Re: [Elecraft] Elecraft Calendar?

There should be topless models, of course. The radios, I mean, so we can see the electronics. :) (Bet this doesn't get past the spam filter.) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 04/12/2007, [EMAIL

Re: [Elecraft] K3 problem with logging program after download upgrade

uch else, unfortunately... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (

Re: [Elecraft] K3 problem with logging program after download upgrade

every line should start > with a colon. > Surely the uploader should do some kind of integrity check, instead of attempting to upload a duff file to the radio? It's not exactly rocket science. There's a thing called MD5 that's very good for this... -- Julian, G4ILO K2 s/n: 392

Re: [Elecraft] K3 PSK issue - How to?

of between 3 and 5 Watts. With PSK31, that's > enough. > I'm a bit puzzled by this, especially the selection of mic source. Do you have to go through all this whenever you change from SSB to data mode? Doesn't the K3 have independent settings for data mode so o

Re: [Elecraft] LOW RESALE VALUE OF LOW SERIAL NUMBERS

My reply to NN4X's posting was bounced by qth.net as spam. Anyone who wants to read it can see it here http://www.zerobeat.net/smf/index.php/topic,104.0.html . -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobe

Re: [Elecraft] Firmware updates for EU bands

its be user programmable, a function of the firmware utility? Then when you are off to Thailand you can just program in their limits, and when you come back you can remove them again. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com

Re: [Elecraft] OT - American hamming in UK

s it makes. Which is similar to my situation here, with my attic antenna farm. Someone whose antenna is on a 50 foot mast 50 feet away may never notice a thing. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf _

Re: [Elecraft] OT - American hamming in UK

just now he seems to have stopped. I haven't stayed there myself, though I did have an exchange of emails a few years ago when I thought about going up there, and I think he would allow use of his shack. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zero

Re: [Elecraft] OT - American hamming in UK

to me to have an advantage in ease of deployment at temporary locations than the regular centre fed sort. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Po

Re: [Elecraft] K2 SSB adjustment

the same settings as LSB on the lower bands, and vice versa. So 10m USB should sound the same as 80m LSB. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Po

Re: [Elecraft] K3 Curious behavio

es, just as the original one in the K2 did. This doesn't seem to me like a good use of a presumably limited resource. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ E

Re: [Elecraft] Thoughts on additional K3 feature

u could communicate with the K3 via a Bluetooth serial adapter and have a pocket sized Morse and PSK terminal... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecra

Re: [Elecraft] Thoughts on additional K3 feature

of software such as Digipan etc. > I've already got MixW for that. The ham community probably doesn't need yet another sound card digimode program. But one that can do digimodes without a sound card would be unique to Elecraft, I think. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4IL

Re: [Elecraft] Thoughts on additional K3 feature

ing that - but it seemed to me that would be pretty difficult. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You

Re: [Elecraft] Thoughts on additional K3 feature

es it thinks. Especially anyone who tries it with a K3, which is supposed to use the same K2 commands. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to:

Re: [Elecraft] K3 Mic Menu,TX Equalizer & Low Power Software Request

e loop. If the KAT3 could be configured separately for the two antenna sockets, that would be a big plus for me. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Po

Re: [Elecraft] 5 pole/8 pole price delta

off ordering the 8 pole as an extra and keeping the 5-pole for use in a home-brew project or to sell to some home-brewer. It's got to be worth more than the credit you're getting for it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO&#

Re: [Elecraft] Online Orders: both international USPS options were not valid

t; 73, > Chris DL/Kf6vci >From what I understand from discussions that may have been off-list, USPS options are not allowed for international K3 orders because the maximum insured value is not great enough. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com

Re: [Elecraft] K3 Deposit Clarification - just curious

job doesn't depend on it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list.

Re: [Elecraft] Re: UK VAT!

