Anyone out there got some video (YouTube etc?) of their K3 with the P3 in
use?
73,
Andy
http://gd0tep.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto
because they want the band scope built in or some thing else.
>>So, I've said more than my peace. Elecraft if you ever build a larger case
count me In.
Yes, I'd have one.. I miss the scope on the front of my 756pro2. Well, I
don't actually as it sits next to the K3. :-) but I sure would love a
This thread has been quite interesting
I respect the station that can sit and rag chew on CW, I've tried it on one
of the HF bands, and found it very demanding on the brain.
On 6m... If the band was open with more than one hop of SpE, I'll be chasing
new grid squares, or DXCC countries. I do
Yes... this is something I'd like to see as well
In the RSGB/IARU 50mhz annual contest, the station here consists of 4 large
antenna systems and 4 receivers. It would be beneficial to me if I was able
to drop that down to 2 K3's!
73,
Andy
http://gd0tep.com
-Original Message-
From: e
>> MicroHam pots the inside of the connector with white RTV, so it is
impossible to know if there is any sort of ground pin issue.
Yes, they do... But, it pulls off quite easy, and what's left I have removed
with an old stiff tooth brush.
73,
Andy
http://gd0tep.com
__
peakers.
Select the levels tab and make sure all of the devices below the line (all
of the inputs) are muted. In Windows XP, I think you need to open the
"Advanced" features and turn off "monitor while recording" (or select "do
not monitor while recording") or something s
Hi to the group,
I have connected my K3 to my PC so I can use WSJT, my sound card is the
'Sound Blaster Audigy 2 ZS Audio'
I seem to have some sort of audio feed back when I get the radio to TX.
The sound card output is directly connected to the K3, and for the moment
PTT keying is via a USB mic
Some interesting sites shared here for the 50mhz enthusiast, but perhaps one
of the best sites hasn't had a mention.
www.on4kst.com
Real time chat with other like minded people, plus separate web pages for
region 1 or region 2 (although when the band is open, you'll see 'users'
logged onto both)
As I instigated this thread...
I received the relative information from W4TV. And, although it wasn't what
I was originally looking for, it works just fine.
I now have the USB2 interface linked to the K3 and the 1K-FA.
Thanks again to those who replied to my original email.
73,
Andy
http://gd0t
Hello to the group again,
I want to connect my K3 to my 1K-FA amplifier, the amplifier manual isn't to
clear (to me anyway) on the connections that need to be used.
On the amplifier 15pin plug, I use pins 1, 9 & 14, yes it's that simple.
On the K3 RS232 I connect the amplifier pin 1 to K3 pin 3
d, my thanks to everyone for the response to my original query.
73,
Andy
http://gd0tep.com
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: 26 June 2010 17:57
To: GD0TEP
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] PA set up issues
Andy,
As Roger sugg
attempts results in the radio tripping
off @ 86w
So, now what should I try??
73,
Andy
http://gd0tep.com
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: 25 June 2010 22:50
To: GD0TEP
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] PA set up issues
Andy,
Hi to the group,
I've just installed my KPA3 100w upgrade into my factory built K3.
I've followed the calibration procedure starting out with 5w per band, and
then moved to 50w per band, as per instructions.
I must be missing something, or perhaps not understand what I'm reading as
once
listening on the 2nd receiver. Thanks Eric.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: 02 April 2009 18:19
To: a...@cablespeed.com
Cc: 'Andy GD0TEP'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and P
No hints then as to what they might be... just a teaser... DOH!...
73 Andy
http://www.gd0tep.com
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Darwin, Keith
Sent: 02 April 2009 18:22
To: elecraft@mailman.qth.net
Subject:
OK Greg, I'll be trying this tonight when I'm at the shack.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Greg - AB7R [mailto:a...@cablespeed.com]
Sent: 02 April 2009 16:21
To: 'Andy GD0TEP'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and PR6 q
April 2009 15:45
To: elecraft@mailman.qth.net; 'Andy GD0TEP'
Subject: Re: [Elecraft] K3 and PR6 question
I suppose if you REALLY wanted to do this you could use a second PR6 and
run your
RX ant to the PR6 input and the output connected to the AUX RF connector if
its
installed and K
OK Bud, that answers that question then... thanks.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Bud Semon N7CW [mailto:n...@cableone.net]
Sent: 02 April 2009 14:57
To: 'Andy GD0TEP'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 and PR6 question
Hi Andy,
T
Hello to the group.
