocks. I had forgotten to change the pitch in the
>radio to 1275 to match MMTTY. I
Jim,
In FSK-D you need to make sure the PITCH setting on the K3 and the tones setup
in
the software match. So if you have the K3 set to 2125-170 the software MUST be
set
to 2125. If not you won't decode anything.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
O
on.
Hope this helps.
-----
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jul 1 20:55 , Jim Hoge sent:
>I am need of guidance on all things voice. I have used my K3 (#1816) for some
>time
now but only on cw. With the 6m openings, I decided to put a mic on the radio
and
the K3 freq changes, but not the
mode.
You can also send the spots to other loggers like N1MM. There's also operation
with Skimmer though I have not tried it yet. Oh...it's free too!
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jul 1 9:42 , &quo
Could you have selected ANT2 or the RX ANT on 20M? The K3 remembers these by
band
so it could be set wrong on 20M and correct on the other bands.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Sun Jun 27 13:30 , "JIM DAVIS" sent:
>Gentlemen,
>
>A
the mic's PTT then you will
need
those to lines to an RCA plug for the back of the K3 too.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jun 17 13:55 , Robert Mitilieri sent:
>Has anyone used a Heil Goldline mic with a K3? I would like to use the Heil
>wi
If this is a semi-auto bug it needs to be connected to the Key jack just to the
right of the paddle input, not the paddle input. Just move it to the
appropriate
connection and you should be good to go.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon May 17 14:41
soundcard
output and the Line-In gain on the K3 adjust your settings to get 4-5 bars of
ALC
and you should be set.
Hope this helps.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Mar 24 11:49 , "Kurt Wiksten" sent:
>Hi
>
>I am using Logger32 and N1
But you can do it directly to the K3 too.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Feb 22 23:01 , "-.-. --.-N3TU -.-. --.-" sent:
>
>Can you make the FM sound sweet? The FM sounds like you're listening to an
>HT. It doesn't sound
use DXL for my everyday logging
except for contests, that's when I use N1MM and then I import those records
into
DXL.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Feb 10 6:45 , KM4VX sent:
>
>I see many people have the same problem with K3EZ; the pr
Julius,
These protectors are absolutely worth it and are a perfect compliment to Rose's
cases. I
saw Eric's at SeaPac last year and new immediately that I wanted them.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jan 21 7:14 , "Ed Muns"
s and then dig out what I can find. Don't send me anything till I
confirm with each
person.
---------
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Jan 5 10:02 , Keith Hamilton sent:
>Sounds good to me! What is the supplier and part number so I can order!
use.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Jan 5 9:53 , "Jim Brown" sent:
>On Mon, 04 Jan 2010 13:20:07 -0600, Tom Hammond wrote:
>
>>Since the posting of the link to my K3 Speaker Splitter PC board,
>I
>>have received a number of
You can order the DSP swap from the K3 ordering page.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 17 14:43 , Ben Horton sent:
>I, too, would like to know the answer to these questions
>
>N1LQ wrote:
>
>I too am wondering if the newer Re
One of my K3s is #3459 and it has the updated DSP board. I think it was right
around there when they started.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Dec 16 14:36 , Mike sent:
>Any idea what serial number the upgrade started shipping with? Or a way
Can you give more information on your setup and what the problem is?
I'm using N1MM and two K3s connected to a top ten DX Doubler and the Hamgadgets
MK1
keyer. Works great.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 10:58 , Bill Maddock sent:
Lee. I use that setup for all my contestingworks great! You can give me a
call if
you have any problems with setting it up...but it is pretty straight forward.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 7:40 , Lee Buller sent:
>
>OK, I am
One side noteI HAVE used the K3 Utility through LPB for the sole purpose of
executing macros. Though as Bill said you should NEVER try to do a FW update
through LPB.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 7:14 , Bill W4ZV sent:
>
>
&
Exactly...and it works GREAT for this exact purpose.
Other than the K3 Utility which is a necessity, I think LPB is the single most
useful
piece of software out there that supports the K3.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 6:59 , Barry N1EU
retaining nuts are not snug you
may not
have good contact.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Dec 1 15:46 , "Steve Ellington" sent:
>I'll get the ohmmeter after it tomorrow and find out if the vfo shaft is
>actually grounded. Seri
I email'd him when he first posted to check for good bare metal contact with
the inside
tooth washer on the encoder shaft behind the FP. Never heard back.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Dec 1 15:00 , "Eric Swartz - WA6HHQ, Elecraft"
Thanks for the explanation Lyle...that's exactly right. Though I hesitated to
use
the term, it actually acts like an APF for CW...at least with my settings it
does.