On Nov 27, 2007 5:24 PM, Mitch DJØQN <[EMAIL PROTECTED]> wrote: > You UK guys are spoiled Our VAT went up to 19% this year Yeah, well someone has to pay for all those bureaucrats who enforce CE regulations! ;) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack:

Re: [Elecraft] Re: [Elecraft_K3] K3 Shipping Status Update 11/26/07

ood bet !) I never bet, because I always lose, as I did in this case. The exchange rate is much more favourable now than it was back in May (and let's not even think about 6 months interest on $1000.) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat

Re: [Elecraft] Re: [Elecraft_K3] K3 Shipping Status Update 11/26/07

ny did pay. I'm a little put out by the revelation that rigs ordered with deposits are not getting priority, especially as it looks now as if I'll have to ask for shipping to be delayed until after Christmas to be sure of being here when it is delivered. -- Julian, G4ILO K2 s/n: 392

[Elecraft] Re: OT: US call areas

On Nov 26, 2007 3:29 PM, Julian G4ILO <[EMAIL PROTECTED]> wrote: > This is probably common knowledge to most, but do US calls not relate > to the geographic area any more? Thanks for all the answers, already! -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo

[Elecraft] OT: US call areas

have *any* use (e.g. for multipliers in ARRL contest scores)? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

Re: [Elecraft] CQWW Stateside QRM

my station but I just love CQ WW CW! Just need to put in a few extra hours tomorrow to do the 12 hours minimum required to submit a log. Yes there are a few clicky stations (not all from your side, either.) I had my K2 narrowed down as far as it would go and wishing I had my K3... -- Jul

Re: [Elecraft] K3 status

obably caused a deluge of emails - including one from me, which hasn't been replied to either. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to

Re: [Elecraft] K3 - Noise reduction gone in v1.42 firmware update?

On Nov 23, 2007 4:04 PM, Dave G4AON <[EMAIL PROTECTED]> wrote: > I've just gone back to 1.41 got noise reduction back... It's not called the bleeding edge for nothing, Dave. :) (OK, I'm just jealous because you've got yours and I haven't...) -- Julian, G4IL

Re: [Elecraft] ESD recommendation

ut on an anti-static mat and wrist strap. I've never used one in the past. But I figured that if I zap something on a K3 board, which is not user repairable (at least, not by me) it would be a much bigger deal than if I zapped a discrete component when building my K2. -- Julian, G4ILO K2 s/n:

Re: [Elecraft] 100 K3's shipped

n I ordered mine (with 50% deposit) but the order acknowledgement was received on 5th May and I seem to remember waiting a day or two for the acknowledgement. Nothing heard here either. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ha

Re: [Elecraft] K3: prod run #1 size

ng offered in the other hand that must really get them wondering! -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You mus

Re: [Elecraft] K3: prod run #1 size

er at the time as I imagined that every ham on the planet would want a K3 once they found out about it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: El

Re: [Elecraft] K3: am I missing something re: DMM

ars ago, since all I had was a Russian-made analog VOM about 25 years old. All the measurements on the K2 checked out right where they were supposed to. I prefer to spend money on things that are going to be used. My advice would be, get the cheapie. -- Julian, G4ILO K2 s/n: 392 K3 s/n:

Re: [Elecraft] Latest updater reported as Spyware!

the subject: http://www.tech-pro.net/howto-buy-antispyware.html . -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] OT: Logging software

es anyone have any suggestions? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscr

Re: [Elecraft] Latest updater reported as Spyware!

en different scanners to give you a consensus of opinion as to whether it's harmful. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraf

Re: [Elecraft] soldering suggestions?

r bit. But see what others advise. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On Nov 20, 2007 9:07 AM, rellis <[EMAIL PROTECTED]> wrote: > > Hi, > > Having purchased a K1 kit, but never having soldered be

Re: [Elecraft] Serial Bus Adapter

. I have a MixW RigExpert and there are no drivers available for that, except for Windows. It's easy to interface RS-232 to all kinds of things whereas if the K3 had a USB port on the back, we'd be pretty well stuck with whatever Elecraft chose to provide. -- Julian, G4ILO K2 s/n: 3

Re: Fw: [Elecraft] DeoxIt and/or ProGold useage

t If it was essential, I am sure Elecraft would include it in the kit. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.ne

Re: [Elecraft] K3 Construction Photos (Link)

a week or so ago? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber I

Re: [Elecraft] K3 operating tip: AFX (audio effects)

How about uploading some stereo MP3s we can download and listen to? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You mu

Re: [Elecraft] (no subject)

is intended ultimately to support, so it's a moving target at the moment. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.

Re: [Elecraft] Important K3 News - alternative to internet connection?

you can update the firmware from files that have been manually downloaded to a USB memory stick or similar. It's no problem at all, as long as you can connect the K3 to a PC that runs Windows. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Foru

Re: [Elecraft] Important K3 News

re, which has never caused an issue until a few days ago when working on my new program when I wasted half an hour trying to figure why the TQ command didn't work. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf _

Re: [Elecraft] K3: 2nd RX or 2nd K3? [OT]

e falling over all the time. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Su

Re: [Elecraft] CE labels, band limits - no thanks!

