Thanks for all the inquiries. The P3/SVGA has been sold.
Todd, WA7U
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
Hello List members,
I have for sale a factory built P3 High Performance Panadapter with factory
installed P3SVGA option, all in mint condition. The serial number is #3153 and
was purchased at the Visalia DX convention this year. I no longer have the
original packing box. It is excess to my n
I’m wondering if anyone else has had this problem? When I shut down the KPA500
from the front panel the cooling fan turns on and instead of shutting down it
continues to run until I turn the power off on the rear panel. When I turn the
back panel power switch on again the fan immediately come
Received Fred’s heat sink yesterday and installed it on the KX3 today.
Beautifully done and fits like a glove. It took about 10 minutes to install and
the powder coat finish matches the radio nicely, and all covers still fit
nicely. Thank for a great job Fred. Now I’ll try to do some thermal
Fred Cady, KE7X, is about to release his newest manual detailing the
operation of the KAT 500 and KPA 500. I've been involved in the review
process and I think it will answer a lot of questions that people have. It
should be out in the next couple of weeks and will be a great addition to
Fred
New Apple devices now use a connector called the "Lightning Connector"
instead of the old 30 pin connector. You need an adapter to go from the
lightning connector to the old style 30 pin connector. These are available
anywhere Apple devices are sold. The Griffin iMic works fine with the
adap
Hi Dan,
I had this occur and changing my span from 150 Khz to something less like
100 Khz made the refresh rate begin to function normally again. Not sure if
this will help you or not. I'm running the latest firmware.
73,
Todd, WA7U
-Original Message-
From: Dan Maase
Sent: Tuesda
The website should be www.ke7x.com
-Original Message-
From: Cady, Fred
Sent: Wednesday, November 14, 2012 9:12 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] [KX3] KXPD3 intermittent keying
My KXPD3 started to give some intermittent keying.
Here is my theory:
The connection be
I’m a bit confused about P3 firmware. I saw mentioned in past posts that a
beta P3 version 1.18 was available. When I direct the P3 utility to the
Elecraft “Mother ship” it says that P3 version 1.20 is available. Upon
downloading and installing 1.20 the P3 utility no longer sees my SVGA board
test
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Test
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
All of my experiences with Elecraft service have been superb. I always call
(not email) to explain my questions or needs and give them the option of
returning the call or sending me an email. I had a problem with the seating
of the roofing filter in my KX3 this morning and within 30 minutes I
Hi Monty,
We installed a PV system consisting of 18 240 watt panels in December of
2011. I'm using an inverter and feeding the grid and am currently about 200
KW/hrs ahead of usage. I experience no RF coming from the system and the RF
I generate (1 KW on HF) doesn't seem to bother the system.
f time, and I imagine he spent more time than that.
It was unsettling to not have conclusively determined the problem,
especially since it seemed to happen without warning, but it's been working
fine.
73, Jim N7US
-Original Message-
From: T Gahagan [mailto:wa7...@gmail.com]
My K3
My K3 produces no RF in transmit at the 10 watt or 100 watt levels. The
display shows two horizontal lines during transmit and shows 0.0 watts output.
I have loaded older (4.47) firmware and then reloaded newer (4.48). I have
done a re-initialization and reloaded all parameters. I removed th
For those that don’t know about the new K3 guide by KE7X check out the link in
this message. Fred has done an outstanding job of explaining many of the
intricacies of the K3 that have puzzled me. Block diagrams and step by step
instructions on just about every facet of operation are really hel
Just received and put KPA500 #24 on the air today. Wow! what a great product
and well worth the wait. I drooled over it at Visalia and it’s just great to
get to put one on the air. Thanks to all the people at Elecraft that made this
possible and produced such a great amplifier. It fits perfectly
I received an order confirmation for the KPA500 on April 6th and have not heard
anything since then. Just wondering if folks who ordered around that time have
received their amps or if anyone knows what the shipping status is?
Thanks,
Todd-WA7U
__
Thanks for posting that Fred. It is a great help for DVR operation,
Todd, WA7U
- Original Message -
From: "Cady, Fred"
To:
Sent: Thursday, March 31, 2011 10:00 AM
Subject: [Elecraft] DVR Audio
>I recently got a DVR and put together some of my thoughts on how it
> operates gleaned fro
Yes, I am not able to open it either. Adobe says the file is damaged and
can't be repaired.
