I just received my KXPD2 Keyer. First impressions are that it is very nice.
I say that only because the KXPD1 that I got for my KX1 was a booger to
adjust. My question is about the extra parts that arrived with the KXPD2,
came with a loose spring and two Allen screws. Additionally the photos I
My KX1 remains keyed when I use a straight key, but works fine when I change
settings and use a paddle. Any recommendations?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My KX1 works fine with a paddle. When set to "hand" for a straight key,
when I press the key the KX1 stays keyed until I unplug the key
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Steve,
The KX1 uses the existing LED. Tom has some great directions, follow the
link.
http://www.n0ss.net/k6xx_cw_tun_ind_smd_v2_assy-align_kx1_ver.pdf
73 K2CG
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of STEPHEN W BANKS
Sent: Saturday
Bob,
The Pelican Micro 1060 is a nice fit for the KX1
73 Chuck G. K2CG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
American Morse has several nice key kits, nicely engineering very sturdy
solid keys. http://www.americanmorse.com/index.htm
73 Chuck
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Doug Person
Sent: Thursday, January 24, 2008 9:56 PM
To: Elecraft
The Polar Bear Moonlight Madness Event will be taking place tomorrow 19
January, 2008. QRP operating frequencies 20, 30, 40 and 80 meters between
1700-2300 UTC. Our fingers may be a little cold so “BEAR” with us if our
replies are a little slow.
Several Polar Bear QRP Operators will be
Werner,
I believe that the modification that Bill is referring to is found on the
following web pages http://www.kk7p.com/k2kpa100.html#KAT100
And not in the Elecraft manuals
73 K2CG
Chuck G.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dr. Werner
I built my external speaker using Tom Hammond's excellent instructions and
amp. http://k2qrp.com/Radio%20Projects.htm
I have since improved the basic speaker amp combination with the New England
QRP NESCAF audio filter http://newenglandqrp.org/nescaf
I am very pleased with the results
73, Chuck
Does Elecraft have any plans to make available some EC3, EC2, or EC1
Enclosures available in the K3 paint color?
As nice as the K3 may be I can't imagine that very many of us Elecrafter's
will remain idle with a stock radio for very long before we decide that we
need some type of custom
I am considering changing out all of my antenna connectors over from PL-259/
S0-239, and converting them to N Connectors/ UG-58B/U. Are there any issues
that I should be concerned with on my KAT100 and KPA100?
73 K2CG
Chuck Gehring
___
Elecraft
I am looking for instructions to build or modify a KFL1-2 filter board for
160 meter operations.
73 K2CG
Chuck G.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
VDC
U1-12 5 VDC
U1-13 4.9 VDC
U1-14 0VDC
U1-15 5 VDC
U1-16 5VDC
J1-1 0VDC
J1-2 -6 VDC
J1-3 0VDC
J1-4 OVDC
J1-5 0VDC
J1-6 5.5 VDC
J1-7 0VDC
J1-8 14VDC
J1-9 8VDC
Comments, suggestions would be appreciated
73 K2CG
Chuck Gehring
P.S. I really feel so lucky to have an Elecraft
and it
will be about 2 feet from the computer and the router antenna about 2-3
feet. I am currently considering the Linksys Wireless-N WRT300N.
Recommendations and replies off-line would be appreciated.
73 K2CG
Chuck Gehring
___
Elecraft mailing list
Post
the time with
my K2. They work great.
73 K2CG
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
HFProp by Julian Moss is not FREE, It is shareware, sure you can down load
it and use it as an Unregistered, but I ma shure that Julian would
appreciate the donation.
HFProp is a very fine tool, so support shareware
73 KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED
, but maybe by the time I am
copying and sending 35-40 wpm I will be ready to let my Elecraft Hex Key retire.
http://saylorsmachine.com/wk4ds.html
[EMAIL PROTECTED]
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Darwin wrote:
And a related question. At what power level does the fan come on?
-Original Message-
It always bothers me when the fan comes on even though I realize that it
is normal and desirable behavior.
IMHO
It is my understanding the the Power transistors in the KPA-100
It's perfect!!! The Peanut sized Tuner with an Elephant sized
performance and memory to stomp on the competition.
73 KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of wayne burdick
Sent: Friday, May 26, 2006 3:49 PM
To: Alexandra Carter
]
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
pictures.
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
poles
http://tinyurl.com/nx3yv Gorilla Tape
http://tinyurl.com/mm4wa Plano Jumbo Airliner Case
73, KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Monday, May 08, 2006 5:14 PM
To: elecraft@mailman.qth.net
http://tinyurl.com/kr5nf
Try this URL
73 KI4DGH
Chuck G
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
and CW Filter Gain
adjusted for 12db gain to be very helpful in picking up the weak stations. I
really like being able to tweak and adjust the KDSP2 filters with its very
large selection of settings and adjustments.