Pitch is set at 550 Hz and using DSP 5-2 and the context filter on.
-
73,
Greg - AB7R
Whidbey I
Try K31; SWH58;
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Nov 25 8:17 , "Randy Thompson K5ZD" sent:
>What is the macro command to do the same function as pressing and holding
>the NORM button?
>
>I want to be able to mess with the v
same macro saved to annother key and replace
LK$1 with
LK$0. This should equalize the VFOs and UNlock VFO B.
Wayne,
If that macro works it may be a good one to include in the next programming
reference
update.
---------
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Nov 24
results of the current setup, but there
have been a
couple reports so I suspect the problem is real and should be corrected.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Nov 24 9:58 , Lyle Johnson sent:
>> -- how can we change from LSB to USB when it
Please keep in mind if you are going to use a MAC you should probably get the
KeySpan USB>Serial interface. When I had an iMac I used the Keyspan 49WG and
never
had any problems. For my PC I installed one of the PCI serial cards and it
works
great.
-
73,
Greg - A
Hi Phil. I'm up on Whidbey Island in Oak Harbor.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Nov 17 21:24 , Phil Hystad sent:
>Is there a K3 nearby around Bellevue, Kirkland, Redmond, Washington. I would
>like
to come on over and listen to one and
probably use your macro again
which
will set it all up for you anyway.
To me it seems just exiting split would be easier and save a button for another
macro.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 27 9:19 , Chuck Guenther sent:
>Greg - AB7R wrote:
>>
Or just a HOLD of the SPLIT button to turn it off???
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 27 8:50 , Chuck Guenther sent:
>Dick, PA3CW, asked:
>"It would be nice to 'undo' the SPLIT+2 function by a second
>key press...is th
I use a 1.5 kHz filter when phone contesting. I set the FC to about 1.1 and
have not problems. I tell the K3 to kick in that filter at BW=1.7 kHz.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 20 14:58 , "Andrew Faber" sent:
>Dave's su
ences mentioned.
---------
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 13 14:27 , Fred Jensen sent:
>I'm having a hard time making sense out of all this and a couple of the
>questions involve non-Elecraft products, so I turn to the "Fountain of
>Elecraft and Elecraft
adjusting the TX EQ you
cannot set
the lower and upper limits. The ESSB funcion does let you select the TX BW up
to I
think 4 kHz (not in front of my radio right now).
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Oct 5 9:04 , Don Wilhelm sent:
>Ted,
>
&g
.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Oct 1 11:55 , "Julian, G4ILO" sent:
>
>
>
>Mike-39 wrote:
>>
>>
>>
>> Hi Julian -
>>
>> Direct keying = FSK
>> Audio keying = ASFK
>>
>> See h
Hi Matt. I used the DVR controlled by N1MM in the last NAQP phone contest and
it
worked and sounded fine.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Sep 25 11:04 , Matt Zilmer sent:
>K3 #24 was upgraded to include the DVR earlier this year. It worked
&g
At times, depending on the signal, you may need to adjust the threshold setting
in text
decode so that the tuning indicator is flashing in tune with the CW being
received. This
impacts autospot as well as text decode.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On
Ron,
Wes is looking for a component list for the boards. I showed him that the
schematic shows the valued
of the individual components but he is looking for a list of them. Is there
such a thing?
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Sep 8 15:08
!
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Aug 27 10:51 , Ken Roberson sent:
>Hello All,
>
>I built S/N 1354 from a kit , with FW 3.25 , I have
>installed most of the mods.
>I operate digi modes some of the time and I need to
>set the shift to 1.25 ins
then
attach
the audio plugs and the RCA for PTT and you should be all set.
Hope this helps.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Aug 24 15:02 , "Michael M. Raskin" sent:
>Anyone using this combo with the ACC (15-pin) instead of the mic jack? DX
out in the field and/or
no
computer is available, use PSK-D with your paddles.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Aug 10 7:12 , "Bud Governale, W3LL" sent:
>I made a few PSK31 QSO's today sending in DATA-A mode.
>
>However, I like
Google is great!
http://www.apogeekits.com/anti-static_products.htm
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Jul 31 11:43 , travistowns...@sbcglobal.net sent:
>i think i may have just drank the kool- aid. i placed my order for a k3. dale
>is a
most h
On the same panel. The circuit breaker reset is a bit higher and the 2M BNC is
below the reset button.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jul 23 14:08 , Paul - WW2PT sent:
>
>Wayne,
>
>I saw the K144XV at HamCom in Plano last month and it
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
. I keep the Main antenna set to auto switch
with
the KRC2 and the ANT2 position I manually switch to I can try different
combinations.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Jun 19 8:04 , 'Ken Kopp' sent:
>I purchased the KRX3 to monitor
ctors.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Jun 17 7:24 , Julius Fazekas n2wn sent:
>
>I picked up a microham USB Interface II this past weekend. It has a cable for
>a FT1000. I would assume all that needs to be done to make this work with a
>
you installed the KRX3.