Todd, WA7U
--
From: "David Pratt"
Sent: Tuesday, August 10, 2010 12:30 PM
To: "Elecraft Reflector"
Subject: [Elecraft] P3 Manual Rev A3
> I am getting a
Several have asked when I ordered, sorry, I should have included that
information. As I recall it was on the morning of the 15th or 16th of
April. Hope this helps.
73,
Todd, WA7U
--
From: "T Gahagan"
Sent: Friday, July 30, 2010
Just got notice that my P3 shipped today. I don't want to cause a "ruckus" but
I know some of you are on the edge of your seats about this.
73,
Todd, WA7U
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
Mine is also on the transmitted signal.
Todd, WA7U
--
From: "John Lemay"
Sent: Monday, May 03, 2010 5:55 AM
To: "'juergen'" ;
Subject: Re: [Elecraft] k3:TX Monitor-some odd sound -beta?
> John
>
> Yes, I get this artefact. It's been evident ever
I have noticed this on voice also. I thought at first it was my imagination
but it becomes apparent if I speak loudly. Backing the compression and mic
gain way off helped somewhat but it's still there.
Todd, WA7U
--
From: "juergen"
Sent: Monday
To my friends on the Elecraft reflector:
I usually sit quietly monitoring the Elecraft reflector traffic, ignoring
most of it, but ALWAYS reading any post by W3FPR. Don's posts have been
very helpful to me over the past 11 years and I know many others and I
would not have solved some difficul
Thanks very much! I haven't had that good a laugh in a very long time.
73, Todd
WA7U
--
From: "Al Lorona"
Sent: Tuesday, February 09, 2010 4:22 PM
To: "Elecraft Reflector"
Subject: [Elecraft] Man Hospitalized
>
_
Thanks for explaining this since my W2 is acting the same way. I will use
the W2 utility to change to AVG power.
Todd, WA7U
--
From: "David Fleming"
Sent: Sunday, December 13, 2009 2:58 PM
To: ; "worsr"
Subject: Re: [Elecraft] WM-2 operation
>
I would certainly echo Ken's review of the W2. It is, as with all Elecraft
products, a joy to build and performs very well. I really like being able to
adjust the intensity of the LEDs. I noticed that the assembly manual
mentions using flat head screws in beveled holes on the front of the botto
Hi James,
The Kenwood knob needed to be machined slightly to fit the nut holding the
encoder in the front panel and the hole was drilled slightly larger to
accommodate the K3 encoder shaft.
Todd, WA7U
- Original Message -
From: "James Sarte"
To: "'T Gahagan
Several of you wanted a photo of the K2 knob being used as the K3 B-VFO knob.
Here's the link and thanks to Don, WB8YQJ for posting the photos.
Todd, WA7U
http://www.zerobeat.net/mediawiki/index.php/SpotLight_on_K3
__
Elecraft mailing
Hi Dave,
I've been using a K2 vfo knob for my K3 B vfo for some months now. The
profile of the back of the K2 knob is proper to allow for clearance of the
fastening nut on the B encoder shaft. However, the shafts are different
diameters. The K2 VFO shaft is slightly smaller so the hole must
The newer version of the software should take care of the problem. Check
the Elecraft web site.
73, WA7U
- Original Message -
From: "John"
To:
Sent: Saturday, February 28, 2009 5:11 PM
Subject: [Elecraft] [K3] KDVR3 enable
>I finally installed my KDVR3 today, it's been here for a
I operated in the 10 meter contest for several hours yesterday using my K3
and laptop computer using N1MM. I noticed low audio and increased it by
going to the Hi setting in the config menu. It helped some but audio still
seemed low. Speaker audio finally failed completely. Also, a component
I just received my K3 carrying case from Rose ([EMAIL PROTECTED]).
The case is very well made and the embroidery of my call sign is perfect.
It's light weight but well padded and really protects the K3 from bumps and
scratches. I'm amazed how perfect the sewing and the general fit are.
I have
From what I understand you must turn off the microphone bias in the menu. I
have a Heil pro-set and had to do this. If you have the Heil headset made
for use with the K2 you leave it on. If I am wrong someone please correct
me.
Todd, WA7U
K2/100 #726
K3/100 #726
- Original Message --
35 matches
Mail list logo