On Nov 17, 2007 12:06 PM, Ian White GM3SEK <[EMAIL PROTECTED]> wrote: > > Kristinn has it exactly right. The only thing that matters is what the > regulations actually SAY, so she quotes them word-for-word with no Kristinn looks like a bloke to me... ( http://www.simnet.is/net/tf3k

Re: [Elecraft] CE labels, band limits - no thanks!

elief that the potentially malicious users of this equipment don't know this too. And other radios can presumably have their band limits changed or removed with equal ease. So exactly what, in practise, do these restrictions achieve? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4I

Re: [Elecraft] K3: doing the math

On Nov 16, 2007 9:38 PM, <[EMAIL PROTECTED]> wrote: > As long as I get my K3 sometime before the sunspots get back, I'll be happy... I sincerely hope I don't have to wait *that* long! :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham

Re: [Elecraft] computer headset for K2/K3 SSB

X I can see is working in contests, and I can think of few things more mind-numbingly tedious than shouting my call over and over again into the bedlam that is an SSB contest. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf __

Re: [Elecraft] K3: SN56 qrv, but.....

then listed at http://www.zerobeat.net/mediawiki/index.php/K3_Serial_Numbers but I guess a lot of those who ordered early were not reflector subscribers. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf __

Re: [Elecraft] computer headset for K2/K3 SSB

OX, though I'm not a big fan of phone either. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to

Re: [Elecraft] K3 CE - needs "e" marking too for mobile use

ly my built-from-a-kit K2 or 3, but if you buy it ready made it needs to be marked. Heck, would our lives really be worse if we didn't have people whose jobs it is to come up with this stuff? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobe

Re: [Elecraft] K3 CE - needs "e" marking too for mobile use

s fitted to the vehicle, not perched on the seat and operated while the vehicle is parked? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@

Re: Re: [Elecraft] K3 CE

y driving by young people in the town centre at weekends. The thought of them bothering to check if a radio has a CE sticker is simply unimaginable. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf _

Re: Re: [Elecraft] K3 CE

were in the 80s when they had to be type approved by the monopoly telecoms provider. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On Nov 15, 2007 10:16 AM, Stewart Baker <[EMAIL PROTECTED]> wrote: > In the past

Re: Re: [Elecraft] K3 CE

rking busines seems to me to be a total waste of time, as it is either unenforced or unenforceable. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Ele

Re: [Elecraft] KCommunicate - new software for K2 and K3

Plus the older programs were written in Delphi which I no longer have. By using Lazarus I have the option to make Linux versions if I want to move to that - always assuming I can't persuade a current Linux user to do it beforehand. :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO&#x

[Elecraft] KCommunicate - new software for K2 and K3

nterest in doing so. Please use the forum if you have any questions or comments about the program. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Po

Re: Re: [Elecraft] K3 CE

rtified at this end then it obviously isn't illegal to import uncertified goods therefore customs isn't going to be bothered. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___

Re: [Elecraft] K3 wish list

neighbours must have thin walls, or very sensitive ears, and you must live in a very quiet location. :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing li

Re: [Elecraft] K3 CE

CE certified - I think someone on this reflector confirmed it) and then "certify" it themselves, I don't see why lack of certification should be an obstacle to anyone in the UK receiving the K3 they ordered, even a built one. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO'

Re: [Elecraft] K3 wish list

product was available that offered these features with the same operating convenience you get with an internal ATU then I'd join those who have already said they'd buy it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/sm

Re: [Elecraft] K3 Shipping options to UK

ly be buying transverters > as well. > The packing is one thing, but at this end using the cheaper option the package will be handled by an outfit named Parcel Force, more usually referred to as Parcel Farce for its laughable incompetence. I think the extra cost would be a wise investment. --

Re: [Elecraft] [OT] K3 Serial Number 000037 is in Switzerland

in the back. > Mixed with copious amounts of snow. Yep, my XYL said it was a lovely house. Me, I couldn't take my eyes off that white box... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___

Re: [Elecraft] K3: mine is NOT on the way

should get yours before I get mine. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