I must be missing something in the manual...
If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on
the sub receiver that is connected to the antenna via the BNC RX antenna
(with the SUB indicated on the display) is the PR6 pre-amp in line with the
sub re
there is the TX INH function that can be configured for pin 7 of the
ACC connector
Although I didn't instigate the question, I'd missed that option Don, thanks
for that.
73 Andy
http://www.gd0tep.com
___
Elecraft mailing list
Post to: Elecraft@mailm
Thats quite expensive!
I currently pay £8.89 per year! Thats about $13 for a year, and thats for
a real web site, email address etc..
http://www.fasthosts.co.uk/
73 Andy
http://www.gd0tep.com
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Hi Group,
My PR6 pre-amp arrived here today and I've got it connected.
I'm not sure what I'm doing wrong, but I simply can't get it to work.
12v is taken from the AUX supply. (The 12v is good)
The White CTRL lead is connected to pin 11 on ACC
On the 6m band I've set CONFIG: DIGOUT1 to ON
I've r
English was never my best subject, but... I think he had it right first time
round... it's their name, rather than two words...
As per their web site: C Copyright Parcelforce Worldwide 2008. All Rights
Reserved
(that is unless the royal mail got it wrong as well?)
73
Andy
http://www.gd0tep.com
As some one who bought the K3 purely for it's RX performance on 6m, can some
one tell me once and for all if it is as good as, or better/worse than,
other radios like the Icom 756 pro etc...
It was my understanding from information provided that it was, is this not
the case??
73
Andy
http://www.g
Hi Lance & group.
>I also would appreciate it if somebody knows how to mute the K3 receiver
when a
>separate XMTR is being used. I searched the manual but could not find it.
Something I've done to overcome a similar problem was TXing the K3 as well,
perhaps have it go split somewhere away from
Was there ever an answer to this for guys in Europe?
Scanning across 6m is a 'must have' for me...
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Simon Brown (HB9DRV)
Sent: 17 March 2008 17:33
To: elecraft@mailman.qth.net
Subjec
s fine!
So, thanks to all who responded, all very helpful suggestions and ideas.
73
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of gd0tep
Sent: 02 October 2008 19:17
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] Elecraft K3 +
se I can look at...
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of gd0tep
Sent: 02 October 2008 17:02
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft K3 + Microham?
A quick question to the group.
Is anyone on here
A quick question to the group.
Is anyone on here using a K3 and a Microham interface?
Would appreciate an email regarding settings etc.
Thanks,
Andy
http://gd0tep.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subs
ice in the monitor to judge how much compression is good for you.
Of course, there will be no power output in SSB without any audio input.
73,
Don W3FPR
gd0tep wrote:
> Hello to the group.
>
> K3 01684 'factory built' was delivered last week, and I've only found time
> to p
Hello to the group.
K3 01684 'factory built' was delivered last week, and I've only found time
to power it up today... It's a K3/10 with the KXV3.
I'm stuck on getting power out on SSB. It took a little while to figure out
the CW section, and that now works fine. I've gone over the manual a few
t
Ordered mine on the 22nd of January, received email from Katie on Friday.
There's a small delay on the KRX3 Sub Receiver, but it could be shipped soon
if I wanted it.
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Peter
Sent: 07
That's good Mike, I can't wait for my K3 to arrive so I can wsjt on 6m EME,
I'm keen to see how good the RX is.
73
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Harris
Sent: 13 February 2008 23:10
To: Elecraft@mailman.qth.net
Hi group,
Having placed an order for a K3 in mid January, can anyone give me a clue as
to approximately what will the delay be between now and delivery might be??
Cheers,
Andy
http://gd0tep.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.
34 matches
Mail list logo