The K3 remembers these selections by band.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Jun 3 11:07 , "ON4WIX" sent:
>Hi group,
>
>Running K3 S/N 0192 here. Installed my KRX3 last autumn and up until now all
>has been w
If someone is looking for something with a bracket, the fan option for the TT
Orion
actually fits very nicely onto the K2/100 heatsink. I used it often especially
when running RTTY.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed May 27 13:05 , "Ron D"
Sorry...SWT21; is message 1, SWT31; is message 2, SWT35; is message 3 and
SWT39; is message 4. If you
use SWH instead of SWT it will cause the message to repeat based on the
interval you have set in the K3
menu.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri May
infront of my computer and radio) it would
be
something like: {CAT1ASC K31;SWT31;} to play message 1.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri May 22 2:55 , E72X sent:
>
>Hi,
>
>How does one connect N1MM Logger to the K3 so you can execute a
&
The draw back with this approach is window focus. If you are doing other
things
while SDR-IF is running won't you have to first click to get the focus back for
the
Griffin knob to work?
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri May 8 13:40 , Pa
PSK-D is ONLY for direct paddle input to translate CW to PSK or using a
terminal program
connected to the RS232 port...such as the terminal tab on the K3 utility. If
you are using a
digital mode program as you are, you must use Data-A, not PSK-D.
-
73,
Greg - AB7R
Ooops...sorry. That was supposed to be $375.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Apr 27 11:03 , Greg - AB7R sent:
>Thought I would post this here before putting it on the swap sites.
>
>I have an excellent condition Microkeyer II with a K3R
rator well grounded?
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Apr 27 13:57 , Stephen Prior sent:
>I agree, I have used my K3 for almost a year now and I don't recall one
>situation where the NR was more effective than the filtering between my
>ears
.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
This is correct. The prosign is only used in conjunction with FSK-D and PSK-D
programed memories to truncate the 4-sec trailing delay. It has no effect on
playback of CW memories.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Apr 20 8:28 , Bill W4ZV sent
PSK-D does NOT work with the FSK pins on the ACCY connector. PSK-D works with
paddle
input and ascii input from a terminal, such as the terminal tab of the K3
Utility
program.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Apr 14 11:58 , Iain MacDonnell - N6ML
See below
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Apr 13 5:58 , "Igor Sokolov" sent:
>I finally got enough courage to upgrade to ver 3.06 and try "true
>independence" with KRX3. Here are some questions that I hope someone ca
I suspect he wants two ops at the radio...one as a spotter listening ONLY to
the sub and the actual operator using
the main or main and sub.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Apr 10 13:36 , "Dick Grolleman" sent:
>Well if you one to run
---
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Apr 10 11:31 , Ruben Navarro Huedo sent:
>Hello friends:
>Today we have been testing the K3 (with sub installed) for our S04R
>expedition.
>We want listen Subreceiver (and only sub) in both ears, not only the right.
>Is th
u can connect the RX antenna as I said
to the
PR6 input and use a T adapter on the output of the PR6 to the Aux RF input and
the KXV3
RX IN connection.
-----
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Apr 2 7:57 , 'Andy GD0TEP' sent:
>Greg, what I was tr
,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Apr 2 7:39 , "Andy GD0TEP" sent:
>OK Bud, that answers that question then... thanks.
>
>73 Andy
>http://www.gd0tep.com
>
>
>-Original Message-
>From: Bud Semon N7CW [n...@cableone.net','',
found
the Keyspan 4-port device to work great without ANY issues on both platforms.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Mar 31 6:50 , Lee Buller sent:
>
>When I purchased by K3, I also got the KUSB kit as well. Worked great for
>quite
awhile
COM port to pins 1 and 5 on the
ACCY
connector.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Mar 23 13:16 , Brian Machesney sent:
>Don,
>
>I am a "digital mode neophyte." Is it possible - or, is it considered to be
>too much of a kludge - to
I use the Heil quiet phones plus headset and have never had any RFI issues
running
a KW. And they are amazing at blocking noise. I had an AL1500 that was surely
on
the "loud" side but when I put these quiet phones on you hardly notice it's
there.
---------
Noone is saying its not worth discussion. I simply stated its a problem with
the software, not
the radio. I wish there was a work around as I like the program. Though it
will soon be moot
here as I continue to migrate to Mac.