73, KI4DGH
Chuck Gehring
. Previously L-68, H-4, now they are L-70, H-3. Of course I used
my XG-2 for my S9 signal source.
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
they listed Black 31' Jackite poles. It was delivered to my door
in four days direct from Jackiite.
http://tinyurl.com/l8okb
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
I would pass on the
tip.
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
to
the power switch but when I turn on the switch nothing happens, no LED no
relays clicking nothing. I had a KXB30 installed and completely removed the
KXB30 board and all wires. I would really appreciate some help
troubleshooting this problem.
73 KI4DGH
Chuck Gehring
that the
manual would have told me what I did and could have spared myself the public
humiliation.
Thanks again
73 KI4DGH
Chuck Gehring
-Original Message-
From: Ron D'Eau Claire [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 25, 2006 7:05 PM
To: 'Chuck Gehring'; elecraft@mailman.qth.net
Subject
Is there any word on when the KX1 30 and 80 meter module will be available?
73 KI4DGH
Chuck
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
and got me up and on the air so I would like to see
them in continued service. Code Quick tapes $10 in the US.
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
The response was very quick. The FT-100 Tuning knob and Code Quick Programs
have already been spoken for.
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
the tree,
Bah humbug!
http://tinyurl.com/awrdb
72 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Chuck Gehring
-Original Message-
Subject: [Elecraft] Connecting Kent Straight Key and Paddle
For instance what kind of plug (for each wire) and how soldered to
the plug.
Just to take my best guess I've already bought RS Part 274-284 1/8
stereo phone plug, and wonder
if these will work
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
The Elecraft Mini-Module DL1 Dummy Load has test points that allow you to
use a DMM to measure out put. I can't imagine anything in that price range
being more accurate
73, KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of J. Coote
Sent
connecting
to Pin 12 of U3, U4 and RYLoad.
Any recommendations
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
Please accept my apologies for wasting the bandwidth. I was suffering from
a case of Cranial Rectal Inversion I was not counting the pins on U2
correctly. Resistance checks okay. KAT 100 passed initial tests.
Chuck Gehring
I am building the KAT 100, the Resistance checks look fine except
... Tell your friends about the K9YA Telegraph!
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
Please DONT Reply offline. I don't think I am the only one that would like
to hear some more discussion on this subject
Thanks
73 KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, March 29, 2005 6:28 AM
I have a pair of Radio Shack NiCad RC model car batteries 7.2 vdc 2000 mAh.
I have but them in series and get 16vdc when fully charged. In the past I
have put a 12 volt fan on the batteries until the charged was reduced to
13.5 vdc and then used them as an external power supply for my KX1.
I have seen a previous posting about the extended side panels for the K2.
Are they still available? Does nayone have an e-mail address for Randy
Hagenrader K3QO formerly K4QO formerly WJ4P
73 KI4DGH
Chuck G.
___
Elecraft mailing list
Post to:
ended without a response.
Comments Recommendations would be appreciated
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
for the
recommendations and reassurance that I was not the only one who did
something stupid, by installing a diode in backwards. Your secret is safe
with me guys.
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
as
indicated on the internal power meter.
Am I making a mountain out of a mole hill here or is something wrong.
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
the ceramic
around the leads is 2/32 Pictures would be great.
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
the reflector archives and double checking for shorts again, but I am afraid
that I am overlooking the same spot each time.
73 KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
It's not pasword protected the link had a typo, it should be a forward slash
after roadwarriorcontent
try
http://www.thetravelinsider.info/roadwarriorcontent/planequietnc6headphones.
htm
73 KI4DGH
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf
testing equipment
without adult supervision?
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
that I am one
very happy and excited customer.
Check out the August 2004 Bacon Bits newsletter for more information and
pictures.
http://www.fpqrp.com/BB0804.pdf
or contact Richard at [EMAIL PROTECTED]
73, KI4DGH
Chuck Gehring
___
Elecraft mailing list
I have an old Astatic D104 Desk Microphone that I would like to modify to
use with a modern Transceiver. Does anyone have some suggestions?
73, KI4DGH Chuck G.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
KX1 #641
Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John von Gonten
Sent: Thursday, June 24, 2004 5:40 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX1 Receiver Drain
Ok, now that I have gotten replacement toroids from the Toroid
Another Tip you may or may not find useful. Laminate your logs with clear
plastic shelving paper. You can then write on it with pencil, transfer your
log, erase and use them over.
73, KI4DGH Chuck Gehring
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf
of a
response from the 30B.
Chuck Gehring
KI4DGH
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc):
http://mailman.qth.net
54 matches
Mail list logo