Re: [Elecraft] Ham software

On Nov 9, 2007 6:55 PM, Ian Stirling <[EMAIL PROTECTED]> wrote: > On Friday 09 November 2007 13:33:56 Julian G4ILO wrote: > > > But that doesn't invalidate the > > principle that we should be more willing to pay for software. > > [snip] > > > I'

Re: [Elecraft] Ham software (was: [K2] Remote control programs)

On Nov 9, 2007 4:56 PM, Vic K2VCO <[EMAIL PROTECTED]> wrote: > Julian G4ILO wrote: > > First, I'm a professional programmer. > > I've paid good money for some ham (and other) software, and it has > turned out to be junk. Much ham software is written by hams who

Re: [Elecraft] [K2] Remote control programs

we can't afford to pay for software - even the most expensive program costs about the same as a fairly simple shack accessory. Sorry for the rant, but it's something I feel very strongly about. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO&#x

Re: [Elecraft] Re: K3 text-to-terminal details

receiver, so I won't need to worry about that. But it is certainly essential, for any software to make serious use of the internal decoder. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___

Re: [Elecraft] RE: K3 - My Story, Part II

s a copy > offline. You are more than welcome to post it in the K3 message board at www.zerobeat.net/smf. I am sure that everyone who has ordered or is thinking about ordering a K3 will be happy to read it. I know I'd like to. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Sh

Re: [Elecraft] Re: K3 text-to-terminal details

polls the S meter to get an updated on screen display of frequency, mode and signal strength. I don't see any way to use the TT1 output in software that is designed to process strings terminated with a semicolon that always begin with a valid K2/3 two character header. -- Julian

Re: [Elecraft] Re: K3 text-to-terminal details

e GPL so it ought to be fairly easy for anyone who knows the Pascal language to make versions that run on Linux or Mac OS, or add extra functionality that they feel is missing. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf _

Re: [Elecraft] A "My K3's coming question"

plies about the serial cable wiring but what about the audio connections? Would standard 3.5mm to 3.5mm stereo jack cables suffice? Is any resistive attenuator needed, such as I've used in the home made cables for most other radios? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO&#x

Re: [Elecraft] A "My K3's coming question"

cable it makes most sense for me to make up my own. It's also something to do while I'm waiting... I'd also like to make up audio interface cables. I can't tell what the connectors on the K3 are from the picture, and the manual didn't appear to mention it. -- Ju

Re: Re[2]: [Elecraft] OT: Motorola buys Yeasu. Wow!

trength is in manufacturing cheaply products that are designed elsewhere - something Wayne and Eric might want to think about if the K3 order book keeps growing faster than they can make them. :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.z

Re: [Elecraft] K3 CW set up

Since the xtal filters in the K3 are roofing filters I'm going with the stock 2.7kHz filter, and just adding wider filters for 10m FM and broadcast AM reception. I'm betting that the DSP will provide all the narrow filtering I'll need. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??

Re: [Elecraft] [OT] CW speed and decoders and SS

of the reasons behind my attempt to switch to Linux for the shack. Unfortunately after someone suggested I try FLDigi my sound card stopped working with either of the programs and I hadn't a clue how to fix it, so I went back to Windows. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack

Re: [Elecraft] [OT] CW speed and decoders and SS

ot listening to the next one. Whatever the character speed, 12 - 15wpm is the fastest my brain seems to manage to keep up with. Consequently my whole ham life I've been afraid to call CQ using CW in case someone comes back to me too fast for me to read. -- Julian, G4ILO K2 s/n: 392 K3 s/

Re: [Elecraft] K3 assembly pictures posted

So do I but, truth be told, I don't plan on spending that much time looking at them. :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 11/3/07, Mike Harris <[EMAIL PROTECTED]> wrote: > > Interesti

Re: [Elecraft] Re: A Curious (and Serious) Question

I was more interested in the statement that there was around 300 of them. I know inventorying in a good idea, but do you have to count the peanuts? :) -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 11/3/07, [EMAIL PROT

Re: [Elecraft] K2/100 and ACOM-1000

quot; the audio with the amp switched out, the first time you power on, to let the ALC set the correct level? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 11/2/07, ON4FG <[EMAIL PROTECTED]> wrote: > Hi, > >

[Elecraft] OT: New Morse code trainer for Windows

Any comments on this or other aspects of the program are welcome before I announce it more widely. Now back to your regular programming... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf

Re: [Elecraft] K3 Deliveries

when they might receive their order. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/31/07, Stewart Baker <[EMAIL PROTECTED]> wrote: > Seconded. > Many amateurs (including myself) who have placed orders for

Re: [Elecraft]US Postal Service Express Mail to the UK - update

rt up. Any advance on S/N #27 anyone? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the l

Re: [Elecraft] k3 on fire?