-
73,
Greg - AB7R
Whidbey Island WA
NA
using MM with a Parallels
interface on a 3.0G iMac.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Mar 17 12:07 , "Andrew Faber" sent:
>Greg,
> I noticed the same problem sending CW to the K3 using my own software,
>CQPWIN, and a Winkeyer when us
e gave up on it. That's a shame as
Logic
is otherwise a great logging program.
-----
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Mar 17 11:57 , "Gary Smith" sent:
>Hi,
>
>When I use Logic 8 there is a nice feature where there is a DX Spot
&
gets lots of complaints and certainly not
enough
accolades when it comes to working on N1MM code.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Mar 17 11:36 , "Jim Brown" sent:
>On Tue, 17 Mar 2009 09:55:22 -0400, Greg - AB7R wrote:
>
>>Hi Jim.
Hi Jim. I've notice something like timing problems or part of the first
character being
chopped when CW AND PTT are set at the same time. If I only set either DTR or
RTS to key CW
and no PTT action it keys perfectly.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
That's on the K3 software page of the Elecraft Website.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Mar 16 8:22 , Joe Planisky sent:
>I don't know of a mailing list, but it would be nice to have an
>Elecraft-announce list just for letting peopl
BTW...if you are going to use you computer for PSK...you need to have the K3
data
mode set to DATA-A and make sure your MIC SEL menu is set for Line-In.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Mar 13 6:09 , Jay sent:
>About to order the KRX3 and upgra
computer.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Mar 13 6:09 , Jay sent:
>About to order the KRX3 and upgrades for my #1288 and would like to work
>psk31 off my computer screen Do I need to order anything else or
>specific software to make th
computer.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Mar 13 6:09 , Jay sent:
>About to order the KRX3 and upgrades for my #1288 and would like to work
>psk31 off my computer screen Do I need to order anything else or
>specific software to make th
Many contesters like to assert a manual PTT instead of having the radio do it
when sending CW.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Mar 2 11:55 , "Evert Bakker \(PA2KW\)" sent:
>Disabling TX-ing can be done by TX-TEST mode, so which speci
redoing the
connector with a new one.
Doing it this way was a bad move IMHO. I may just replace them connector with
RCAs and use my LDG
breakout box.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Feb 27 10:20 , "W0MU Mike Fatchett" sent:
>I hav
Set the TX DLY menu item to a lower settingI found that anything below 10
worked OK.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Feb 25 15:41 , Robert Mccormack sent:
>At ZM1A (multi-two) during the ARRL DX CW contest we received some reports
of &quo
This keyboard works GREAT for such things..and has additional keys you can
program.
www.bella-usa.com
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Feb 23 8:38 , "Julian, G4ILO" sent:
>
>
>
>Brian Machesney wrote:
>>
>> T
/detail.aspx?ID=2134
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
requirement of the amp's relay.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Feb 12 7:13 , "Barry, Stephen" sent:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>Iâm a long time builder/operator
on QRZ.com.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Feb 11 13:09 , Jeff Wandling W7BRS sent:
>
>Fun stuff -
>
>I'm not quite looking for the KPA1000, but this is where I'd ultimately
>like to go design and homebrew-wise if I could try, someday.. maybe.
>
>
This has been on the list for some time. However the VFO IND function has been
at
the top and has Wayne's full attention.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Feb 11 11:46 , Dan Atchison sent:
>I do hope that Elecraft has high on its list of f
Jim,
Did you perform the TXG calibration process on all bands at exactly 5 and 50
watts? What are you doing when
taking the readings -- using the TUNE buttone (not ANT TUNE)?
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Feb 5 16:07 , "Roger Stein&q
Menu
Option
(I think thats what its called but not sure) and when you run it you get a
print
out all the K3 parameters and settings. Neat tool.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Feb 2 7:18 , "Roy Morris" sent:
>
>
>
>
>
>
When the SUB is turned on the Line Out audio is Main=left and Sub=Right.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Fri Jan 30 11:12 , Iain MacDonnell - N6ML sent:
>
>
>Leigh L. Klotz, Jr WA5ZNU wrote:
>> Is it possible to control whether the sub rx g
LP Pan and WinRad are using the K3's IF, not the audio output from the K3.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Jan 29 11:02 , Barry N1EU sent:
>
>
>
>Joe Subich, W4TV-4 wrote:
>>
>>
>>
>>> Unfortunately
The tuning aid CWT works in CW, PSK and FSK only. The auto spot feature works
in
CW and PSK.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Jan 27 10:55 , Ken Roberson sent:
>Hello All ,
>
>After downloading the new FW 2.80 I attempted
>to use th
1 - 100 of 250 matches
Mail list logo