Just hope no Elecraft staff members are among those whose homes have been lost or are threatened by the fires. A quarter of a million people have been evacuated, according the BBC. That must have taken some doing. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zer

Re: [Elecraft] Why a K3?

You are welcome to join the forum at zerobeat.net/smf and have this discussion there. I'm sure it would make interesting reading for many others thinking over the same question. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.ne

Re: [Elecraft] No Sun Spot DX

acons... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/22/07, Ron Polityka <[EMAIL PROTECTED]> wrote: > Hi, > > This past weekend I played around in the WAG Contest, Worked All Germans. > > Just doing

Re: [Elecraft] KAT2: Can't Get Bridge Null Adjustment (C55) Below 012 mV

t, and 1:1 into 50 ohms. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/19/07, Michael Linden <[EMAIL PROTECTED]> wrote: > I'm performing the Bridge Null Adjustment (C55) on my KAT2, but can't &g

Re: [Elecraft] K2/K3 Scientific Attention to Detail

That's the EU in a nutshell. For another example, look at all the effort made to force Microsoft to release a version of Windows with no media player in it. Which nobody wants... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.ne

Re: [Elecraft] [OT] Software for Learning Morse Code

cheap Chinese MP3 player from eBay) and carry around for practise. It's also free. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/19/07, Corboy-Poteet <[EMAIL PROTECTED]> wrote: > A friend of mine

Re: [Elecraft] (K3) RSGB HF convention - Eric WA6HHQ

Any chance that this is available on YouTube or somewhere for those of us who weren't present? Those first K3 owners must be having an absolute ball, to keep them from posting reports to the reflector... -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat

Re: [Elecraft] Have we gone Off Track?

re are too many diverse interests in the membership now for every list posting to be of interest to all. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/16/07, Darwin, Keith <[EMAIL PROTECTED]> wrote: > > It is the K

Re: [Elecraft] WA3WSJ's Place : new website!

Looks great, Ed. You are welcome to add a listing for it in the Personal Home Pages section at www.ham-directory.com . That goes for anyone else who has a ham radio related homepage, too. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobea

Re: [Elecraft] K3 question

Yes, you can turn the power down, and the PA is switched out as you go below 10 watts, as I understand it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/15/07, rattray <[EMAIL PROTECTED]> wrote: > > If

Re: [Elecraft] K3: Front/Bottom accessory connector usage?

rent plug on the end. Since we're in "wish list" territory here, I could even speculate that it might have its own display with a larger tuning indicator and scrolling text readout than that available on the K3 front panel. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's

Re: [Elecraft] [K3] CW via serial cable question

t HRD will support it. Unfortunately I have never managed to get to grips with that program's user interface, and I'm not sure (as a non-serious contester) whether HRD counts as a "contest logger" anyway. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www

Re: [Elecraft] K3: Front/Bottom accessory connector usage?

keyboard that can be used, other than a standard PC keyboard will not be compatible. So my guess is that it will be a to-be-announced Elecraft accessory. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 10/15/07, Chuck Catledge &l

Re: [Elecraft] [K3] CW via serial cable question

il it is ready before you can send more, you can't use this method to send very long texts. On the other hand, perhaps they have added support in a recent update and I wasn't aware of it? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums:

Re: [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?

in frequency. Therefore I wonder if you should look elsewhere for the cause of the problem. Before investigating inside the K2, is your power supply immune to RF? Does the voltage change in the presence of RF? -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobea

Re: [Elecraft] [K3] Wine & Update Software

VMWare may be free, but XP isn't. And expecting non Windows users to jump through technical hoops and buy a Microsoft OS just to run a firmware loader does not seem to me to be reasonable. I wonder how many Mac or Linux users out there have not ordered a K3 yet because of this issue? -- J

Re: [Elecraft] [K3] Wine & Update Software

ft to do it all themselves. I'm glad I use Windows (and that isn't something I say very often! ) Mac and Linux users must be feeling a bit left out at this point. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf

<    4   5   6   7   8   9   10   11   12   >